<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>tema Re: 2019  Latest Updates | New Knowledge Network Articles | FeatureCAM en FeatureCAM Forum</title>
    <link>https://forums.autodesk.com/t5/featurecam-forum/2019-latest-updates-new-knowledge-network-articles-featurecam/m-p/8511345#M4143</link>
    <description>&lt;P&gt;December 2019&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="920" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-add-cutter-comp-to-a-drill-mill-operation-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/How-to-add-cutter-comp-to-a-drill-mill-operation-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-add-cutter-comp-to-a-drill-mill-operation-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-add-cutter-comp-to-a-drill-mill-operation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Creating-a-Setup-with-no-surface-to-align-to-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/Creating-a-Setup-with-no-surface-to-align-to-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Creating-a-Setup-with-no-surface-to-align-to-in-FeatureCAM" target="_blank" rel="noopener"&gt;Creating-a-Setup-with-no-surface-to-align-to-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-to-open-xbuild-in-FeatureCam-2017&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/Unable-to-open-xbuild-in-FeatureCam-2017"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-open-xbuild-in-FeatureCam-2017" target="_blank" rel="noopener"&gt;Unable-to-open-xbuild-in-FeatureCam-2017&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-Form-tool-for-Turning-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/How-to-create-a-Form-tool-for-Turning-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-Form-tool-for-Turning-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-Form-tool-for-Turning-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;5-axis-swarf-toolpath-gouging-part-despite-showing-correct-simulation-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/5-axis-swarf-toolpath-gouging-part-despite-showing-correct-simulation-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/5-axis-swarf-toolpath-gouging-part-despite-showing-correct-simulation-in-FeatureCAM" target="_blank" rel="noopener"&gt;5-axis-swarf-toolpath-gouging-part-despite-showing-correct-simulation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Which-turning-toolpaths-will-use-a-round-insert-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/Which-turning-toolpaths-will-use-a-round-insert-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Which-turning-toolpaths-will-use-a-round-insert-in-FeatureCAM" target="_blank" rel="noopener"&gt;Which-turning-toolpaths-will-use-a-round-insert-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="960" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-optimize-a-side-finishing-with-swarf-toolpath-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/How-to-optimize-a-side-finishing-with-swarf-toolpath-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-optimize-a-side-finishing-with-swarf-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-optimize-a-side-finishing-with-swarf-toolpath-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;The-Simulation-package-cannot-model-the-tool-for-an-3D-Simulation-at-FeatureCam&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/The-Simulation-package-cannot-model-the-tool-for-an-3D-Simulation-at-FeatureCam"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-Simulation-package-cannot-model-the-tool-for-an-3D-Simulation-at-FeatureCam" target="_blank" rel="noopener"&gt;The-Simulation-package-cannot-model-the-tool-for-an-3D-Simulation-at-FeatureCam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-feedrate-on-parts-of-toolpath-in-FeatrueCam&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/How-to-change-feedrate-on-parts-of-toolpath-in-FeatrueCam"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-feedrate-on-parts-of-toolpath-in-FeatrueCam" target="_blank" rel="noopener"&gt;How-to-change-feedrate-on-parts-of-toolpath-in-FeatrueCam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Bar-feed-position-incorrect-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/Bar-feed-position-incorrect-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Bar-feed-position-incorrect-in-FeatureCAM" target="_blank" rel="noopener"&gt;Bar-feed-position-incorrect-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;3D-simulation-is-wrong-with-advance-turn-mill-operation-using-alternate-direction-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/3D-simulation-is-wrong-with-advance-turn-mill-operation-using-alternate-direction-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/3D-simulation-is-wrong-with-advance-turn-mill-operation-using-alternate-direction-in-FeatureCAM" target="_blank" rel="noopener"&gt;3D-simulation-is-wrong-with-advance-turn-mill-operation-using-alternate-direction-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-reduce-the-ISO-file-size-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/How-to-reduce-the-ISO-file-size-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-reduce-the-ISO-file-size-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-reduce-the-ISO-file-size-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="922" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;5-axis-toolpath-is-indexing-out-of-position-by-180-degrees-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/5-axis-toolpath-is-indexing-out-of-position-by-180-degrees-in-FeatureCAM" target="_blank" rel="noopener"&gt;5-axis-toolpath-is-indexing-out-of-position-by-180-degrees-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-How-do-i-measure-model-sizes&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-How-do-i-measure-model-sizes" target="_blank" rel="noopener"&gt;FeatureCAM-How-do-i-measure-model-sizes&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-side-feature-with-feature-recognition-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-side-feature-with-feature-recognition-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-side-feature-with-feature-recognition-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-avoid-tool-collision-at-the-end-of-an-ID-boring-toolpath-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-avoid-tool-collision-at-the-end-of-an-ID-boring-toolpath-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-avoid-tool-collision-at-the-end-of-an-ID-boring-toolpath-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;IGES-export-of-FeatureCAM-exports-all-solids-as-only-one&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/IGES-export-of-FeatureCAM-exports-all-solids-as-only-one" target="_blank" rel="noopener"&gt;IGES-export-of-FeatureCAM-exports-all-solids-as-only-one&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-convert-a-project-from-imperial-to-metric-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-convert-a-project-from-imperial-to-metric-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-convert-a-project-from-imperial-to-metric-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Query-for-newer-version-of-CAD-model-no-longer-appears-in-FeatureCam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Query-for-newer-version-of-CAD-model-no-longer-appears-in-FeatureCam" target="_blank" rel="noopener"&gt;Query-for-newer-version-of-CAD-model-no-longer-appears-in-FeatureCam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-multiple-chamfer-toolpaths-with-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-multiple-chamfer-toolpaths-with-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-multiple-chamfer-toolpaths-with-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-Mill-Diameter-Polar-toolpath-with-a-flat-endmill-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-Mill-Diameter-Polar-toolpath-with-a-flat-endmill-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-create-a-Mill-Diameter-Polar-toolpath-with-a-flat-endmill-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Tool-axis-of-wrapped-toolpath-is-wrong-when-Setup-X-Axis-and-Stock-X-Axis-do-not-match-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Tool-axis-of-wrapped-toolpath-is-wrong-when-Setup-X-Axis-and-Stock-X-Axis-do-not-match-in-FeatureCAM" target="_blank" rel="noopener"&gt;Tool-axis-of-wrapped-toolpath-is-wrong-when-Setup-X-Axis-and-Stock-X-Axis-do-not-match-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-Multi-axis-Flowline-toolpath-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-Multi-axis-Flowline-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-Multi-axis-Flowline-toolpath-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;When-opening-an-old-turn-mill-project-in-FeatureCAM-Standard-none-of-the-features-can-be-simulated&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/When-opening-an-old-turn-mill-project-in-FeatureCAM-Standard-none-of-the-features-can-be-simulated" target="_blank" rel="noopener"&gt;When-opening-an-old-turn-mill-project-in-FeatureCAM-Standard-none-of-the-features-can-be-simulated&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-machine-a-user-defined-chamfer-angle-as-a-side-or-pocket-feature-in-Featurecam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-machine-a-user-defined-chamfer-angle-as-a-side-or-pocket-feature-in-Featurecam" target="_blank" rel="noopener"&gt;How-to-machine-a-user-defined-chamfer-angle-as-a-side-or-pocket-feature-in-Featurecam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-add-offset-axis-in-a-toolpath-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-add-offset-axis-in-a-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-add-offset-axis-in-a-toolpath-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;The-Automatic-tool-Selection-selects-wrong-tool-diameter-in-FeatureCam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-Automatic-tool-Selection-selects-wrong-tool-diameter-in-FeatureCam" target="_blank" rel="noopener"&gt;The-Automatic-tool-Selection-selects-wrong-tool-diameter-in-FeatureCam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-thread-mill-tool-with-taper-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-thread-mill-tool-with-taper-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-thread-mill-tool-with-taper-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Roughing-pass-not-posting-in-a-turning-document-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Roughing-pass-not-posting-in-a-turning-document-in-FeatureCAM" target="_blank" rel="noopener"&gt;Roughing-pass-not-posting-in-a-turning-document-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-Change-the-Tool-Orientation-for-a-Slot-in-a-Turn-Mill-Project-at-FeatureCam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-Change-the-Tool-Orientation-for-a-Slot-in-a-Turn-Mill-Project-at-FeatureCam" target="_blank" rel="noopener"&gt;How-to-Change-the-Tool-Orientation-for-a-Slot-in-a-Turn-Mill-Project-at-FeatureCam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;TPU01-code-error-when-simulating-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/TPU01-code-error-when-simulating-in-FeatureCAM" target="_blank" rel="noopener"&gt;TPU01-code-error-when-simulating-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Toolpaths-converted-to-Toolpath-Features-do-not-retract-for-indexing-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Toolpaths-converted-to-Toolpath-Features-do-not-retract-for-indexing-in-FeatureCAM" target="_blank" rel="noopener"&gt;Toolpaths-converted-to-Toolpath-Features-do-not-retract-for-indexing-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-to-do-roughing-in-Mill-Cylinder-window-with-3D-surfacing-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-do-roughing-in-Mill-Cylinder-window-with-3D-surfacing-in-PartMaker" target="_blank" rel="noopener"&gt;Unable-to-do-roughing-in-Mill-Cylinder-window-with-3D-surfacing-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-turn-profile-curve-from-a-solid-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-turn-profile-curve-from-a-solid-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-turn-profile-curve-from-a-solid-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Imported-toolpath-tilts-in-PowerMill-but-not-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Imported-toolpath-tilts-in-PowerMill-but-not-in-PartMaker" target="_blank" rel="noopener"&gt;Imported-toolpath-tilts-in-PowerMill-but-not-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="993" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-use-a-right-angle-head-90-degree-head-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-use-a-right-angle-head-90-degree-head-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-use-a-right-angle-head-90-degree-head-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;The-simulation-package-cannot-model-the-tool-in-3D-simulation-with-a-form-tool-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-simulation-package-cannot-model-the-tool-in-3D-simulation-with-a-form-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;The-simulation-package-cannot-model-the-tool-in-3D-simulation-with-a-form-tool-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Recognising-holes-on-a-p-c-d-on-a-turnmill-in-Featurecam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Recognising-holes-on-a-p-c-d-on-a-turnmill-in-Featurecam" target="_blank" rel="noopener"&gt;Recognising-holes-on-a-p-c-d-on-a-turnmill-in-Featurecam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;114-format-error-in-macro-alarm-on-machine-tool-when-running-NC-code-from-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/114-format-error-in-macro-alarm-on-machine-tool-when-running-NC-code-from-FeatureCAM" target="_blank" rel="noopener"&gt;114-format-error-in-macro-alarm-on-machine-tool-when-running-NC-code-from-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;November 2019&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="1032" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-4-axis-project-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-4-axis-project-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-4-axis-project-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-display-eccentric-stock-in-Featurecam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-display-eccentric-stock-in-Featurecam" target="_blank" rel="noopener"&gt;How-to-display-eccentric-stock-in-Featurecam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Stay-at-Depth-setting-in-PartMaker-Contour-On-milling-operation-causes-Rapid-into-stock-in-simulation-and-code&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Stay-at-Depth-setting-in-PartMaker-Contour-On-milling-operation-causes-Rapid-into-stock-in-simulation-and-code" target="_blank" rel="noopener"&gt;Stay-at-Depth-setting-in-PartMaker-Contour-On-milling-operation-causes-Rapid-into-stock-in-simulation-and-code&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;PartMaker-cycle-time-is-incorrect-when-feeds-and-speeds-are-set-to-Calculated-in-Tool-Definition&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PartMaker-cycle-time-is-incorrect-when-feeds-and-speeds-are-set-to-Calculated-in-Tool-Definition" target="_blank" rel="noopener"&gt;PartMaker-cycle-time-is-incorrect-when-feeds-and-speeds-are-set-to-Calculated-in-Tool-Definition&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-doesn-t-launch-after-selecting-the-license-type&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-doesn-t-launch-after-selecting-the-license-type" target="_blank" rel="noopener"&gt;FeatureCAM-doesn-t-launch-after-selecting-the-license-type&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Number-of-finish-passes-not-being-respected-in-a-side-feature-finishing-operation-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Number-of-finish-passes-not-being-respected-in-a-side-feature-finishing-operation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Number-of-finish-passes-not-being-respected-in-a-side-feature-finishing-operation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="1032" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;BIM-360-Docs-Multiple-attributes-with-the-same-name-show-in-document-subfolder&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/BIM-360-Docs-Multiple-attributes-with-the-same-name-show-in-document-subfolder" target="_blank" rel="noopener"&gt;BIM-360-Docs-Multiple-attributes-with-the-same-name-show-in-document-subfolder&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-an-undercut-internal-groove-in-FeatureCAM-turning&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-an-undercut-internal-groove-in-FeatureCAM-turning" target="_blank" rel="noopener"&gt;How-to-create-an-undercut-internal-groove-in-FeatureCAM-turning&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="920" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;nc-code-from-featurecam-is-too-large-for-machine-controller&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/nc-code-from-featurecam-is-too-large-for-machine-controller" target="_blank" rel="noopener"&gt;nc-code-from-featurecam-is-too-large-for-machine-controller&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-select-a-tailstock-support-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-select-a-tailstock-support-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-select-a-tailstock-support-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-to-import-Solidworks-2020-file-into-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-import-Solidworks-2020-file-into-FeatureCAM" target="_blank" rel="noopener"&gt;Unable-to-import-Solidworks-2020-file-into-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Ribbon-or-menu-customization-has-disappeared-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Ribbon-or-menu-customization-has-disappeared-in-FeatureCAM" target="_blank" rel="noopener"&gt;Ribbon-or-menu-customization-has-disappeared-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Machine-simulation-is-different-to-3D-simulation-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Machine-simulation-is-different-to-3D-simulation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Machine-simulation-is-different-to-3D-simulation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;NC-code-not-in-main-and-sub-program-format-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/NC-code-not-in-main-and-sub-program-format-in-FeatureCAM" target="_blank" rel="noopener"&gt;NC-code-not-in-main-and-sub-program-format-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-reduce-NC-Code-data-for-wrapping-operation-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-reduce-NC-Code-data-for-wrapping-operation-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-reduce-NC-Code-data-for-wrapping-operation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;The-word-Stream-has-appeared-in-the-NC-code-from-FeatureCAM&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:0,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:[null,2,353217],&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:9,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-word-Stream-has-appeared-in-the-NC-code-from-FeatureCAM" target="_blank" rel="noopener"&gt;The-word-Stream-has-appeared-in-the-NC-code-from-FeatureCAM&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" style="width: 880px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="636" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;3D-milling-finish-operation-is-skipping-the-bottom-surface-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/3D-milling-finish-operation-is-skipping-the-bottom-surface-in-FeatureCAM" target="_blank" rel="noopener"&gt;3D-milling-finish-operation-is-skipping-the-bottom-surface-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-add-a-Fixture-Offset-in-a-FeatureCAM-Wire-EDM-document&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-add-a-Fixture-Offset-in-a-FeatureCAM-Wire-EDM-document" target="_blank" rel="noopener"&gt;How-to-add-a-Fixture-Offset-in-a-FeatureCAM-Wire-EDM-document&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error-TPD9999-Unknown-9999-with-turning-toolpath-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-TPD9999-Unknown-9999-with-turning-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error-TPD9999-Unknown-9999-with-turning-toolpath-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-the-setting-of-turning-2D-stock-into-3D-wireframe-stock-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-the-setting-of-turning-2D-stock-into-3D-wireframe-stock-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-change-the-setting-of-turning-2D-stock-into-3D-wireframe-stock-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Cutter-comp-code-is-missing-in-the-nc-program-although-it-was-turned-on-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cutter-comp-code-is-missing-in-the-nc-program-although-it-was-turned-on-in-FeatureCAM" target="_blank" rel="noopener"&gt;Cutter-comp-code-is-missing-in-the-nc-program-although-it-was-turned-on-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-set-a-bottom-finish-allowance-for-a-pocket-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-a-bottom-finish-allowance-for-a-pocket-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-set-a-bottom-finish-allowance-for-a-pocket-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-to-pick-the-points-while-creating-arc-and-while-checking-the-dimensions-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-pick-the-points-while-creating-arc-and-while-checking-the-dimensions-in-FeatureCAM" target="_blank" rel="noopener"&gt;Unable-to-pick-the-points-while-creating-arc-and-while-checking-the-dimensions-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Howto-reorder-text-curves-to-minimise-toolpath-links-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Howto-reorder-text-curves-to-minimise-toolpath-links-in-FeatureCAM" target="_blank" rel="noopener"&gt;Howto-reorder-text-curves-to-minimise-toolpath-links-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;October 2019&lt;/P&gt;
