<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>tema Bad G-Code Output en FeatureCAM Forum</title>
    <link>https://forums.autodesk.com/t5/featurecam-forum/bad-g-code-output/m-p/12196919#M7691</link>
    <description>&lt;P&gt;Why is FC outputting this erroneous roughing code?&lt;/P&gt;&lt;P&gt;Finish bore is .895". Roughing op programmed to leave 0.01" for finish.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;N0200 (MAIN SPINDLE, TURNING)&lt;BR /&gt;(ROUGH BORE BORE1)&lt;BR /&gt;M22&lt;BR /&gt;G18 G40 G54 G80 G97 G99&lt;BR /&gt;G28 V0.0&lt;BR /&gt;G28 U0.0&lt;BR /&gt;G00 Z5.0&lt;BR /&gt;(WN_B_0625_80_RH_015)&lt;BR /&gt;T0202&lt;BR /&gt;M75&lt;BR /&gt;M42&lt;BR /&gt;(ROUGH BORE BORE1)&lt;BR /&gt;G50 S2500&lt;BR /&gt;G97 S1424 M03 P11&lt;BR /&gt;(RAPID TURN CUSTOM)&lt;BR /&gt;G00 Z0.1114&lt;BR /&gt;X0.885 Y0.0&lt;BR /&gt;/ M8&lt;BR /&gt;G96 S330&lt;BR /&gt;G01 Z-1.1815 F0.01 &lt;FONT color="#FF6600"&gt;"ROUGHS BORE HERE AT X0.885 TO DEPTH"&lt;/FONT&gt;&lt;BR /&gt;X0.7125&lt;BR /&gt;(RAPID TURN)&lt;BR /&gt;G00 Z0.1114&lt;BR /&gt;G01 X0.9544&lt;BR /&gt;Z-0.0043&lt;BR /&gt;X0.885 Z-0.0392 &lt;FONT color="#FF6600"&gt;"ROUGHS CHAMFER HERE"&lt;/FONT&gt;&lt;BR /&gt;X0.886 Z-1.1815 &lt;FONT color="#FF6600"&gt;"ERRONEOUS CUT ON 0.001" OVERSIZE TAPER TO DEPTH"&lt;/FONT&gt;&lt;BR /&gt;X0.785&lt;BR /&gt;(RAPID TURN)&lt;BR /&gt;G00 Z0.1&lt;/P&gt;&lt;P&gt;(TOOL CHANGE)&lt;BR /&gt;M05 P11 S0 G97 M9&lt;BR /&gt;G28 V0.0&lt;BR /&gt;G28 U0.0&lt;BR /&gt;G00 Z5.0&lt;BR /&gt;(OPTION STOP)&lt;BR /&gt;M01&lt;/P&gt;</description>
    <pubDate>Fri, 25 Aug 2023 15:26:25 GMT</pubDate>
    <dc:creator>byers5EKHB</dc:creator>
    <dc:date>2023-08-25T15:26:25Z</dc:date>
    <item>
      <title>Bad G-Code Output</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/bad-g-code-output/m-p/12196919#M7691</link>
      <description>&lt;P&gt;Why is FC outputting this erroneous roughing code?&lt;/P&gt;&lt;P&gt;Finish bore is .895". Roughing op programmed to leave 0.01" for finish.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;N0200 (MAIN SPINDLE, TURNING)&lt;BR /&gt;(ROUGH BORE BORE1)&lt;BR /&gt;M22&lt;BR /&gt;G18 G40 G54 G80 G97 G99&lt;BR /&gt;G28 V0.0&lt;BR /&gt;G28 U0.0&lt;BR /&gt;G00 Z5.0&lt;BR /&gt;(WN_B_0625_80_RH_015)&lt;BR /&gt;T0202&lt;BR /&gt;M75&lt;BR /&gt;M42&lt;BR /&gt;(ROUGH BORE BORE1)&lt;BR /&gt;G50 S2500&lt;BR /&gt;G97 S1424 M03 P11&lt;BR /&gt;(RAPID TURN CUSTOM)&lt;BR /&gt;G00 Z0.1114&lt;BR /&gt;X0.885 Y0.0&lt;BR /&gt;/ M8&lt;BR /&gt;G96 S330&lt;BR /&gt;G01 Z-1.1815 F0.01 &lt;FONT color="#FF6600"&gt;"ROUGHS BORE HERE AT X0.885 TO DEPTH"&lt;/FONT&gt;&lt;BR /&gt;X0.7125&lt;BR /&gt;(RAPID TURN)&lt;BR /&gt;G00 Z0.1114&lt;BR /&gt;G01 X0.9544&lt;BR /&gt;Z-0.0043&lt;BR /&gt;X0.885 Z-0.0392 &lt;FONT color="#FF6600"&gt;"ROUGHS CHAMFER HERE"&lt;/FONT&gt;&lt;BR /&gt;X0.886 Z-1.1815 &lt;FONT color="#FF6600"&gt;"ERRONEOUS CUT ON 0.001" OVERSIZE TAPER TO DEPTH"&lt;/FONT&gt;&lt;BR /&gt;X0.785&lt;BR /&gt;(RAPID TURN)&lt;BR /&gt;G00 Z0.1&lt;/P&gt;&lt;P&gt;(TOOL CHANGE)&lt;BR /&gt;M05 P11 S0 G97 M9&lt;BR /&gt;G28 V0.0&lt;BR /&gt;G28 U0.0&lt;BR /&gt;G00 Z5.0&lt;BR /&gt;(OPTION STOP)&lt;BR /&gt;M01&lt;/P&gt;</description>
      <pubDate>Fri, 25 Aug 2023 15:26:25 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/bad-g-code-output/m-p/12196919#M7691</guid>
      <dc:creator>byers5EKHB</dc:creator>
      <dc:date>2023-08-25T15:26:25Z</dc:date>
    </item>
    <item>
      <title>Re: Bad G-Code Output</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/bad-g-code-output/m-p/12201948#M7692</link>
      <description>&lt;P&gt;That code appears to be turning a slight (.001) taper from Z-.0392 to Z-1.1815, maybe the line or curve is not parallel to the Z axis?&lt;/P&gt;</description>
      <pubDate>Mon, 28 Aug 2023 16:43:39 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/bad-g-code-output/m-p/12201948#M7692</guid>
      <dc:creator>jeff_brower</dc:creator>
      <dc:date>2023-08-28T16:43:39Z</dc:date>
    </item>
    <item>
      <title>Re: Bad G-Code Output</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/bad-g-code-output/m-p/12202239#M7693</link>
      <description>The cut curve is parallel to Z. It already took the rough pass at X0.885 to the Z-1.1815 (see a few lines up). It should have retracted after roughing the chamfer at X0.885 Z-0.0392.</description>
      <pubDate>Mon, 28 Aug 2023 19:13:52 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/bad-g-code-output/m-p/12202239#M7693</guid>
      <dc:creator>byers5EKHB</dc:creator>
      <dc:date>2023-08-28T19:13:52Z</dc:date>
    </item>
  </channel>
</rss>