&lt;TABLE dir="ltr" style="width: 887px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="634" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 886px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Drill-is-facing-the-wrong-direction-and-wipes-out-the-part-when-doing-Machine-Simulation-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Drill-is-facing-the-wrong-direction-and-wipes-out-the-part-when-doing-Machine-Simulation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Drill-is-facing-the-wrong-direction-and-wipes-out-the-part-when-doing-Machine-Simulation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 886px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-to-select-Corner-Rounding-tool-for-Side-Feature-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-select-Corner-Rounding-tool-for-Side-Feature-in-FeatureCAM" target="_blank" rel="noopener"&gt;Unable-to-select-Corner-Rounding-tool-for-Side-Feature-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 886px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;3D-Simulation-has-lots-of-flats-in-FeatureCAM-Turnmill&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/3D-Simulation-has-lots-of-flats-in-FeatureCAM-Turnmill" target="_blank" rel="noopener"&gt;3D-Simulation-has-lots-of-flats-in-FeatureCAM-Turnmill&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 886px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Mill-Cylinder-toolpath-looks-choppy-in-simulation-but-is-correct-in-verification-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Mill-Cylinder-toolpath-looks-choppy-in-simulation-but-is-correct-in-verification-in-PartMaker" target="_blank" rel="noopener"&gt;Mill-Cylinder-toolpath-looks-choppy-in-simulation-but-is-correct-in-verification-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 886px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Recognising-features-from-odd-shaped-surfaces-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Recognising-features-from-odd-shaped-surfaces-in-FeatureCAM" target="_blank" rel="noopener"&gt;Recognising-features-from-odd-shaped-surfaces-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 886px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-slow-down-lead-in-feed-for-inside-outside-groove-finish-feature-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-slow-down-lead-in-feed-for-inside-outside-groove-finish-feature-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-slow-down-lead-in-feed-for-inside-outside-groove-finish-feature-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 886px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="743" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 884.8px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-deburr-a-crossdrilled-hole-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-deburr-a-crossdrilled-hole-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-deburr-a-crossdrilled-hole-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 884.8px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Impossible-to-open-FeatureCAM-after-a-language-change&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Impossible-to-open-FeatureCAM-after-a-language-change" target="_blank" rel="noopener"&gt;Impossible-to-open-FeatureCAM-after-a-language-change&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 884.8px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Different-tool-selection-between-FeatureCAM-2019-and-2020-version&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Different-tool-selection-between-FeatureCAM-2019-and-2020-version" target="_blank" rel="noopener"&gt;Different-tool-selection-between-FeatureCAM-2019-and-2020-version&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 884.8px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Rigid-tapping-cycle-is-spinning-in-the-wrong-direction-from-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Rigid-tapping-cycle-is-spinning-in-the-wrong-direction-from-FeatureCAM" target="_blank" rel="noopener"&gt;Rigid-tapping-cycle-is-spinning-in-the-wrong-direction-from-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 884.8px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Machining-attributes-are-not-saved-when-opening-a-new-FeatureCAM-document&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Machining-attributes-are-not-saved-when-opening-a-new-FeatureCAM-document" target="_blank" rel="noopener"&gt;Machining-attributes-are-not-saved-when-opening-a-new-FeatureCAM-document&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 884.8px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Geometry-is-being-drawn-in-the-wrong-place-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Geometry-is-being-drawn-in-the-wrong-place-in-FeatureCAM" target="_blank" rel="noopener"&gt;Geometry-is-being-drawn-in-the-wrong-place-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 884.8px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-deburr-a-3-axis-hole-using-a-lollipop-cutter-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-deburr-a-3-axis-hole-using-a-lollipop-cutter-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-deburr-a-3-axis-hole-using-a-lollipop-cutter-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 884.8px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Side-feature-does-not-finish-the-bottom-and-leaves-unmachined-areas-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Side-feature-does-not-finish-the-bottom-and-leaves-unmachined-areas-in-FeatureCAM" target="_blank" rel="noopener"&gt;Side-feature-does-not-finish-the-bottom-and-leaves-unmachined-areas-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 894px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="734" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 893px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Bore-finish-operation-gouges-the-front-of-the-part-when-using-small-clearance-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Bore-finish-operation-gouges-the-front-of-the-part-when-using-small-clearance-in-FeatureCAM" target="_blank" rel="noopener"&gt;Bore-finish-operation-gouges-the-front-of-the-part-when-using-small-clearance-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 893px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-Plunge-Broach-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-Plunge-Broach-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-Plunge-Broach-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="912" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Side-feature-starting-way-off-the-part-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Side-feature-starting-way-off-the-part-in-FeatureCAM" target="_blank" rel="noopener"&gt;Side-feature-starting-way-off-the-part-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-remove-retracts-from-PartMaker-Advanced-Milling-toolpath&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-remove-retracts-from-PartMaker-Advanced-Milling-toolpath" target="_blank" rel="noopener"&gt;How-to-remove-retracts-from-PartMaker-Advanced-Milling-toolpath&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Asking-for-login-ID-and-password-while-opening-FeatureCAM-PowerMill-PowerShape&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Asking-for-login-ID-and-password-while-opening-FeatureCAM-PowerMill-PowerShape" target="_blank" rel="noopener"&gt;Asking-for-login-ID-and-password-while-opening-FeatureCAM-PowerMill-PowerShape&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="939" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;3D-surface-milling-operations-are-missing-from-fm-file-from-another-users-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/3D-surface-milling-operations-are-missing-from-fm-file-from-another-users-FeatureCAM" target="_blank" rel="noopener"&gt;3D-surface-milling-operations-are-missing-from-fm-file-from-another-users-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Pocketing-a-thick-walled-tube-stock-produces-air-machining-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Pocketing-a-thick-walled-tube-stock-produces-air-machining-in-FeatureCAM" target="_blank" rel="noopener"&gt;Pocketing-a-thick-walled-tube-stock-produces-air-machining-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="954" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;All-tools-feeds-and-speeds-are-missing-from-the-Featurecam-tool-database-after-moving-it-to-a-new-location&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/All-tools-feeds-and-speeds-are-missing-from-the-Featurecam-tool-database-after-moving-it-to-a-new-location" target="_blank" rel="noopener"&gt;All-tools-feeds-and-speeds-are-missing-from-the-Featurecam-tool-database-after-moving-it-to-a-new-location&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-rounded-groove-feature-with-a-same-sized-ball-mill-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-rounded-groove-feature-with-a-same-sized-ball-mill-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-rounded-groove-feature-with-a-same-sized-ball-mill-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Rough-turn-toolpath-gouges-past-feature-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Rough-turn-toolpath-gouges-past-feature-in-FeatureCAM" target="_blank" rel="noopener"&gt;Rough-turn-toolpath-gouges-past-feature-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-back-turning-with-canned-cycle-using-back-turning-tool-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-back-turning-with-canned-cycle-using-back-turning-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-back-turning-with-canned-cycle-using-back-turning-tool-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;September 2019&lt;/P&gt;
&lt;TABLE dir="ltr" style="width: 888px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="833" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 887.2px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Material-gets-renamed-when-reopening-a-FeatureCAM-project&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Material-gets-renamed-when-reopening-a-FeatureCAM-project" target="_blank" rel="noopener"&gt;Material-gets-renamed-when-reopening-a-FeatureCAM-project&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 887.2px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Infinite-line-not-displayed-during-simulation-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Infinite-line-not-displayed-during-simulation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Infinite-line-not-displayed-during-simulation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 887.2px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-extract-a-curve-from-a-trimmed-surface-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-extract-a-curve-from-a-trimmed-surface-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-extract-a-curve-from-a-trimmed-surface-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 887.2px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Are-admin-rights-required-to-use-Add-ins-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Are-admin-rights-required-to-use-Add-ins-in-FeatureCAM" target="_blank" rel="noopener"&gt;Are-admin-rights-required-to-use-Add-ins-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 887.2px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Chamfer-machined-with-X-and-Y-motions-changes-for-Z-motions-without-any-reason-in-FetureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Chamfer-machined-with-X-and-Y-motions-changes-for-Z-motions-without-any-reason-in-FetureCAM" target="_blank" rel="noopener"&gt;Chamfer-machined-with-X-and-Y-motions-changes-for-Z-motions-without-any-reason-in-FetureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 887.2px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Toolpath-rapid-links-are-missing-while-simulating-centerline-simulation-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Toolpath-rapid-links-are-missing-while-simulating-centerline-simulation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Toolpath-rapid-links-are-missing-while-simulating-centerline-simulation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 887.2px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Inside-outside-groove-machines-wider-than-expected-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Inside-outside-groove-machines-wider-than-expected-in-FeatureCAM" target="_blank" rel="noopener"&gt;Inside-outside-groove-machines-wider-than-expected-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 887.2px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Turning-tool-retracts-through-the-component-on-the-sub-spindle-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Turning-tool-retracts-through-the-component-on-the-sub-spindle-in-FeatureCAM" target="_blank" rel="noopener"&gt;Turning-tool-retracts-through-the-component-on-the-sub-spindle-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="896" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Pin-number-for-post-processors-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Pin-number-for-post-processors-in-PartMaker" target="_blank" rel="noopener"&gt;Pin-number-for-post-processors-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-find-3-axis-Mill-and-2-axis-Turn-post-processors-shipped-with-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-find-3-axis-Mill-and-2-axis-Turn-post-processors-shipped-with-PartMaker" target="_blank" rel="noopener"&gt;How-to-find-3-axis-Mill-and-2-axis-Turn-post-processors-shipped-with-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="896" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Keyboard-shortcuts-gone-missing-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Keyboard-shortcuts-gone-missing-in-FeatureCAM" target="_blank" rel="noopener"&gt;Keyboard-shortcuts-gone-missing-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-drill-one-hole-then-index-the-chuck-to-next-position-on-a-Turn-MILL-machining-centre-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-drill-one-hole-then-index-the-chuck-to-next-position-on-a-Turn-MILL-machining-centre-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-drill-one-hole-then-index-the-chuck-to-next-position-on-a-Turn-MILL-machining-centre-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;B-axis-output-is-missing-when-stock-is-defined-as-a-cylinder-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/B-axis-output-is-missing-when-stock-is-defined-as-a-cylinder-in-FeatureCAM" target="_blank" rel="noopener"&gt;B-axis-output-is-missing-when-stock-is-defined-as-a-cylinder-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-setup-normal-to-a-surface&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-setup-normal-to-a-surface" target="_blank" rel="noopener"&gt;How-to-create-a-setup-normal-to-a-surface&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;VortexMilling-Calculator-Add-ins-giving-message-macro-run-time-error-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/VortexMilling-Calculator-Add-ins-giving-message-macro-run-time-error-in-FeatureCAM" target="_blank" rel="noopener"&gt;VortexMilling-Calculator-Add-ins-giving-message-macro-run-time-error-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Output-feedrate-is-too-slow-from-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Output-feedrate-is-too-slow-from-FeatureCAM" target="_blank" rel="noopener"&gt;Output-feedrate-is-too-slow-from-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Holes-are-displayed-faceted-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Holes-are-displayed-faceted-in-FeatureCAM" target="_blank" rel="noopener"&gt;Holes-are-displayed-faceted-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Circles-show-up-as-squares-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Circles-show-up-as-squares-in-FeatureCAM" target="_blank" rel="noopener"&gt;Circles-show-up-as-squares-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Create-a-toolpath-similar-to-a-PowerMill-pattern-toolpath-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Create-a-toolpath-similar-to-a-PowerMill-pattern-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;Create-a-toolpath-similar-to-a-PowerMill-pattern-toolpath-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;August 2019&lt;/P&gt;
&lt;TABLE dir="ltr" style="height: 104px; width: 872px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="617" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR style="height: 44px;"&gt;
&lt;TD style="height: 44px; width: 871px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-is-the-Through-Hole-checkbox-used-in-a-PartMaker-drilling-process&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-is-the-Through-Hole-checkbox-used-in-a-PartMaker-drilling-process" target="_blank" rel="noopener"&gt;How-is-the-Through-Hole-checkbox-used-in-a-PartMaker-drilling-process&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR style="height: 30px;"&gt;
&lt;TD style="height: 30px; width: 871px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;PartMaker-posting-out-different-Z-value-than-specified-in-toolpath&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PartMaker-posting-out-different-Z-value-than-specified-in-toolpath" target="_blank" rel="noopener"&gt;PartMaker-posting-out-different-Z-value-than-specified-in-toolpath&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR style="height: 30px;"&gt;
&lt;TD style="height: 30px; width: 871px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-generate-a-Setup-Sheet-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-generate-a-Setup-Sheet-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-generate-a-Setup-Sheet-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 871px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="644" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 870px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Feeds-and-speeds-are-too-high-in-NC-code-from-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Feeds-and-speeds-are-too-high-in-NC-code-from-FeatureCAM" target="_blank" rel="noopener"&gt;Feeds-and-speeds-are-too-high-in-NC-code-from-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 870px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-linearize-arcs-for-any-Feature-type-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-linearize-arcs-for-any-Feature-type-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-linearize-arcs-for-any-Feature-type-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 870px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Arc-errors-on-the-machine-tool-when-turning-radius-on-stepped-shaft-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Arc-errors-on-the-machine-tool-when-turning-radius-on-stepped-shaft-in-FeatureCAM" target="_blank" rel="noopener"&gt;Arc-errors-on-the-machine-tool-when-turning-radius-on-stepped-shaft-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 870px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-generate-a-Setup-Sheet-in-PartMaker&amp;quot;}"&gt;&amp;nbsp;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 870px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-four-axis-toolpath-using-Swarf-finish-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-four-axis-toolpath-using-Swarf-finish-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-four-axis-toolpath-using-Swarf-finish-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-do-a-material-pull-using-the-Sub-Spindle-in-Partmaker-Swiss&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:0,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:[null,2,353217],&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-do-a-material-pull-using-the-Sub-Spindle-in-Partmaker-Swiss" target="_blank" rel="noopener"&gt;How-to-do-a-material-pull-using-the-Sub-Spindle-in-Partmaker-Swiss&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;July 2019&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="868" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-cap-surface-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-cap-surface-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-cap-surface-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-avoid-retract-between-2-adjacent-surfaces-when-isoline-surface-milling-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-avoid-retract-between-2-adjacent-surfaces-when-isoline-surface-milling-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-avoid-retract-between-2-adjacent-surfaces-when-isoline-surface-milling-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;1603-code-installation-incomplete-Some-products-failed-to-install-when-installing-FeatureCAM-2020&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/1603-code-installation-incomplete-Some-products-failed-to-install-when-installing-FeatureCAM-2020" target="_blank" rel="noopener"&gt;1603-code-installation-incomplete-Some-products-failed-to-install-when-installing-FeatureCAM-2020&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-is-very-slow-with-every-single-click&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-is-very-slow-with-every-single-click" target="_blank" rel="noopener"&gt;FeatureCAM-is-very-slow-with-every-single-click&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Feedrate-that-is-set-with-override-in-FeatureCAM-is-different-in-posted-NC-code&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Feedrate-that-is-set-with-override-in-FeatureCAM-is-different-in-posted-NC-code" target="_blank" rel="noopener"&gt;Feedrate-that-is-set-with-override-in-FeatureCAM-is-different-in-posted-NC-code&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-outputting-N0-for-N-sequence-numbers&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-outputting-N0-for-N-sequence-numbers" target="_blank" rel="noopener"&gt;FeatureCAM-outputting-N0-for-N-sequence-numbers&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Wrapped-features-will-not-simulate-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Wrapped-features-will-not-simulate-in-FeatureCAM" target="_blank" rel="noopener"&gt;Wrapped-features-will-not-simulate-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Between-two-curves-toolpath-will-not-machine-below-cetreline-of-the-component-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Between-two-curves-toolpath-will-not-machine-below-cetreline-of-the-component-in-FeatureCAM" target="_blank" rel="noopener"&gt;Between-two-curves-toolpath-will-not-machine-below-cetreline-of-the-component-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-setup-a-5-axis-program-that-uses-a-Pivot-Point-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-setup-a-5-axis-program-that-uses-a-Pivot-Point-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-setup-a-5-axis-program-that-uses-a-Pivot-Point-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Network-license-fails-to-open-FeatureCAM-2020&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Network-license-fails-to-open-FeatureCAM-2020" target="_blank" rel="noopener"&gt;Network-license-fails-to-open-FeatureCAM-2020&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 882px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="639" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 881px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-set-Output-units-for-postprocessor-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-Output-units-for-postprocessor-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-set-Output-units-for-postprocessor-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 881px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Posted-output-will-not-run-on-the-machine-from-FeatureCAM-2020&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Posted-output-will-not-run-on-the-machine-from-FeatureCAM-2020" target="_blank" rel="noopener"&gt;Posted-output-will-not-run-on-the-machine-from-FeatureCAM-2020&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 881px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Multiple-fixture-document-with-a-single-datum-but-only-one-component-machined-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Multiple-fixture-document-with-a-single-datum-but-only-one-component-machined-in-FeatureCAM" target="_blank" rel="noopener"&gt;Multiple-fixture-document-with-a-single-datum-but-only-one-component-machined-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 881px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Geometry-maintains-associativity-after-clipping-segments-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Geometry-maintains-associativity-after-clipping-segments-in-FeatureCAM" target="_blank" rel="noopener"&gt;Geometry-maintains-associativity-after-clipping-segments-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 881px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-take-backup-of-customized-user-settings-for-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-take-backup-of-customized-user-settings-for-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-take-backup-of-customized-user-settings-for-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 881px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;No-geometry-shows-after-importing-a-DXF-file-into-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/No-geometry-shows-after-importing-a-DXF-file-into-FeatureCAM" target="_blank" rel="noopener"&gt;No-geometry-shows-after-importing-a-DXF-file-into-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 881px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-mill-a-groove-on-the-OD-of-a-cylinder-like-a-thread-using-4th-axis-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-mill-a-groove-on-the-OD-of-a-cylinder-like-a-thread-using-4th-axis-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-mill-a-groove-on-the-OD-of-a-cylinder-like-a-thread-using-4th-axis-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-tilt-a-turning-tool-on-the-B-Axis-in-FeatureCAM&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:0,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:[null,2,353217],&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-tilt-a-turning-tool-on-the-B-Axis-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-tilt-a-turning-tool-on-the-B-Axis-in-FeatureCAM&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" style="width: 880px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="641" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Minimise-tool-lifts-by-following-component-form-or-shape&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Minimise-tool-lifts-by-following-component-form-or-shape" target="_blank" rel="noopener"&gt;Minimise-tool-lifts-by-following-component-form-or-shape&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Copying-features-from-one-setup-to-another-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Copying-features-from-one-setup-to-another-in-FeatureCAM" target="_blank" rel="noopener"&gt;Copying-features-from-one-setup-to-another-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Wireframe-and-model-geometry-radii-appear-linearized-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Wireframe-and-model-geometry-radii-appear-linearized-in-FeatureCAM" target="_blank" rel="noopener"&gt;Wireframe-and-model-geometry-radii-appear-linearized-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;ID-Groove-tool-not-following-defined-toolpath-in-a-contouring-strategy-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/ID-Groove-tool-not-following-defined-toolpath-in-a-contouring-strategy-in-PartMaker" target="_blank" rel="noopener"&gt;ID-Groove-tool-not-following-defined-toolpath-in-a-contouring-strategy-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Where-are-the-installers-for-the-latest-versions-of-the-AMDEU-and-the-AMPPU-located&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Where-are-the-installers-for-the-latest-versions-of-the-AMDEU-and-the-AMPPU-located" target="_blank" rel="noopener"&gt;Where-are-the-installers-for-the-latest-versions-of-the-AMDEU-and-the-AMPPU-located&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-bring-back-missing-FeatureCAM-shortcut-icon-on-the-desktop&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-bring-back-missing-FeatureCAM-shortcut-icon-on-the-desktop" target="_blank" rel="noopener"&gt;How-to-bring-back-missing-FeatureCAM-shortcut-icon-on-the-desktop&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;3D-Simulation-results-very-poor-when-compared-to-centreline-simulation-in-FeatureCam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/3D-Simulation-results-very-poor-when-compared-to-centreline-simulation-in-FeatureCam" target="_blank" rel="noopener"&gt;3D-Simulation-results-very-poor-when-compared-to-centreline-simulation-in-FeatureCam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Toolpath-in-turn-window-gouging-the-part-when-roughing-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Toolpath-in-turn-window-gouging-the-part-when-roughing-in-PartMaker" target="_blank" rel="noopener"&gt;Toolpath-in-turn-window-gouging-the-part-when-roughing-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 875px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="759" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 873.6px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-wrapped-toolpath-that-uses-the-C-axis-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-wrapped-toolpath-that-uses-the-C-axis-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-create-a-wrapped-toolpath-that-uses-the-C-axis-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 873.6px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;illegible-engraving-when-wrapped-around-a-cylinder-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/illegible-engraving-when-wrapped-around-a-cylinder-in-FeatureCAM" target="_blank" rel="noopener"&gt;illegible-engraving-when-wrapped-around-a-cylinder-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 873.6px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Remachining-failing-to-detect-remaining-material-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Remachining-failing-to-detect-remaining-material-in-FeatureCAM" target="_blank" rel="noopener"&gt;Remachining-failing-to-detect-remaining-material-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 873.6px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-add-toolpath-points-to-a-PartMaker-Advanced-Contour-Mill-operation&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-add-toolpath-points-to-a-PartMaker-Advanced-Contour-Mill-operation" target="_blank" rel="noopener"&gt;How-to-add-toolpath-points-to-a-PartMaker-Advanced-Contour-Mill-operation&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 901px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="685" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 900px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-adjust-column-widths-in-the-operation-list-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-adjust-column-widths-in-the-operation-list-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-adjust-column-widths-in-the-operation-list-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 900px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-modify-the-4th-axis-Feed-limit-in-Featurecam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-modify-the-4th-axis-Feed-limit-in-Featurecam" target="_blank" rel="noopener"&gt;How-to-modify-the-4th-axis-Feed-limit-in-Featurecam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 900px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Custom-tabs-are-missing-from-the-ribbon-since-upgrade-to-FeatureCam-2020&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Custom-tabs-are-missing-from-the-ribbon-since-upgrade-to-FeatureCam-2020" target="_blank" rel="noopener"&gt;Custom-tabs-are-missing-from-the-ribbon-since-upgrade-to-FeatureCam-2020&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 900px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;No-toolpath-when-simulating-a-face-groove-feature-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/No-toolpath-when-simulating-a-face-groove-feature-in-FeatureCAM" target="_blank" rel="noopener"&gt;No-toolpath-when-simulating-a-face-groove-feature-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 900px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;No-X-or-Z-values-in-NC-output-from-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/No-X-or-Z-values-in-NC-output-from-FeatureCAM" target="_blank" rel="noopener"&gt;No-X-or-Z-values-in-NC-output-from-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 900px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Manufacturing-Data-Exchange-Utility-Premium-2020-does-not-use-PowerShape-Standard-2020-single-user-license&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Manufacturing-Data-Exchange-Utility-Premium-2020-does-not-use-PowerShape-Standard-2020-single-user-license" target="_blank" rel="noopener"&gt;Manufacturing-Data-Exchange-Utility-Premium-2020-does-not-use-PowerShape-Standard-2020-single-user-license&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;June 2019&lt;/P&gt;
&lt;TABLE dir="ltr" style="width: 893px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="758" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 892px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-axial-stepdown-from-a-rapid-to-a-feed-on-a-Contour-Mill-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-axial-stepdown-from-a-rapid-to-a-feed-on-a-Contour-Mill-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-change-axial-stepdown-from-a-rapid-to-a-feed-on-a-Contour-Mill-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 892px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-save-a-new-tool-change-location-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-save-a-new-tool-change-location-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-save-a-new-tool-change-location-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 892px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-reduce-the-load-on-a-smaller-tool-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-reduce-the-load-on-a-smaller-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-reduce-the-load-on-a-smaller-tool-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 892px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Too-many-files-are-being-saved-when-saving-NC-code-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Too-many-files-are-being-saved-when-saving-NC-code-in-FeatureCAM" target="_blank" rel="noopener"&gt;Too-many-files-are-being-saved-when-saving-NC-code-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 892px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-to-create-wrapped-toolpaths-The-following-features-are-incorrectly-positioned-when-running-a-toolpath-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-create-wrapped-toolpaths-The-following-features-are-incorrectly-positioned-when-running-a-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;Unable-to-create-wrapped-toolpaths-The-following-features-are-incorrectly-positioned-when-running-a-toolpath-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 893px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="809" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 892px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;B-axis-going-to-the-wrong-side-of-sub-spindle-in-PartMaker-Full-Machine-Simulation&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/B-axis-going-to-the-wrong-side-of-sub-spindle-in-PartMaker-Full-Machine-Simulation" target="_blank" rel="noopener"&gt;B-axis-going-to-the-wrong-side-of-sub-spindle-in-PartMaker-Full-Machine-Simulation&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 892px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Tool-is-not-using-rapid-movements-to-step-over-in-side-feature-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Tool-is-not-using-rapid-movements-to-step-over-in-side-feature-in-FeatureCAM" target="_blank" rel="noopener"&gt;Tool-is-not-using-rapid-movements-to-step-over-in-side-feature-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-plunge-milling-toolpath-that-follows-a-curve-in-FeatureCAM&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:0,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:353217},&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-plunge-milling-toolpath-that-follows-a-curve-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-plunge-milling-toolpath-that-follows-a-curve-in-FeatureCAM&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-plunge-milling-toolpath-that-follows-a-curve-in-FeatureCAM&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:0,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:353217},&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-recognise-features-around-the-index-axis-using-Interactive-Feature-Recognition-in-FeatureCAMs-TurnMILL" target="_blank" rel="noopener"&gt;How-to-recognise-features-around-the-index-axis-using-Interactive-Feature-Recognition-in-FeatureCAMs-TurnMILL&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Oversized-parts-not-nested-on-the-assigned-sheet-in-CAMduct&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:0,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:[null,2,353217],&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Oversized-parts-not-nested-on-the-assigned-sheet-in-CAMduct" target="_blank" rel="noopener"&gt;Oversized-parts-not-nested-on-the-assigned-sheet-in-CAMduct&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Oversized-parts-not-nested-on-the-assigned-sheet-in-CAMduct&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:0,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:[null,2,353217],&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Is-there-a-Tolerance-setting-for-the-Mill-Cylinder-Face-Window-in-PartMaker" target="_blank" rel="noopener"&gt;Is-there-a-Tolerance-setting-for-the-Mill-Cylinder-Face-Window-in-PartMaker&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="910" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Is-FeatureCAM-able-to-support-a-trunnion-or-indexer-with-two-rotary-axis-on-top-of-one-tilting-axis&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Is-FeatureCAM-able-to-support-a-trunnion-or-indexer-with-two-rotary-axis-on-top-of-one-tilting-axis" target="_blank" rel="noopener"&gt;Is-FeatureCAM-able-to-support-a-trunnion-or-indexer-with-two-rotary-axis-on-top-of-one-tilting-axis&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-4th-axis-setup-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-4th-axis-setup-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-4th-axis-setup-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-add-cutter-comp-to-a-turning-tool-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-add-cutter-comp-to-a-turning-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-add-cutter-comp-to-a-turning-tool-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;4-axis-3D-Simulation-does-not-rotate-as-expected-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/4-axis-3D-Simulation-does-not-rotate-as-expected-in-FeatureCAM" target="_blank" rel="noopener"&gt;4-axis-3D-Simulation-does-not-rotate-as-expected-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Wrong-units-are-shown-when-a-DXF-file-is-imported-into-PowerMill&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Wrong-units-are-shown-when-a-DXF-file-is-imported-into-PowerMill" target="_blank" rel="noopener"&gt;Wrong-units-are-shown-when-a-DXF-file-is-imported-into-PowerMill&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;May 2019&lt;/P&gt;
&lt;TABLE dir="ltr" style="width: 771px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="658" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;4th-axis-surface-milled-part-cutting-fresh-air-on-second-setup&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/4th-axis-surface-milled-part-cutting-fresh-air-on-second-setup" target="_blank" rel="noopener"&gt;4th-axis-surface-milled-part-cutting-fresh-air-on-second-setup&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error-The-block-is-either-not-defined-or-it-has-inappropriate-values-when-3D-milling-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-The-block-is-either-not-defined-or-it-has-inappropriate-values-when-3D-milling-in-PartMaker" target="_blank" rel="noopener"&gt;Error-The-block-is-either-not-defined-or-it-has-inappropriate-values-when-3D-milling-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;System-requirements-for-Autodesk-FeatureCAM-2020&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/System-requirements-for-Autodesk-FeatureCAM-2020" target="_blank" rel="noopener"&gt;System-requirements-for-Autodesk-FeatureCAM-2020&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Tool-library-not-accessible-after-connecting-to-MS-Access-Database-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Tool-library-not-accessible-after-connecting-to-MS-Access-Database-in-FeatureCAM" target="_blank" rel="noopener"&gt;Tool-library-not-accessible-after-connecting-to-MS-Access-Database-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;PartMaker-is-not-posting-program-end-codes-when-Sub-Spindle-process-is-selected&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PartMaker-is-not-posting-program-end-codes-when-Sub-Spindle-process-is-selected" target="_blank" rel="noopener"&gt;PartMaker-is-not-posting-program-end-codes-when-Sub-Spindle-process-is-selected&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Can-t-unwrap-curve-around-index-axis-properly-to-create-wrapped-groove-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-t-unwrap-curve-around-index-axis-properly-to-create-wrapped-groove-in-FeatureCAM" target="_blank" rel="noopener"&gt;Can-t-unwrap-curve-around-index-axis-properly-to-create-wrapped-groove-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Feature-recognition-creates-the-chamfer-in-the-wrong-position-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Feature-recognition-creates-the-chamfer-in-the-wrong-position-in-FeatureCAM" target="_blank" rel="noopener"&gt;Feature-recognition-creates-the-chamfer-in-the-wrong-position-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Surface-mill-feature-fails-to-be-added-to-a-part-library-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Surface-mill-feature-fails-to-be-added-to-a-part-library-in-FeatureCAM" target="_blank" rel="noopener"&gt;Surface-mill-feature-fails-to-be-added-to-a-part-library-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Can-the-facing-operation-be-an-irregular-shape-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-the-facing-operation-be-an-irregular-shape-in-FeatureCAM" target="_blank" rel="noopener"&gt;Can-the-facing-operation-be-an-irregular-shape-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Selecting-right-hand-thread-in-FeatureCAM-is-not-changing-M3-M4-in-NC-code&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Selecting-right-hand-thread-in-FeatureCAM-is-not-changing-M3-M4-in-NC-code" target="_blank" rel="noopener"&gt;Selecting-right-hand-thread-in-FeatureCAM-is-not-changing-M3-M4-in-NC-code&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Stick-tools-are-not-retracting-in-Z-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Stick-tools-are-not-retracting-in-Z-in-PartMaker" target="_blank" rel="noopener"&gt;Stick-tools-are-not-retracting-in-Z-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Side-Feature-with-multiple-curves-is-not-lifting-in-Z-when-moving-from-one-curve-to-the-other&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Side-Feature-with-multiple-curves-is-not-lifting-in-Z-when-moving-from-one-curve-to-the-other" target="_blank" rel="noopener"&gt;Side-Feature-with-multiple-curves-is-not-lifting-in-Z-when-moving-from-one-curve-to-the-other&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-the-angle-of-a-face-milling-toolpath-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-the-angle-of-a-face-milling-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-change-the-angle-of-a-face-milling-toolpath-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 775px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="688" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 773.333px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Geometry-not-rendering-correctly-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Geometry-not-rendering-correctly-in-FeatureCAM" target="_blank" rel="noopener"&gt;Geometry-not-rendering-correctly-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 773.333px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Directed-Automatic-Feature-Recognition-selecting-holes-smaller-than-required-size-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Directed-Automatic-Feature-Recognition-selecting-holes-smaller-than-required-size-in-FeatureCAM" target="_blank" rel="noopener"&gt;Directed-Automatic-Feature-Recognition-selecting-holes-smaller-than-required-size-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 773.333px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Side-groove-operation-with-multiple-radial-passes-lifts-in-Z-between-passes&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Side-groove-operation-with-multiple-radial-passes-lifts-in-Z-between-passes" target="_blank" rel="noopener"&gt;Side-groove-operation-with-multiple-radial-passes-lifts-in-Z-between-passes&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 773.333px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Should-Global-Coordinates-or-Local-Coordinates-be-used-for-B-axis-output-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Should-Global-Coordinates-or-Local-Coordinates-be-used-for-B-axis-output-in-PartMaker" target="_blank" rel="noopener"&gt;Should-Global-Coordinates-or-Local-Coordinates-be-used-for-B-axis-output-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 773.333px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Are-updated-PartMaker-Material-Databases-available-for-download&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Are-updated-PartMaker-Material-Databases-available-for-download" target="_blank" rel="noopener"&gt;Are-updated-PartMaker-Material-Databases-available-for-download&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 773.333px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-Fixed-Angle-milling-operation-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-Fixed-Angle-milling-operation-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-create-a-Fixed-Angle-milling-operation-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 767px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="641" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Simulation-does-not-show-wire-compensation-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Simulation-does-not-show-wire-compensation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Simulation-does-not-show-wire-compensation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Feature-properties-window-not-showing-on-screen-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Feature-properties-window-not-showing-on-screen-in-FeatureCAM" target="_blank" rel="noopener"&gt;Feature-properties-window-not-showing-on-screen-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error-Problem-Running-Simulation-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Problem-Running-Simulation-in-PartMaker" target="_blank" rel="noopener"&gt;Error-Problem-Running-Simulation-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-post-code-for-a-group-of-setups-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-post-code-for-a-group-of-setups-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-post-code-for-a-group-of-setups-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Can-a-list-of-all-tools-in-the-tools-file-be-output-into-a-PartMaker-setup-sheet&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-a-list-of-all-tools-in-the-tools-file-be-output-into-a-PartMaker-setup-sheet" target="_blank" rel="noopener"&gt;Can-a-list-of-all-tools-in-the-tools-file-be-output-into-a-PartMaker-setup-sheet&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-new-setup-using-a-shortcut-key-when-the-FeatureCAM-ribbon-is-closed&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-new-setup-using-a-shortcut-key-when-the-FeatureCAM-ribbon-is-closed" target="_blank" rel="noopener"&gt;How-to-create-a-new-setup-using-a-shortcut-key-when-the-FeatureCAM-ribbon-is-closed&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-rough-mill-in-PartMaker-in-multiple-radial-passes-without-air-cutting&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-rough-mill-in-PartMaker-in-multiple-radial-passes-without-air-cutting" target="_blank" rel="noopener"&gt;How-to-rough-mill-in-PartMaker-in-multiple-radial-passes-without-air-cutting&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Toolpath-retract-moves-overtraveling-machine&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Toolpath-retract-moves-overtraveling-machine" target="_blank" rel="noopener"&gt;Toolpath-retract-moves-overtraveling-machine&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Can-a-User-Defined-tool-be-made-from-a-solid-model-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-a-User-Defined-tool-be-made-from-a-solid-model-in-PartMaker" target="_blank" rel="noopener"&gt;Can-a-User-Defined-tool-be-made-from-a-solid-model-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 762px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="640" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 760px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Side-feature-from-curve-causing-arc-errors-in-NC-code-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Side-feature-from-curve-causing-arc-errors-in-NC-code-in-FeatureCAM" target="_blank" rel="noopener"&gt;Side-feature-from-curve-causing-arc-errors-in-NC-code-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 760px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Sub-Spindle-tools-do-not-touch-part-when-simulating-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Sub-Spindle-tools-do-not-touch-part-when-simulating-in-PartMaker" target="_blank" rel="noopener"&gt;Sub-Spindle-tools-do-not-touch-part-when-simulating-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 760px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Offset-curve-not-maintaining-smoothness-between-points-in-PowerSHAPE&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Offset-curve-not-maintaining-smoothness-between-points-in-PowerSHAPE" target="_blank" rel="noopener"&gt;Offset-curve-not-maintaining-smoothness-between-points-in-PowerSHAPE&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 760px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-the-plunge-feed-on-Thread-Milling-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-the-plunge-feed-on-Thread-Milling-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-change-the-plunge-feed-on-Thread-Milling-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="762" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Create-a-tapered-thread-using-G76-cycle-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Create-a-tapered-thread-using-G76-cycle-in-FeatureCAM" target="_blank" rel="noopener"&gt;Create-a-tapered-thread-using-G76-cycle-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-minimise-the-machining-area-when-profiling-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-minimise-the-machining-area-when-profiling-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-minimise-the-machining-area-when-profiling-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-copy-default-setting-from-one-PC-to-another-PC-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-copy-default-setting-from-one-PC-to-another-PC-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-copy-default-setting-from-one-PC-to-another-PC-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Create-serrations-around-a-turned-part-using-a-form-tool-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Create-serrations-around-a-turned-part-using-a-form-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;Create-serrations-around-a-turned-part-using-a-form-tool-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Part-compare-is-showing-false-excess-material-results-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Part-compare-is-showing-false-excess-material-results-in-FeatureCAM" target="_blank" rel="noopener"&gt;Part-compare-is-showing-false-excess-material-results-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-multiple-depth-cuts-with-PartMaker-Surfacing-toolpaths&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-multiple-depth-cuts-with-PartMaker-Surfacing-toolpaths" target="_blank" rel="noopener"&gt;How-to-create-multiple-depth-cuts-with-PartMaker-Surfacing-toolpaths&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-outputting-code-that-says-Linear-Circular-and-Rapid-throughout-the-program&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-outputting-code-that-says-Linear-Circular-and-Rapid-throughout-the-program" target="_blank" rel="noopener"&gt;FeatureCAM-outputting-code-that-says-Linear-Circular-and-Rapid-throughout-the-program&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Machine-over-travel-in-Z-in-FeatureCAM-5-axis-toolpath&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Machine-over-travel-in-Z-in-FeatureCAM-5-axis-toolpath" target="_blank" rel="noopener"&gt;Machine-over-travel-in-Z-in-FeatureCAM-5-axis-toolpath&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-do-I-machine-the-top-of-a-plate-in-PowerMILL&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-do-I-machine-the-top-of-a-plate-in-PowerMILL" target="_blank" rel="noopener"&gt;How-do-I-machine-the-top-of-a-plate-in-PowerMILL&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-to-install-updated-software-version-for-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-install-updated-software-version-for-FeatureCAM" target="_blank" rel="noopener"&gt;Unable-to-install-updated-software-version-for-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error-Error-loading-post-processor-file-when-selecting-a-post-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Error-loading-post-processor-file-when-selecting-a-post-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error-Error-loading-post-processor-file-when-selecting-a-post-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;April 2019&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="822" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-revert-from-the-ribbon-UI-to-the-toolbar-UI-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-revert-from-the-ribbon-UI-to-the-toolbar-UI-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-revert-from-the-ribbon-UI-to-the-toolbar-UI-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-fix-4K-resolution-display-issue-for-PowerMill-PowerShape-PowerInspect-and-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-fix-4K-resolution-display-issue-for-PowerMill-PowerShape-PowerInspect-and-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-fix-4K-resolution-display-issue-for-PowerMill-PowerShape-PowerInspect-and-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-switch-between-G76-G92-and-G32-threading-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-switch-between-G76-G92-and-G32-threading-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-switch-between-G76-G92-and-G32-threading-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;No-material-sticking-out-of-Main-Spindle-in-PartMaker-TurnMill-Simulation&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/No-material-sticking-out-of-Main-Spindle-in-PartMaker-TurnMill-Simulation" target="_blank" rel="noopener"&gt;No-material-sticking-out-of-Main-Spindle-in-PartMaker-TurnMill-Simulation&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error-TDP01-Unkown-1-with-a-groove-operation-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-TDP01-Unkown-1-with-a-groove-operation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error-TDP01-Unkown-1-with-a-groove-operation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error-Cannot-load-the-tools-and-materials-database-in-directory-in-FeatureCAM-when-opening-an-old-program&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Cannot-load-the-tools-and-materials-database-in-directory-in-FeatureCAM-when-opening-an-old-program" target="_blank" rel="noopener"&gt;Error-Cannot-load-the-tools-and-materials-database-in-directory-in-FeatureCAM-when-opening-an-old-program&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="771" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;The-location-of-the-text-curve-changes-when-accessing-its-properties-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-location-of-the-text-curve-changes-when-accessing-its-properties-in-FeatureCAM" target="_blank" rel="noopener"&gt;The-location-of-the-text-curve-changes-when-accessing-its-properties-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-improve-quality-of-STL-export-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-improve-quality-of-STL-export-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-improve-quality-of-STL-export-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Cannot-find-Resaveallfiles-bas-file-in-FeatureCAM-2019-addins&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cannot-find-Resaveallfiles-bas-file-in-FeatureCAM-2019-addins" target="_blank" rel="noopener"&gt;Cannot-find-Resaveallfiles-bas-file-in-FeatureCAM-2019-addins&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-machine-spiral-flutes-with-a-4-axis-toolpath-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-machine-spiral-flutes-with-a-4-axis-toolpath-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-machine-spiral-flutes-with-a-4-axis-toolpath-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-Outputting-Canned-Cycles-for-Patterned-Hole-Features&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-Outputting-Canned-Cycles-for-Patterned-Hole-Features" target="_blank" rel="noopener"&gt;FeatureCAM-Outputting-Canned-Cycles-for-Patterned-Hole-Features&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-set-up-a-workgroup-machining-configuration-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-up-a-workgroup-machining-configuration-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-set-up-a-workgroup-machining-configuration-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Machine-text-looks-odd-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Machine-text-looks-odd-in-FeatureCAM" target="_blank" rel="noopener"&gt;Machine-text-looks-odd-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Use-simulation-as-starting-point-greyed-out-in-FeatureCAM2019&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Use-simulation-as-starting-point-greyed-out-in-FeatureCAM2019" target="_blank" rel="noopener"&gt;Use-simulation-as-starting-point-greyed-out-in-FeatureCAM2019&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-set-Index-Axis-Limit-in-a-5-axis-project-in-FeatureCAM&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:0,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:353217},&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-Index-Axis-Limit-in-a-5-axis-project-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-set-Index-Axis-Limit-in-a-5-axis-project-in-FeatureCAM&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="759" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Item-Hole-appears-in-incorrect-position-in-CAMduct&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Item-Hole-appears-in-incorrect-position-in-CAMduct" target="_blank" rel="noopener"&gt;Item-Hole-appears-in-incorrect-position-in-CAMduct&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-drilling-toolpath-with-IFR-hole-recognition-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-drilling-toolpath-with-IFR-hole-recognition-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-drilling-toolpath-with-IFR-hole-recognition-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Simulation-is-slow-and-lagging-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Simulation-is-slow-and-lagging-in-PartMaker" target="_blank" rel="noopener"&gt;Simulation-is-slow-and-lagging-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-pull-stock-in-a-turning-project-using-sub-spindle-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-pull-stock-in-a-turning-project-using-sub-spindle-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-pull-stock-in-a-turning-project-using-sub-spindle-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;location-of-tool-and-material-databases-in-featurecam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/location-of-tool-and-material-databases-in-featurecam" target="_blank" rel="noopener"&gt;location-of-tool-and-material-databases-in-featurecam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Using-a-setup-to-establish-your-touch-off-point-for-5-axis-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Using-a-setup-to-establish-your-touch-off-point-for-5-axis-in-FeatureCAM" target="_blank" rel="noopener"&gt;Using-a-setup-to-establish-your-touch-off-point-for-5-axis-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-the-orentation-angle-of-a-lathe-tool-insert-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-the-orentation-angle-of-a-lathe-tool-insert-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-change-the-orentation-angle-of-a-lathe-tool-insert-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Can-PartMaker-Normal-To-Faceplane-be-changed-to-make-X-face-up-instead-of-to-the-right&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-PartMaker-Normal-To-Faceplane-be-changed-to-make-X-face-up-instead-of-to-the-right" target="_blank" rel="noopener"&gt;Can-PartMaker-Normal-To-Faceplane-be-changed-to-make-X-face-up-instead-of-to-the-right&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;March 2019&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="733" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-custom-form-tool-from-curve-is-not-coming-out-the-correct-diameter&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-custom-form-tool-from-curve-is-not-coming-out-the-correct-diameter" target="_blank" rel="noopener"&gt;FeatureCAM-custom-form-tool-from-curve-is-not-coming-out-the-correct-diameter&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Cannot-run-PartMaker-2018-and-FeatureCAM-2019-on-a-single-borrowed-license&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cannot-run-PartMaker-2018-and-FeatureCAM-2019-on-a-single-borrowed-license" target="_blank" rel="noopener"&gt;Cannot-run-PartMaker-2018-and-FeatureCAM-2019-on-a-single-borrowed-license&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;PartMaker-Mill-Cylinder-toolpath-produces-results-that-do-not-match-the-model&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PartMaker-Mill-Cylinder-toolpath-produces-results-that-do-not-match-the-model" target="_blank" rel="noopener"&gt;PartMaker-Mill-Cylinder-toolpath-produces-results-that-do-not-match-the-model&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Side-feature-not-ramping-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Side-feature-not-ramping-in-FeatureCAM" target="_blank" rel="noopener"&gt;Side-feature-not-ramping-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-only-detecting-holes-along-Z-axis-on-model&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-only-detecting-holes-along-Z-axis-on-model" target="_blank" rel="noopener"&gt;FeatureCAM-only-detecting-holes-along-Z-axis-on-model&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Sub-spindle-milling-X-coordinates-posting-with-an-incorrect-sign-in-PartMaker&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:276608,&amp;quot;10&amp;quot;:2,&amp;quot;14&amp;quot;:{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:353217},&amp;quot;15&amp;quot;:&amp;quot;Calibri&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Sub-spindle-milling-X-coordinates-posting-with-an-incorrect-sign-in-PartMaker" target="_blank" rel="noopener"&gt;Sub-spindle-milling-X-coordinates-posting-with-an-incorrect-sign-in-PartMaker&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;February 2019&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="739" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;When synchronizing operations for a multi-turret machine, some sync points are not working in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/When-synchronizing-operations-for-a-multi-turret-machine-some-sync-points-are-not-working-in-FeatureCAM" target="_blank" rel="noopener"&gt;When synchronizing operations for a multi-turret machine, some sync points are not working in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Only one setup simulates when simulating a part with multiple setups in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Only-one-setup-simulates-when-simulating-a-part-with-multiple-setups-in-FeatureCAM" target="_blank" rel="noopener"&gt;Only one setup simulates when simulating a part with multiple setups in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;AFR is creating side features instead of hole features in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/AFR-is-creating-side-features-instead-of-hole-features-in-FeatureCAM" target="_blank" rel="noopener"&gt;AFR is creating side features instead of hole features in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to mill a hexagon by using the end of a cutter in FeatureCAM turn/mill&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-Hexagon-by-using-end-of-the-cutter-in-FeatureCAM-turn-mill" target="_blank" rel="noopener"&gt;How to mill a hexagon by using the end of a cutter in FeatureCAM turn/mill&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable to close FeatureCAM 2018&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-close-FeatureCAM-2018" target="_blank" rel="noopener"&gt;Unable to close FeatureCAM 2018&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;ID boring operation not posting rapid moves in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/ID-boring-operation-not-posting-rapid-moves-in-PartMaker" target="_blank" rel="noopener"&gt;ID boring operation not posting rapid moves in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Not seeing a G50 shift for tools in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Not-seeing-a-G50-shift-for-tools-in-PartMaker" target="_blank" rel="noopener"&gt;Not seeing a G50 shift for tools in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Cutoff tool does not change when selecting Left or Right Handed when viewing in simulation&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cutoff-tool-does-not-change-when-selecting-Left-or-Right-Handed-when-viewing-in-simulation" target="_blank" rel="noopener"&gt;Cutoff tool does not change when selecting Left or Right Handed when viewing in simulation&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Isoline operation disappears when selecting lead and lean in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Isoline-operation-disappears-when-selecting-lead-and-lean-in-FeatureCAM" target="_blank" rel="noopener"&gt;Isoline operation disappears when selecting lead and lean in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Warning: \&amp;quot;The selected machine design file does not exist and a smart choice has been made\&amp;quot; when generating an NC toolpath in FeatureCAM Standard&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Warning-The-selected-machine-design-file-does-not-exist-and-a-smart-choice-has-been-made-when-generating-an-NC-toolpath-in-FeatureCAM-Standard" target="_blank" rel="noopener"&gt;Warning: "The selected machine design file does not exist and a smart choice has been made" when generating an NC toolpath in FeatureCAM Standard&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="791" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Pick out the radius that is left in the corner when surface milling in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-Pick-out-the-radius-in-corner-of-pockets-when-surface-milling" target="_blank" rel="noopener"&gt;Pick out the radius that is left in the corner when surface milling in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;NC program files are saved using the base file name, but setup numbers (-2, -3, etc.) are not included in the file name in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/NC-program-files-are-saved-using-the-base-file-name-but-setup-numbers-2-3-etc-are-not-included-in-the-file-name-in-FeatureCAM" target="_blank" rel="noopener"&gt;NC program files are saved using the base file name, but setup numbers (-2, -3, etc.) are not included in the file name in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Can cycles used on the Gang Slide be used on the Backworking or Endworking tool posts in PartMaker?&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-cycles-used-on-the-Gang-Slide-be-used-on-the-Backworking-or-Endworking-tool-posts-in-PartMaker" target="_blank" rel="noopener"&gt;Can cycles used on the Gang Slide be used on the Backworking or Endworking tool posts in PartMaker?&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Live tooling spindle rotating the wrong way in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Live-tooling-spindle-rotating-the-wrong-way-in-FeatureCAM" target="_blank" rel="noopener"&gt;Live tooling spindle rotating the wrong way in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable to select a form tool in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-select-a-form-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;Unable to select a form tool in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Long save times in FeatureCam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Long-save-times-in-FeatureCam" target="_blank" rel="noopener"&gt;Long save times in FeatureCam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Tool retracting too high when surface milling in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Tool-retracting-too-high-when-surface-milling-in-FeatureCAM" target="_blank" rel="noopener"&gt;Tool retracting too high when surface milling in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-simultaneous-external-turning-and-drilling-toolpath-in-PartMaker&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:3,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:[null,2,353217],&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-simultaneous-external-turning-and-drilling-toolpath-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-create-a-simultaneous-external-turning-and-drilling-toolpath-in-PartMaker&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="807" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-wire-holes-on-a-swiss-machine-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-wire-holes-on-a-swiss-machine-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-create-wire-holes-on-a-swiss-machine-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-recognise-4-axis-hole-features-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-recognise-4-axis-hole-features-in-FeatureCAM" target="_blank" rel="noopener"&gt;Unable-recognise-4-axis-hole-features-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-drill-a-hole-with-the-largest-available-diameter-drill-and-mill-the-remaining-diameter-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-drill-a-hole-with-the-largest-available-diameter-drill-and-mill-the-remaining-diameter-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-drill-a-hole-with-the-largest-available-diameter-drill-and-mill-the-remaining-diameter-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-X-retract-moves-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-X-retract-moves-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-change-X-retract-moves-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Cannot-import-Inventor-assembly-files-from-the-Vault-into-FeatureCAM&amp;quot;}"&gt;
&lt;P&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cannot-import-Inventor-assembly-files-from-the-Vault-into-FeatureCAM" target="_blank" rel="noopener"&gt;Cannot-import-Inventor-assembly-files-from-the-Vault-into-FeatureCAM&lt;/A&gt;&lt;/P&gt;
&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;January 2019&lt;/P&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;PartMaker-will-not-allow-selection-of-off-center-Hole-for-drilling-operation&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:3,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:353217},&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PartMaker-will-not-allow-selection-of-off-center-Hole-for-drilling-operation" target="_blank" rel="noopener"&gt;PartMaker-will-not-allow-selection-of-off-center-Hole-for-drilling-operation&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="807" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Patterned-holes-reversing-direction-on-the-subspindle-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Patterned-holes-reversing-direction-on-the-subspindle-in-FeatureCAM" target="_blank" rel="noopener"&gt;Patterned-holes-reversing-direction-on-the-subspindle-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Macro-not-working-after-installing-newest-version-of-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Macro-not-working-after-installing-newest-version-of-FeatureCAM" target="_blank" rel="noopener"&gt;Macro-not-working-after-installing-newest-version-of-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-turning-tool-holder-from-a-solid-model-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-turning-tool-holder-from-a-solid-model-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-turning-tool-holder-from-a-solid-model-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-start-a-counterbore-in-the-center-of-a-hole-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-start-a-counterbore-in-the-center-of-a-hole-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-start-a-counterbore-in-the-center-of-a-hole-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Not seeing specific machine in list of machines when using PartMaker Multi-Channel Editor&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:276609,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;14&amp;quot;:{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:353217},&amp;quot;15&amp;quot;:&amp;quot;Calibri&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Not-seeing-specific-machine-in-list-of-machines-when-using-PartMaker-Multi-Channel-Editor" target="_blank" rel="noopener"&gt;Not seeing specific machine in list of machines when using PartMaker Multi-Channel Editor&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="676" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to set the path in the open document to the folder location last visited in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-the-path-in-the-open-document-to-the-folder-location-last-visited-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to set the path in the open document to the folder location last visited in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to reduce the size of a part in FeatureCAM turning&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-reduce-the-size-of-a-part-in-FeatureCAM-turning" target="_blank" rel="noopener"&gt;How to reduce the size of a part in FeatureCAM turning&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Impossible to set stepdown value in semifinish operation in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Impossible-to-set-stepdown-value-in-semifinish-operation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Impossible to set stepdown value in semifinish operation in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Custom lollipop cutter not cutting the bottom of the undercut surface in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Custom-lollipop-cutter-not-cutting-the-bottom-of-the-undercut-surface-in-FeatureCAM" target="_blank" rel="noopener"&gt;Custom lollipop cutter not cutting the bottom of the undercut surface in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Specific character not being machined when simulating engraving in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Specific-character-not-being-machined-when-simulating-engraving-in-PartMaker" target="_blank" rel="noopener"&gt;Specific character not being machined when simulating engraving in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to machine a diamond or hex shape in PartMaker with an X-oriented endmill&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-machine-a-diamond-or-hex-shape-in-PartMaker-with-an-X-oriented-endmill" target="_blank" rel="noopener"&gt;How to machine a diamond or hex shape in PartMaker with an X-oriented endmill&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;3D Simulation shows a gouge for a Turning toolpath in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/3D-Simulation-shows-a-gouge-for-a-Turning-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;3D Simulation shows a gouge for a Turning toolpath in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable to generate required helical passes in thread mill feature in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-generate-required-helical-passes-in-thread-mill-feature-in-FeatureCAM" target="_blank" rel="noopener"&gt;Unable to generate required helical passes in thread mill feature in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a 4-axis undercut deburr with a lollipop cutter in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-4-axis-undercut-deburr-with-a-lollipop-cutter-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a 4-axis undercut deburr with a lollipop cutter in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;PartMaker 3D surface milling not reading custom DXF tool shape properly&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PartMaker-3D-surface-milling-not-reading-custom-DXF-tool-shape-properly" target="_blank" rel="noopener"&gt;PartMaker 3D surface milling not reading custom DXF tool shape properly&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to remove a hole from a solid model in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-remove-a-hole-from-a-solid-model-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to remove a hole from a solid model in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="899" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable to see a center mark for an arc or circle in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-see-a-center-mark-for-an-arc-or-circle-in-FeatureCAM" target="_blank" rel="noopener"&gt;Unable to see a center mark for an arc or circle in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to generate individual programs for each setup in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-generate-individual-programs-for-each-setup-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to generate individual programs for each setup in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;AMDEU licensing error while simulating toolpaths in PartMaker&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:3,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:[null,2,353217],&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/AMDEU-licensing-error-while-simulating-toolpaths-in-PartMaker" target="_blank" rel="noopener"&gt;AMDEU licensing error while simulating toolpaths in PartMaker&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to access FeatureCAM subscription help pages offline&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:3,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:[null,2,353217],&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-access-FeatureCAM-subscription-help-pages-offline" target="_blank" rel="noopener"&gt;How to access FeatureCAM subscription help pages offline&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="899" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;5-axis spine finishing toolpath is lifting off of the part in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/5-axis-spine-finishing-toolpath-is-lifting-off-of-the-part-in-PartMaker" target="_blank" rel="noopener"&gt;5-axis spine finishing toolpath is lifting off of the part in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error: \&amp;quot;No spine data\&amp;quot; when calculating a spine finishing toolpath in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-No-spine-data-when-calculating-a-spine-finishing-toolpath-in-PartMaker" target="_blank" rel="noopener"&gt;Error: "No spine data" when calculating a spine finishing toolpath in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;PartMaker is posting incorrect file extension&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PartMaker-is-posting-incorrect-file-extension" target="_blank" rel="noopener"&gt;PartMaker is posting incorrect file extension&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to change a turning tool flash angle in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-a-turning-tool-flash-angle-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to change a turning tool flash angle in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="612" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-the-default-color-of-a-solid-in-FeatureCAM&amp;quot;}"&gt;&lt;A href="http://knowledge.autodesk.com/article/How-to-change-the-default-color-of-a-solid-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-change-the-default-color-of-a-solid-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-move-Setup-location-to-stock-face-in-FeatureCAM-2018&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Why-does-PowerMILL-keyboard-shortcut-fail-to-run-macro-after-logging-out-and-back-in-again" target="_blank" rel="noopener"&gt;How-to-move-Setup-location-to-stock-face-in-FeatureCAM-2018&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;A style="font-family: inherit; background-color: #ffffff;" href="https://knowledge.autodesk.com/support/featurecam/troubleshooting/caas/sfdcarticles/sfdcarticles/Nothing-is-showing-in-the-operation-list-when-a-turning-operation-is-started-in-FeatureCAM.html" target="_blank" rel="noopener"&gt;Nothing-is-showing-in-the-operation-list-when-a-turning-operation-is-started-in-FeatureCAM&lt;/A&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="707" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error: \&amp;quot;Simulation Aborted due to Unexpected Error #21\&amp;quot; in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Simulation-Aborted-due-to-Unexpected-Error-21-in-PartMaker" target="_blank" rel="noopener"&gt;Error: "Simulation Aborted due to Unexpected Error #21" in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error:\&amp;quot;ONE OR MORE SOFT ERRORS THIS NC-CODE WILL NOT RUN PROPERLY\&amp;quot; while generating NC codes in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-ONE-OR-MORE-SOFT-ERRORS-THIS-NC-CODE-WILL-NOT-RUN-PROPERLY-while-generating-Nc-codes-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error:"ONE OR MORE SOFT ERRORS THIS NC-CODE WILL NOT RUN PROPERLY" while generating NC codes in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a mirror text in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-mirror-text-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a mirror text in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Side feature plunging into stock when roughing with NT Spiral stepover in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Side-feature-plunging-into-stock-when-roughing-with-NT-Spiral-stepover-in-FeatureCAM" target="_blank" rel="noopener"&gt;Side feature plunging into stock when roughing with NT Spiral stepover in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a chamfer toolpath with a shaped tool in FeatureCAM.&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-chamfer-toolpath-with-a-shaped-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a chamfer toolpath with a shaped tool in FeatureCAM.&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error: \&amp;quot;Library access violation: 41073-1245060\&amp;quot; shows when simulation crashes in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Library-access-violation-41073-1245060-shows-when-simulation-crashes-in-PartMaker" target="_blank" rel="noopener"&gt;Error: "Library access violation: 41073-1245060" shows when simulation crashes in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;User interface very slow when connected through VPN within FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/User-interface-very-slow-when-connected-through-VPN-within-FeatureCAM" target="_blank" rel="noopener"&gt;User interface very slow when connected through VPN within FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to convert curve in geometry in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-convert-curve-in-geometry-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to convert curve in geometry in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to disable the tool load graph when a 3D simulation is launched in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-disable-the-tool-load-graph-when-a-3D-simulation-is-launched-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to disable the tool load graph when a 3D simulation is launched in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Constant Z surfacing strategy splitting toolpath in half in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Constant-Z-surfacing-strategy-splitting-toolpath-in-half-in-PartMaker" target="_blank" rel="noopener"&gt;Constant Z surfacing strategy splitting toolpath in half in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to use the copy/paste special command in FeatureCAM to copy attributes from one toolpath to another&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-use-the-copy-paste-special-command-in-FeatureCAM-to-copy-attributes-from-one-toolpath-to-another" target="_blank" rel="noopener"&gt;How to use the copy/paste special command in FeatureCAM to copy attributes from one toolpath to another&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Print preview is too close in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Print-preview-is-too-close-in-FeatureCAM" target="_blank" rel="noopener"&gt;Print preview is too close in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Turning bore cuts air when roughing in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Turning-bore-cuts-air-when-roughing-in-FeatureCAM" target="_blank" rel="noopener"&gt;Turning bore cuts air when roughing in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;SQL tool database won't initialize in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/SQL-tool-database-won-t-initialize-in-FeatureCAM" target="_blank" rel="noopener"&gt;SQL tool database won't initialize in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Is it possible to perform an entire drill cycle on one hole before moving to the next in PartMaker?&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Is-it-possible-to-perform-an-entire-drill-cycle-on-one-hole-before-moving-to-the-next-in-PartMaker" target="_blank" rel="noopener"&gt;Is it possible to perform an entire drill cycle on one hole before moving to the next in PartMaker?&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a 3D internal groove using a side mill in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-3D-internal-groove-using-a-side-mill-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a 3D internal groove using a side mill in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;System becomes slow while rotating a model in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/System-becomes-slow-while-rotating-a-model-in-FeatureCAM" target="_blank" rel="noopener"&gt;System becomes slow while rotating a model in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to set a plunge depth based on the diameter of a tool in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-a-plunge-depth-based-on-the-diameter-of-a-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to set a plunge depth based on the diameter of a tool in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error:\&amp;quot;0xb0000005: Exception access violation\&amp;quot; and software crash when running 3D simulation in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-0xb0000005-Exception-access-violation-and-software-crash-when-running-3D-simulation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error:"0xb0000005: Exception access violation" and software crash when running 3D simulation in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to move the plunge point on toolpath in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-move-the-plunge-point-on-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to move the plunge point on toolpath in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to remove locations from a rectangular pattern in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-remove-locations-from-a-rectangular-pattern-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to remove locations from a rectangular pattern in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Main spindle operations are posting to the sub-spindle in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Main-spindle-operations-are-posting-to-the-sub-spindle-in-PartMaker" target="_blank" rel="noopener"&gt;Main spindle operations are posting to the sub-spindle in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;File Info disappears in FeatureCAM 2018&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/File-Info-disappears-in-FeatureCAM-2018" target="_blank" rel="noopener"&gt;File Info disappears in FeatureCAM 2018&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create multiple hole features from a wireframe quickly in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-multiple-hole-features-from-a-wireframe-quickly-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create multiple hole features from a wireframe quickly in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Imported holder solid model not seated in spindle in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Imported-holder-solid-model-not-seated-in-spindle-in-FeatureCAM" target="_blank" rel="noopener"&gt;Imported holder solid model not seated in spindle in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a cleanup pass that returns a thread operation in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-cleanup-pass-that-returns-a-thread-operation-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a cleanup pass that returns a thread operation in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create hole features from DXF points in Featurecam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-hole-features-from-DXF-points-in-Featurecam" target="_blank" rel="noopener"&gt;How to create hole features from DXF points in Featurecam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to select index center of rotation in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-select-index-center-of-rotation-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to select index center of rotation in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error: \&amp;quot;Cannot run vizicut part compare without a solid target.\&amp;quot; after running a simulation in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Cannot-run-vizicut-part-compare-without-a-solid-target-after-running-a-simulation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error: "Cannot run vizicut part compare without a solid target." after running a simulation in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a finish pass for the bottom then machine the corners using a smaller tool in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-finish-pass-for-the-bottom-then-machine-the-corners-using-a-smaller-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a finish pass for the bottom then machine the corners using a smaller tool in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to minimize extra toolpath movements in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-minimize-extra-toolpath-movements-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to minimize extra toolpath movements in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;No metric tooling found in the Tools tool crib in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/No-metric-tooling-found-in-the-Tools-tool-crib-in-FeatureCAM" target="_blank" rel="noopener"&gt;No metric tooling found in the Tools tool crib in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Vortex in a narrow side feature is causing unwanted retracts in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Vortex-in-a-narrow-side-feature-is-causing-unwanted-retracts-in-FeatureCAM" target="_blank" rel="noopener"&gt;Vortex in a narrow side feature is causing unwanted retracts in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a Multiple fixture project with n repetitions of a single setup using more origins in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-Multiple-fixture-project-with-n-repetitions-of-a-single-setup-using-more-origins-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a Multiple fixture project with n repetitions of a single setup using more origins in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a Multiple fixture project with n repetitions of a single setup using more origins in FeatureCAM.&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-Multiple-fixture-project-with-n-repetitions-of-a-single-setup-using-more-origins-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a Multiple fixture project with n repetitions of a single setup using more origins in FeatureCAM.&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Tool cutting on centerline but location is set to left/right in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Tool-cutting-on-centerline-but-location-is-set-to-left-in-PartMaker" target="_blank" rel="noopener"&gt;Tool cutting on centerline but location is set to left/right in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;The text dimensions are too little or too big to read in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-text-dimensions-are-too-little-or-too-big-to-read-in-FeatureCAM" target="_blank" rel="noopener"&gt;The text dimensions are too little or too big to read in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to counterdrill the large hole first in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-counterdrill-the-large-hole-first-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to counterdrill the large hole first in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a continuous Finish operation in a Side Feature in FeatureCAM.&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-continuous-Finish-operation-in-a-Side-Feature-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a continuous Finish operation in a Side Feature in FeatureCAM.&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Increased feed rate for non-cutting moves for vortex not being posted correct in code in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Increased-feed-rate-for-non-cutting-moves-for-vortex-not-being-posted-correct-in-code-in-FeatureCAM" target="_blank" rel="noopener"&gt;Increased feed rate for non-cutting moves for vortex not being posted correct in code in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="809" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a Chamfer toolpath with automatic recognition by using Side Mill Features in FeatureCAM.&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-Chamfer-toolpath-with-automatic-recognition-by-using-Side-Mill-Features-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a Chamfer toolpath with automatic recognition by using Side Mill Features in FeatureCAM.&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Are there a list of simulation error codes for PartMaker?&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Are-there-a-list-of-simulation-error-codes-for-PartMaker" target="_blank" rel="noopener"&gt;Are there a list of simulation error codes for PartMaker?&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a custom slitting tool in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-custom-slitting-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a custom slitting tool in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error: \&amp;quot;Could not write to\&amp;quot; when creating an NC program in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Could-not-write-to-when-creating-an-NC-program-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error: "Could not write to" when creating an NC program in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a toolpath from an NC code in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-toolpath-from-an-NC-code-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a toolpath from an NC code in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Spiral face UDF does not follow inside of the curve in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Spiral-face-UDF-does-not-follow-inside-of-the-curve-in-FeatureCAM" target="_blank" rel="noopener"&gt;Spiral face UDF does not follow inside of the curve in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to define a counter clockwise rotation for thread milling in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-define-a-counter-clockwise-rotation-for-thread-milling-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to define a counter clockwise rotation for thread milling in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Finish pass cuts outside of rough pass when using negative leave and finish allowances in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Finish-pass-cuts-outside-of-rough-pass-when-using-negative-leave-and-finish-allowances-in-FeatureCAM" target="_blank" rel="noopener"&gt;Finish pass cuts outside of rough pass when using negative leave and finish allowances in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to set Z rapid plane in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-Z-rapid-plane-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to set Z rapid plane in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to change tool in more operation at the same time into the Operation List in FeatureCAM.&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-tool-in-more-operation-at-the-same-time-into-the-Operation-List-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to change tool in more operation at the same time into the Operation List in FeatureCAM.&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to set the default feed and speed of tools in tool manager on FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-the-default-feed-and-speed-of-tools-in-tool-manager-on-FeatureCAM" target="_blank" rel="noopener"&gt;How to set the default feed and speed of tools in tool manager on FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Save Simulation Results not available in FeatureCAM&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:268418,&amp;quot;4&amp;quot;:{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:16776960},&amp;quot;10&amp;quot;:2,&amp;quot;14&amp;quot;:[null,2,255],&amp;quot;15&amp;quot;:&amp;quot;Arial&amp;quot;,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Save-Simulation-Results-not-available-in-FeatureCAM" target="_blank" rel="noopener"&gt;Save Simulation Results not available in FeatureCAM&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="760" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-set-the-tool-collision-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-show-annotations-from-existing-items-on-Isometric-drawings-in-AutoCAD-Plant-3D" target="_blank" rel="noopener"&gt;How-to-set-the-tool-collision-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Addins-tab-not-switchable-grey-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-machine-part-walls-using-up-down-finishing-passes-in-PowerMill" target="_blank" rel="noopener"&gt;Addins-tab-not-switchable-grey-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-stock-from-square-to-round-to-modify-a-project-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Switch-Team-option-missing-in-Fusion-360-for-the-editor-of-a-Fusion-Team-Hub-project" target="_blank" rel="noopener"&gt;How-to-change-stock-from-square-to-round-to-modify-a-project-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-insert-drill-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Infraworks-ArcGIS-Data-Connection-does-not-work-due-to-error" target="_blank" rel="noopener"&gt;How-to-create-a-insert-drill-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-to-modify-feed-speed-and-tool-number-in-multiple-fixture-document-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Temperature-values-on-heat-source-do-not-reflect-reality-in-Autodesk-CFD" target="_blank" rel="noopener"&gt;Unable-to-modify-feed-speed-and-tool-number-in-multiple-fixture-document-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-the-tool-diameter-inside-a-Multiple-Fixture-file-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Form-mill-does-not-look-like-the-imported-tool-model-in-HSM-or-Fusion-360-CAM" target="_blank" rel="noopener"&gt;How-to-change-the-tool-diameter-inside-a-Multiple-Fixture-file-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Surface-milling-feature-roughing-pass-not-cutting-properly-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Moldflow-causing-explorer-exe-to-crash" target="_blank" rel="noopener"&gt;Surface-milling-feature-roughing-pass-not-cutting-properly-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-turning-feature-toolpath-by-using-a-shaped-tool-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/userSetup-melを使ってMtoA-2-0-2-4のプラグインを読み込ませると-バッチレンダーでlookdevkitシェーダが正しく読み込まれない" target="_blank" rel="noopener"&gt;How-to-create-a-turning-feature-toolpath-by-using-a-shaped-tool-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-5-axis-positioned-drilling-toolpath-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/All-files-and-projects-went-missing-in-a-BIM-360-Document-Management-account" target="_blank" rel="noopener"&gt;How-to-create-a-5-axis-positioned-drilling-toolpath-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-run-the-UDF-thin-wall-milling-macro-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Moldflow-insightの反り解析のみジョブマネージャの解析結果ダウンロード中で失敗する" target="_blank" rel="noopener"&gt;How-to-run-the-UDF-thin-wall-milling-macro-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-have-only-one-pre-dill-in-a-milling-operation-within-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Can-t-read-the-broken-document-when-attempting-to-open-a-document-from-the-BIM-360-Field-project-library" target="_blank" rel="noopener"&gt;How-to-have-only-one-pre-dill-in-a-milling-operation-within-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-broach-a-keyway-in-a-milling-document-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PowerMILL-Saving-Machine-model-with-project-so-as-to-open-on-another-system-with-MTD" target="_blank" rel="noopener"&gt;How-to-broach-a-keyway-in-a-milling-document-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-enable-3D-cutter-compensation-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Is-it-possible-to-use-a-pipe-as-a-target-object-in-Subassembly-Composer-in-Civil-3D" target="_blank" rel="noopener"&gt;How-to-enable-3D-cutter-compensation-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-add-notes-between-features-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Slow-performance-while-opening-Views-and-Sheets-in-the-Project-Navigator-in-AutoCAD-Architecture-MEP" target="_blank" rel="noopener"&gt;How-to-add-notes-between-features-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;User-defined-icons-are-getting-lost-from-the-quick-access-toolbar-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-run-the-UDF-thin-wall-milling-macro-in-FeatureCAM" target="_blank" rel="noopener"&gt;User-defined-icons-are-getting-lost-from-the-quick-access-toolbar-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-the-Select-Tool-Parameter-options-in-Manage-tools-file-window-in-Partmaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-can-using-revision-control-in-Vault-Basic" target="_blank" rel="noopener"&gt;How-to-change-the-Select-Tool-Parameter-options-in-Manage-tools-file-window-in-Partmaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-3D-simulation-180-degrees-out-of-position&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Appearances-from-Inventor-have-index-numbers-when-brought-into-AutoCAD" target="_blank" rel="noopener"&gt;FeatureCAM-3D-simulation-180-degrees-out-of-position&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Check-surfaces-button-is-greyed-out-in-the-side-feature-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-can-deactivating-creating-dwf-during-checking-in-into-Vault" target="_blank" rel="noopener"&gt;Check-surfaces-button-is-greyed-out-in-the-side-feature-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Stepover-value-for-face-feature-is-not-following-default-values-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/System-requirements-for-AutoCAD-for-Mac-2019" target="_blank" rel="noopener"&gt;Stepover-value-for-face-feature-is-not-following-default-values-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Cutting-an-internal-radius-into-shaft-but-toolpath-appears-on-opposite-side-of-the-lathe-after-export-from-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/TIFFファイルなどのイメージファイルをインポートすると解像度が変わってしまうことがある" target="_blank" rel="noopener"&gt;Cutting-an-internal-radius-into-shaft-but-toolpath-appears-on-opposite-side-of-the-lathe-after-export-from-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-transform-a-UCS-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-add-files-and-folders-directly-to-a-Vault" target="_blank" rel="noopener"&gt;How-to-transform-a-UCS-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="899" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Is it necessary to install software patches from the oldest to the newest for FeatureCAM and PowerMill?&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Is-it-necessary-to-install-software-patches-from-the-oldest-to-the-newest-for-FeatureCAM-and-PowerMill" target="_blank" rel="noopener"&gt;Is it necessary to install software patches from the oldest to the newest for FeatureCAM and PowerMill?&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Is it possible to set a maximum depth of cut in Z-Level Finish strategy when we use the option scallop stepover in FeatureCAM?&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Is-it-possible-to-set-a-maximum-depth-of-cut-in-Z-Level-Finish-strategy-when-we-use-the-option-scallop-stepover-in-FeatureCAM" target="_blank" rel="noopener"&gt;Is it possible to set a maximum depth of cut in Z-Level Finish strategy when we use the option scallop stepover in FeatureCAM?&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Incorrect profle when use compensation in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Incorrect-profle-when-use-compensation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Incorrect profle when use compensation in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to set up a path for files in the open document folder in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-up-a-path-for-files-in-the-open-document-folder-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to set up a path for files in the open document folder in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to unlock a FeatureCAM MD file&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-unlock-a-FeatureCAM-MD-file" target="_blank" rel="noopener"&gt;How to unlock a FeatureCAM MD file&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error: TPD9999: when changing some geometry in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-TPD9999-when-changing-some-geometry-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error: TPD9999: when changing some geometry in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to quickly select multiple surfaces in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-quickly-select-multiple-surfaces-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to quickly select multiple surfaces in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Setup sheet add-in is not printing images in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Setup-sheet-add-in-is-not-printing-images-in-FeatureCAM" target="_blank" rel="noopener"&gt;Setup sheet add-in is not printing images in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to modify a 2.5D feature by editing the curve in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-modify-a-2-5D-feature-by-editing-the-curve-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to modify a 2.5D feature by editing the curve in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Features icon is not available in FeatureCAM trial version&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Features-icon-is-not-available-in-FeatureCAM-trial-version" target="_blank" rel="noopener"&gt;Features icon is not available in FeatureCAM trial version&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM API documentation missing information from recent versions of FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-API-documentation-missing-information-from-recent-versions-of-FeatureCAM" target="_blank" rel="noopener"&gt;FeatureCAM API documentation missing information from recent versions of FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;DXF file dimensions change after import from AutoCAD into FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/DXF-file-dimensions-change-after-import-from-AutoCAD-into-FeatureCAM" target="_blank" rel="noopener"&gt;DXF file dimensions change after import from AutoCAD into FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error: \&amp;quot;Unable to construct object with these inputs\&amp;quot; when creating a curve mesh surface in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Unable-to-construct-object-with-these-inputs-when-creating-a-curve-mesh-surface-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error: "Unable to construct object with these inputs" when creating a curve mesh surface in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;A custom tab is not saving new items correctly in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/A-custom-tab-is-not-saving-new-items-correctly-in-FeatureCAM" target="_blank" rel="noopener"&gt;A custom tab is not saving new items correctly in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to get tools list in excel format from FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-get-tools-list-in-excel-format-from-FeatureCAM" target="_blank" rel="noopener"&gt;How to get tools list in excel format from FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;PartMaker post editor showing a blank screen after opening post&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PartMaker-post-editor-showing-a-blank-screen-after-opening-post" target="_blank" rel="noopener"&gt;PartMaker post editor showing a blank screen after opening post&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Machine simulation file retracting to home position when Indexing in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Machine-simulation-file-retracting-to-home-position-when-Indexing-in-FeatureCAM" target="_blank" rel="noopener"&gt;Machine simulation file retracting to home position when Indexing in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to limit a toolpath in a surface feature by using the results of the previous 2.5D features in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-limit-a-toolpath-in-a-surface-feature-by-using-the-results-of-the-previous-2-5D-features-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to limit a toolpath in a surface feature by using the results of the previous 2.5D features in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to slow the feed in move on a thread milling feature in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-slow-the-feed-in-move-on-a-thread-milling-feature-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to slow the feed in move on a thread milling feature in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;</description>
    <pubDate>Thu, 02 Jan 2020 18:15:36 GMT</pubDate>
    <dc:creator>diana.yr</dc:creator>
    <dc:date>2020-01-02T18:15:36Z</dc:date>
    <item>
      <title>2019  Latest Updates | New Knowledge Network Articles | FeatureCAM</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/2019-latest-updates-new-knowledge-network-articles-featurecam/m-p/8511341#M4142</link>
      <description>&lt;DIV class="lia-message-subject lia-component-message-view-widget-subject"&gt;&amp;nbsp;&lt;/DIV&gt;
&lt;DIV id="messageBodySimpleDisplay" class="lia-message-body lia-component-body-signature-highlight-escalation"&gt;
&lt;DIV class="lia-message-body-content"&gt;
&lt;P&gt;&lt;STRONG&gt;Question: Where can I find a list of the latest&amp;nbsp;Autodesk Knowledge Network&amp;nbsp;support solutions&amp;nbsp;that were created and/or updated for FeatureCAM?&lt;/STRONG&gt;&lt;/P&gt;
&lt;P&gt;&lt;EM&gt;(List shown in chronological order)&lt;/EM&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;CENTER&gt;&lt;STRONG&gt;&amp;nbsp;Subscribe to receive updates for new FeatureCAM's Knowledge Network articles.&lt;/STRONG&gt;&lt;SPAN&gt;&amp;nbsp;&lt;/SPAN&gt;&lt;/CENTER&gt;&lt;CENTER&gt;&lt;A href="https://autode.sk/2lu7X5o" target="_blank" rel="noopener"&gt;2018 Solutions&lt;/A&gt;&lt;BR /&gt;For more updated solutions, also check out the&lt;SPAN&gt;&amp;nbsp;&lt;/SPAN&gt;&lt;STRONG&gt;&lt;A href="https://www.autodesk.com/blogs" target="_blank" rel="nofollow noopener noreferrer noopener noreferrer noopener noreferrer"&gt;Autodesk Blogs&lt;/A&gt;&lt;/STRONG&gt;!&lt;/CENTER&gt;&lt;/DIV&gt;
&lt;/DIV&gt;</description>
      <pubDate>Tue, 24 Sep 2019 22:28:27 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/2019-latest-updates-new-knowledge-network-articles-featurecam/m-p/8511341#M4142</guid>
      <dc:creator>diana.yr</dc:creator>
      <dc:date>2019-09-24T22:28:27Z</dc:date>
    </item>
    <item>
      <title>Re: 2019  Latest Updates | New Knowledge Network Articles | FeatureCAM</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/2019-latest-updates-new-knowledge-network-articles-featurecam/m-p/8511345#M4143</link>
      <description>&lt;P&gt;December 2019&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="920" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-add-cutter-comp-to-a-drill-mill-operation-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/How-to-add-cutter-comp-to-a-drill-mill-operation-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-add-cutter-comp-to-a-drill-mill-operation-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-add-cutter-comp-to-a-drill-mill-operation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Creating-a-Setup-with-no-surface-to-align-to-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/Creating-a-Setup-with-no-surface-to-align-to-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Creating-a-Setup-with-no-surface-to-align-to-in-FeatureCAM" target="_blank" rel="noopener"&gt;Creating-a-Setup-with-no-surface-to-align-to-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-to-open-xbuild-in-FeatureCam-2017&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/Unable-to-open-xbuild-in-FeatureCam-2017"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-open-xbuild-in-FeatureCam-2017" target="_blank" rel="noopener"&gt;Unable-to-open-xbuild-in-FeatureCam-2017&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-Form-tool-for-Turning-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/How-to-create-a-Form-tool-for-Turning-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-Form-tool-for-Turning-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-Form-tool-for-Turning-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;5-axis-swarf-toolpath-gouging-part-despite-showing-correct-simulation-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/5-axis-swarf-toolpath-gouging-part-despite-showing-correct-simulation-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/5-axis-swarf-toolpath-gouging-part-despite-showing-correct-simulation-in-FeatureCAM" target="_blank" rel="noopener"&gt;5-axis-swarf-toolpath-gouging-part-despite-showing-correct-simulation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Which-turning-toolpaths-will-use-a-round-insert-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/Which-turning-toolpaths-will-use-a-round-insert-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Which-turning-toolpaths-will-use-a-round-insert-in-FeatureCAM" target="_blank" rel="noopener"&gt;Which-turning-toolpaths-will-use-a-round-insert-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="960" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-optimize-a-side-finishing-with-swarf-toolpath-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/How-to-optimize-a-side-finishing-with-swarf-toolpath-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-optimize-a-side-finishing-with-swarf-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-optimize-a-side-finishing-with-swarf-toolpath-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;The-Simulation-package-cannot-model-the-tool-for-an-3D-Simulation-at-FeatureCam&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/The-Simulation-package-cannot-model-the-tool-for-an-3D-Simulation-at-FeatureCam"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-Simulation-package-cannot-model-the-tool-for-an-3D-Simulation-at-FeatureCam" target="_blank" rel="noopener"&gt;The-Simulation-package-cannot-model-the-tool-for-an-3D-Simulation-at-FeatureCam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-feedrate-on-parts-of-toolpath-in-FeatrueCam&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/How-to-change-feedrate-on-parts-of-toolpath-in-FeatrueCam"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-feedrate-on-parts-of-toolpath-in-FeatrueCam" target="_blank" rel="noopener"&gt;How-to-change-feedrate-on-parts-of-toolpath-in-FeatrueCam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Bar-feed-position-incorrect-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/Bar-feed-position-incorrect-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Bar-feed-position-incorrect-in-FeatureCAM" target="_blank" rel="noopener"&gt;Bar-feed-position-incorrect-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;3D-simulation-is-wrong-with-advance-turn-mill-operation-using-alternate-direction-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/3D-simulation-is-wrong-with-advance-turn-mill-operation-using-alternate-direction-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/3D-simulation-is-wrong-with-advance-turn-mill-operation-using-alternate-direction-in-FeatureCAM" target="_blank" rel="noopener"&gt;3D-simulation-is-wrong-with-advance-turn-mill-operation-using-alternate-direction-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-reduce-the-ISO-file-size-in-FeatureCAM&amp;quot;}" data-sheets-hyperlink="http://knowledge.autodesk.com/article/How-to-reduce-the-ISO-file-size-in-FeatureCAM"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-reduce-the-ISO-file-size-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-reduce-the-ISO-file-size-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="922" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;5-axis-toolpath-is-indexing-out-of-position-by-180-degrees-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/5-axis-toolpath-is-indexing-out-of-position-by-180-degrees-in-FeatureCAM" target="_blank" rel="noopener"&gt;5-axis-toolpath-is-indexing-out-of-position-by-180-degrees-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-How-do-i-measure-model-sizes&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-How-do-i-measure-model-sizes" target="_blank" rel="noopener"&gt;FeatureCAM-How-do-i-measure-model-sizes&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-side-feature-with-feature-recognition-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-side-feature-with-feature-recognition-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-side-feature-with-feature-recognition-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-avoid-tool-collision-at-the-end-of-an-ID-boring-toolpath-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-avoid-tool-collision-at-the-end-of-an-ID-boring-toolpath-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-avoid-tool-collision-at-the-end-of-an-ID-boring-toolpath-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;IGES-export-of-FeatureCAM-exports-all-solids-as-only-one&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/IGES-export-of-FeatureCAM-exports-all-solids-as-only-one" target="_blank" rel="noopener"&gt;IGES-export-of-FeatureCAM-exports-all-solids-as-only-one&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-convert-a-project-from-imperial-to-metric-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-convert-a-project-from-imperial-to-metric-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-convert-a-project-from-imperial-to-metric-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Query-for-newer-version-of-CAD-model-no-longer-appears-in-FeatureCam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Query-for-newer-version-of-CAD-model-no-longer-appears-in-FeatureCam" target="_blank" rel="noopener"&gt;Query-for-newer-version-of-CAD-model-no-longer-appears-in-FeatureCam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-multiple-chamfer-toolpaths-with-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-multiple-chamfer-toolpaths-with-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-multiple-chamfer-toolpaths-with-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-Mill-Diameter-Polar-toolpath-with-a-flat-endmill-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-Mill-Diameter-Polar-toolpath-with-a-flat-endmill-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-create-a-Mill-Diameter-Polar-toolpath-with-a-flat-endmill-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Tool-axis-of-wrapped-toolpath-is-wrong-when-Setup-X-Axis-and-Stock-X-Axis-do-not-match-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Tool-axis-of-wrapped-toolpath-is-wrong-when-Setup-X-Axis-and-Stock-X-Axis-do-not-match-in-FeatureCAM" target="_blank" rel="noopener"&gt;Tool-axis-of-wrapped-toolpath-is-wrong-when-Setup-X-Axis-and-Stock-X-Axis-do-not-match-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-Multi-axis-Flowline-toolpath-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-Multi-axis-Flowline-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-Multi-axis-Flowline-toolpath-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;When-opening-an-old-turn-mill-project-in-FeatureCAM-Standard-none-of-the-features-can-be-simulated&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/When-opening-an-old-turn-mill-project-in-FeatureCAM-Standard-none-of-the-features-can-be-simulated" target="_blank" rel="noopener"&gt;When-opening-an-old-turn-mill-project-in-FeatureCAM-Standard-none-of-the-features-can-be-simulated&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-machine-a-user-defined-chamfer-angle-as-a-side-or-pocket-feature-in-Featurecam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-machine-a-user-defined-chamfer-angle-as-a-side-or-pocket-feature-in-Featurecam" target="_blank" rel="noopener"&gt;How-to-machine-a-user-defined-chamfer-angle-as-a-side-or-pocket-feature-in-Featurecam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-add-offset-axis-in-a-toolpath-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-add-offset-axis-in-a-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-add-offset-axis-in-a-toolpath-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;The-Automatic-tool-Selection-selects-wrong-tool-diameter-in-FeatureCam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-Automatic-tool-Selection-selects-wrong-tool-diameter-in-FeatureCam" target="_blank" rel="noopener"&gt;The-Automatic-tool-Selection-selects-wrong-tool-diameter-in-FeatureCam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-thread-mill-tool-with-taper-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-thread-mill-tool-with-taper-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-thread-mill-tool-with-taper-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Roughing-pass-not-posting-in-a-turning-document-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Roughing-pass-not-posting-in-a-turning-document-in-FeatureCAM" target="_blank" rel="noopener"&gt;Roughing-pass-not-posting-in-a-turning-document-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-Change-the-Tool-Orientation-for-a-Slot-in-a-Turn-Mill-Project-at-FeatureCam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-Change-the-Tool-Orientation-for-a-Slot-in-a-Turn-Mill-Project-at-FeatureCam" target="_blank" rel="noopener"&gt;How-to-Change-the-Tool-Orientation-for-a-Slot-in-a-Turn-Mill-Project-at-FeatureCam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;TPU01-code-error-when-simulating-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/TPU01-code-error-when-simulating-in-FeatureCAM" target="_blank" rel="noopener"&gt;TPU01-code-error-when-simulating-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Toolpaths-converted-to-Toolpath-Features-do-not-retract-for-indexing-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Toolpaths-converted-to-Toolpath-Features-do-not-retract-for-indexing-in-FeatureCAM" target="_blank" rel="noopener"&gt;Toolpaths-converted-to-Toolpath-Features-do-not-retract-for-indexing-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-to-do-roughing-in-Mill-Cylinder-window-with-3D-surfacing-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-do-roughing-in-Mill-Cylinder-window-with-3D-surfacing-in-PartMaker" target="_blank" rel="noopener"&gt;Unable-to-do-roughing-in-Mill-Cylinder-window-with-3D-surfacing-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-turn-profile-curve-from-a-solid-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-turn-profile-curve-from-a-solid-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-turn-profile-curve-from-a-solid-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Imported-toolpath-tilts-in-PowerMill-but-not-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Imported-toolpath-tilts-in-PowerMill-but-not-in-PartMaker" target="_blank" rel="noopener"&gt;Imported-toolpath-tilts-in-PowerMill-but-not-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="993" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-use-a-right-angle-head-90-degree-head-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-use-a-right-angle-head-90-degree-head-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-use-a-right-angle-head-90-degree-head-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;The-simulation-package-cannot-model-the-tool-in-3D-simulation-with-a-form-tool-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-simulation-package-cannot-model-the-tool-in-3D-simulation-with-a-form-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;The-simulation-package-cannot-model-the-tool-in-3D-simulation-with-a-form-tool-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Recognising-holes-on-a-p-c-d-on-a-turnmill-in-Featurecam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Recognising-holes-on-a-p-c-d-on-a-turnmill-in-Featurecam" target="_blank" rel="noopener"&gt;Recognising-holes-on-a-p-c-d-on-a-turnmill-in-Featurecam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;114-format-error-in-macro-alarm-on-machine-tool-when-running-NC-code-from-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/114-format-error-in-macro-alarm-on-machine-tool-when-running-NC-code-from-FeatureCAM" target="_blank" rel="noopener"&gt;114-format-error-in-macro-alarm-on-machine-tool-when-running-NC-code-from-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;November 2019&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="1032" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-4-axis-project-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-4-axis-project-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-4-axis-project-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-display-eccentric-stock-in-Featurecam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-display-eccentric-stock-in-Featurecam" target="_blank" rel="noopener"&gt;How-to-display-eccentric-stock-in-Featurecam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Stay-at-Depth-setting-in-PartMaker-Contour-On-milling-operation-causes-Rapid-into-stock-in-simulation-and-code&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Stay-at-Depth-setting-in-PartMaker-Contour-On-milling-operation-causes-Rapid-into-stock-in-simulation-and-code" target="_blank" rel="noopener"&gt;Stay-at-Depth-setting-in-PartMaker-Contour-On-milling-operation-causes-Rapid-into-stock-in-simulation-and-code&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;PartMaker-cycle-time-is-incorrect-when-feeds-and-speeds-are-set-to-Calculated-in-Tool-Definition&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PartMaker-cycle-time-is-incorrect-when-feeds-and-speeds-are-set-to-Calculated-in-Tool-Definition" target="_blank" rel="noopener"&gt;PartMaker-cycle-time-is-incorrect-when-feeds-and-speeds-are-set-to-Calculated-in-Tool-Definition&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-doesn-t-launch-after-selecting-the-license-type&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-doesn-t-launch-after-selecting-the-license-type" target="_blank" rel="noopener"&gt;FeatureCAM-doesn-t-launch-after-selecting-the-license-type&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Number-of-finish-passes-not-being-respected-in-a-side-feature-finishing-operation-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Number-of-finish-passes-not-being-respected-in-a-side-feature-finishing-operation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Number-of-finish-passes-not-being-respected-in-a-side-feature-finishing-operation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="1032" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;BIM-360-Docs-Multiple-attributes-with-the-same-name-show-in-document-subfolder&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/BIM-360-Docs-Multiple-attributes-with-the-same-name-show-in-document-subfolder" target="_blank" rel="noopener"&gt;BIM-360-Docs-Multiple-attributes-with-the-same-name-show-in-document-subfolder&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-an-undercut-internal-groove-in-FeatureCAM-turning&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-an-undercut-internal-groove-in-FeatureCAM-turning" target="_blank" rel="noopener"&gt;How-to-create-an-undercut-internal-groove-in-FeatureCAM-turning&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="920" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;nc-code-from-featurecam-is-too-large-for-machine-controller&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/nc-code-from-featurecam-is-too-large-for-machine-controller" target="_blank" rel="noopener"&gt;nc-code-from-featurecam-is-too-large-for-machine-controller&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-select-a-tailstock-support-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-select-a-tailstock-support-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-select-a-tailstock-support-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-to-import-Solidworks-2020-file-into-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-import-Solidworks-2020-file-into-FeatureCAM" target="_blank" rel="noopener"&gt;Unable-to-import-Solidworks-2020-file-into-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Ribbon-or-menu-customization-has-disappeared-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Ribbon-or-menu-customization-has-disappeared-in-FeatureCAM" target="_blank" rel="noopener"&gt;Ribbon-or-menu-customization-has-disappeared-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Machine-simulation-is-different-to-3D-simulation-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Machine-simulation-is-different-to-3D-simulation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Machine-simulation-is-different-to-3D-simulation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;NC-code-not-in-main-and-sub-program-format-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/NC-code-not-in-main-and-sub-program-format-in-FeatureCAM" target="_blank" rel="noopener"&gt;NC-code-not-in-main-and-sub-program-format-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-reduce-NC-Code-data-for-wrapping-operation-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-reduce-NC-Code-data-for-wrapping-operation-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-reduce-NC-Code-data-for-wrapping-operation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;The-word-Stream-has-appeared-in-the-NC-code-from-FeatureCAM&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:0,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:[null,2,353217],&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:9,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-word-Stream-has-appeared-in-the-NC-code-from-FeatureCAM" target="_blank" rel="noopener"&gt;The-word-Stream-has-appeared-in-the-NC-code-from-FeatureCAM&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" style="width: 880px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="636" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;3D-milling-finish-operation-is-skipping-the-bottom-surface-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/3D-milling-finish-operation-is-skipping-the-bottom-surface-in-FeatureCAM" target="_blank" rel="noopener"&gt;3D-milling-finish-operation-is-skipping-the-bottom-surface-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-add-a-Fixture-Offset-in-a-FeatureCAM-Wire-EDM-document&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-add-a-Fixture-Offset-in-a-FeatureCAM-Wire-EDM-document" target="_blank" rel="noopener"&gt;How-to-add-a-Fixture-Offset-in-a-FeatureCAM-Wire-EDM-document&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error-TPD9999-Unknown-9999-with-turning-toolpath-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-TPD9999-Unknown-9999-with-turning-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error-TPD9999-Unknown-9999-with-turning-toolpath-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-the-setting-of-turning-2D-stock-into-3D-wireframe-stock-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-the-setting-of-turning-2D-stock-into-3D-wireframe-stock-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-change-the-setting-of-turning-2D-stock-into-3D-wireframe-stock-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Cutter-comp-code-is-missing-in-the-nc-program-although-it-was-turned-on-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cutter-comp-code-is-missing-in-the-nc-program-although-it-was-turned-on-in-FeatureCAM" target="_blank" rel="noopener"&gt;Cutter-comp-code-is-missing-in-the-nc-program-although-it-was-turned-on-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-set-a-bottom-finish-allowance-for-a-pocket-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-a-bottom-finish-allowance-for-a-pocket-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-set-a-bottom-finish-allowance-for-a-pocket-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-to-pick-the-points-while-creating-arc-and-while-checking-the-dimensions-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-pick-the-points-while-creating-arc-and-while-checking-the-dimensions-in-FeatureCAM" target="_blank" rel="noopener"&gt;Unable-to-pick-the-points-while-creating-arc-and-while-checking-the-dimensions-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Howto-reorder-text-curves-to-minimise-toolpath-links-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Howto-reorder-text-curves-to-minimise-toolpath-links-in-FeatureCAM" target="_blank" rel="noopener"&gt;Howto-reorder-text-curves-to-minimise-toolpath-links-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;October 2019&lt;/P&gt;
&lt;TABLE dir="ltr" style="width: 887px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="634" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 886px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Drill-is-facing-the-wrong-direction-and-wipes-out-the-part-when-doing-Machine-Simulation-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Drill-is-facing-the-wrong-direction-and-wipes-out-the-part-when-doing-Machine-Simulation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Drill-is-facing-the-wrong-direction-and-wipes-out-the-part-when-doing-Machine-Simulation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 886px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-to-select-Corner-Rounding-tool-for-Side-Feature-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-select-Corner-Rounding-tool-for-Side-Feature-in-FeatureCAM" target="_blank" rel="noopener"&gt;Unable-to-select-Corner-Rounding-tool-for-Side-Feature-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 886px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;3D-Simulation-has-lots-of-flats-in-FeatureCAM-Turnmill&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/3D-Simulation-has-lots-of-flats-in-FeatureCAM-Turnmill" target="_blank" rel="noopener"&gt;3D-Simulation-has-lots-of-flats-in-FeatureCAM-Turnmill&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 886px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Mill-Cylinder-toolpath-looks-choppy-in-simulation-but-is-correct-in-verification-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Mill-Cylinder-toolpath-looks-choppy-in-simulation-but-is-correct-in-verification-in-PartMaker" target="_blank" rel="noopener"&gt;Mill-Cylinder-toolpath-looks-choppy-in-simulation-but-is-correct-in-verification-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 886px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Recognising-features-from-odd-shaped-surfaces-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Recognising-features-from-odd-shaped-surfaces-in-FeatureCAM" target="_blank" rel="noopener"&gt;Recognising-features-from-odd-shaped-surfaces-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 886px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-slow-down-lead-in-feed-for-inside-outside-groove-finish-feature-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-slow-down-lead-in-feed-for-inside-outside-groove-finish-feature-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-slow-down-lead-in-feed-for-inside-outside-groove-finish-feature-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 886px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="743" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 884.8px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-deburr-a-crossdrilled-hole-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-deburr-a-crossdrilled-hole-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-deburr-a-crossdrilled-hole-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 884.8px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Impossible-to-open-FeatureCAM-after-a-language-change&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Impossible-to-open-FeatureCAM-after-a-language-change" target="_blank" rel="noopener"&gt;Impossible-to-open-FeatureCAM-after-a-language-change&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 884.8px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Different-tool-selection-between-FeatureCAM-2019-and-2020-version&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Different-tool-selection-between-FeatureCAM-2019-and-2020-version" target="_blank" rel="noopener"&gt;Different-tool-selection-between-FeatureCAM-2019-and-2020-version&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 884.8px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Rigid-tapping-cycle-is-spinning-in-the-wrong-direction-from-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Rigid-tapping-cycle-is-spinning-in-the-wrong-direction-from-FeatureCAM" target="_blank" rel="noopener"&gt;Rigid-tapping-cycle-is-spinning-in-the-wrong-direction-from-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 884.8px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Machining-attributes-are-not-saved-when-opening-a-new-FeatureCAM-document&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Machining-attributes-are-not-saved-when-opening-a-new-FeatureCAM-document" target="_blank" rel="noopener"&gt;Machining-attributes-are-not-saved-when-opening-a-new-FeatureCAM-document&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 884.8px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Geometry-is-being-drawn-in-the-wrong-place-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Geometry-is-being-drawn-in-the-wrong-place-in-FeatureCAM" target="_blank" rel="noopener"&gt;Geometry-is-being-drawn-in-the-wrong-place-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 884.8px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-deburr-a-3-axis-hole-using-a-lollipop-cutter-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-deburr-a-3-axis-hole-using-a-lollipop-cutter-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-deburr-a-3-axis-hole-using-a-lollipop-cutter-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 884.8px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Side-feature-does-not-finish-the-bottom-and-leaves-unmachined-areas-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Side-feature-does-not-finish-the-bottom-and-leaves-unmachined-areas-in-FeatureCAM" target="_blank" rel="noopener"&gt;Side-feature-does-not-finish-the-bottom-and-leaves-unmachined-areas-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 894px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="734" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 893px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Bore-finish-operation-gouges-the-front-of-the-part-when-using-small-clearance-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Bore-finish-operation-gouges-the-front-of-the-part-when-using-small-clearance-in-FeatureCAM" target="_blank" rel="noopener"&gt;Bore-finish-operation-gouges-the-front-of-the-part-when-using-small-clearance-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 893px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-Plunge-Broach-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-Plunge-Broach-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-Plunge-Broach-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="912" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Side-feature-starting-way-off-the-part-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Side-feature-starting-way-off-the-part-in-FeatureCAM" target="_blank" rel="noopener"&gt;Side-feature-starting-way-off-the-part-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-remove-retracts-from-PartMaker-Advanced-Milling-toolpath&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-remove-retracts-from-PartMaker-Advanced-Milling-toolpath" target="_blank" rel="noopener"&gt;How-to-remove-retracts-from-PartMaker-Advanced-Milling-toolpath&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Asking-for-login-ID-and-password-while-opening-FeatureCAM-PowerMill-PowerShape&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Asking-for-login-ID-and-password-while-opening-FeatureCAM-PowerMill-PowerShape" target="_blank" rel="noopener"&gt;Asking-for-login-ID-and-password-while-opening-FeatureCAM-PowerMill-PowerShape&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="939" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;3D-surface-milling-operations-are-missing-from-fm-file-from-another-users-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/3D-surface-milling-operations-are-missing-from-fm-file-from-another-users-FeatureCAM" target="_blank" rel="noopener"&gt;3D-surface-milling-operations-are-missing-from-fm-file-from-another-users-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Pocketing-a-thick-walled-tube-stock-produces-air-machining-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Pocketing-a-thick-walled-tube-stock-produces-air-machining-in-FeatureCAM" target="_blank" rel="noopener"&gt;Pocketing-a-thick-walled-tube-stock-produces-air-machining-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="954" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;All-tools-feeds-and-speeds-are-missing-from-the-Featurecam-tool-database-after-moving-it-to-a-new-location&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/All-tools-feeds-and-speeds-are-missing-from-the-Featurecam-tool-database-after-moving-it-to-a-new-location" target="_blank" rel="noopener"&gt;All-tools-feeds-and-speeds-are-missing-from-the-Featurecam-tool-database-after-moving-it-to-a-new-location&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-rounded-groove-feature-with-a-same-sized-ball-mill-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-rounded-groove-feature-with-a-same-sized-ball-mill-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-rounded-groove-feature-with-a-same-sized-ball-mill-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Rough-turn-toolpath-gouges-past-feature-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Rough-turn-toolpath-gouges-past-feature-in-FeatureCAM" target="_blank" rel="noopener"&gt;Rough-turn-toolpath-gouges-past-feature-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-back-turning-with-canned-cycle-using-back-turning-tool-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-back-turning-with-canned-cycle-using-back-turning-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-back-turning-with-canned-cycle-using-back-turning-tool-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;September 2019&lt;/P&gt;
&lt;TABLE dir="ltr" style="width: 888px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="833" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 887.2px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Material-gets-renamed-when-reopening-a-FeatureCAM-project&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Material-gets-renamed-when-reopening-a-FeatureCAM-project" target="_blank" rel="noopener"&gt;Material-gets-renamed-when-reopening-a-FeatureCAM-project&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 887.2px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Infinite-line-not-displayed-during-simulation-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Infinite-line-not-displayed-during-simulation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Infinite-line-not-displayed-during-simulation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 887.2px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-extract-a-curve-from-a-trimmed-surface-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-extract-a-curve-from-a-trimmed-surface-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-extract-a-curve-from-a-trimmed-surface-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 887.2px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Are-admin-rights-required-to-use-Add-ins-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Are-admin-rights-required-to-use-Add-ins-in-FeatureCAM" target="_blank" rel="noopener"&gt;Are-admin-rights-required-to-use-Add-ins-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 887.2px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Chamfer-machined-with-X-and-Y-motions-changes-for-Z-motions-without-any-reason-in-FetureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Chamfer-machined-with-X-and-Y-motions-changes-for-Z-motions-without-any-reason-in-FetureCAM" target="_blank" rel="noopener"&gt;Chamfer-machined-with-X-and-Y-motions-changes-for-Z-motions-without-any-reason-in-FetureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 887.2px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Toolpath-rapid-links-are-missing-while-simulating-centerline-simulation-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Toolpath-rapid-links-are-missing-while-simulating-centerline-simulation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Toolpath-rapid-links-are-missing-while-simulating-centerline-simulation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 887.2px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Inside-outside-groove-machines-wider-than-expected-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Inside-outside-groove-machines-wider-than-expected-in-FeatureCAM" target="_blank" rel="noopener"&gt;Inside-outside-groove-machines-wider-than-expected-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 887.2px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Turning-tool-retracts-through-the-component-on-the-sub-spindle-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Turning-tool-retracts-through-the-component-on-the-sub-spindle-in-FeatureCAM" target="_blank" rel="noopener"&gt;Turning-tool-retracts-through-the-component-on-the-sub-spindle-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="896" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Pin-number-for-post-processors-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Pin-number-for-post-processors-in-PartMaker" target="_blank" rel="noopener"&gt;Pin-number-for-post-processors-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-find-3-axis-Mill-and-2-axis-Turn-post-processors-shipped-with-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-find-3-axis-Mill-and-2-axis-Turn-post-processors-shipped-with-PartMaker" target="_blank" rel="noopener"&gt;How-to-find-3-axis-Mill-and-2-axis-Turn-post-processors-shipped-with-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="896" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Keyboard-shortcuts-gone-missing-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Keyboard-shortcuts-gone-missing-in-FeatureCAM" target="_blank" rel="noopener"&gt;Keyboard-shortcuts-gone-missing-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-drill-one-hole-then-index-the-chuck-to-next-position-on-a-Turn-MILL-machining-centre-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-drill-one-hole-then-index-the-chuck-to-next-position-on-a-Turn-MILL-machining-centre-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-drill-one-hole-then-index-the-chuck-to-next-position-on-a-Turn-MILL-machining-centre-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;B-axis-output-is-missing-when-stock-is-defined-as-a-cylinder-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/B-axis-output-is-missing-when-stock-is-defined-as-a-cylinder-in-FeatureCAM" target="_blank" rel="noopener"&gt;B-axis-output-is-missing-when-stock-is-defined-as-a-cylinder-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-setup-normal-to-a-surface&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-setup-normal-to-a-surface" target="_blank" rel="noopener"&gt;How-to-create-a-setup-normal-to-a-surface&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;VortexMilling-Calculator-Add-ins-giving-message-macro-run-time-error-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/VortexMilling-Calculator-Add-ins-giving-message-macro-run-time-error-in-FeatureCAM" target="_blank" rel="noopener"&gt;VortexMilling-Calculator-Add-ins-giving-message-macro-run-time-error-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Output-feedrate-is-too-slow-from-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Output-feedrate-is-too-slow-from-FeatureCAM" target="_blank" rel="noopener"&gt;Output-feedrate-is-too-slow-from-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Holes-are-displayed-faceted-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Holes-are-displayed-faceted-in-FeatureCAM" target="_blank" rel="noopener"&gt;Holes-are-displayed-faceted-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Circles-show-up-as-squares-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Circles-show-up-as-squares-in-FeatureCAM" target="_blank" rel="noopener"&gt;Circles-show-up-as-squares-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Create-a-toolpath-similar-to-a-PowerMill-pattern-toolpath-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Create-a-toolpath-similar-to-a-PowerMill-pattern-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;Create-a-toolpath-similar-to-a-PowerMill-pattern-toolpath-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;August 2019&lt;/P&gt;
&lt;TABLE dir="ltr" style="height: 104px; width: 872px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="617" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR style="height: 44px;"&gt;
&lt;TD style="height: 44px; width: 871px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-is-the-Through-Hole-checkbox-used-in-a-PartMaker-drilling-process&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-is-the-Through-Hole-checkbox-used-in-a-PartMaker-drilling-process" target="_blank" rel="noopener"&gt;How-is-the-Through-Hole-checkbox-used-in-a-PartMaker-drilling-process&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR style="height: 30px;"&gt;
&lt;TD style="height: 30px; width: 871px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;PartMaker-posting-out-different-Z-value-than-specified-in-toolpath&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PartMaker-posting-out-different-Z-value-than-specified-in-toolpath" target="_blank" rel="noopener"&gt;PartMaker-posting-out-different-Z-value-than-specified-in-toolpath&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR style="height: 30px;"&gt;
&lt;TD style="height: 30px; width: 871px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-generate-a-Setup-Sheet-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-generate-a-Setup-Sheet-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-generate-a-Setup-Sheet-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 871px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="644" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 870px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Feeds-and-speeds-are-too-high-in-NC-code-from-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Feeds-and-speeds-are-too-high-in-NC-code-from-FeatureCAM" target="_blank" rel="noopener"&gt;Feeds-and-speeds-are-too-high-in-NC-code-from-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 870px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-linearize-arcs-for-any-Feature-type-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-linearize-arcs-for-any-Feature-type-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-linearize-arcs-for-any-Feature-type-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 870px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Arc-errors-on-the-machine-tool-when-turning-radius-on-stepped-shaft-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Arc-errors-on-the-machine-tool-when-turning-radius-on-stepped-shaft-in-FeatureCAM" target="_blank" rel="noopener"&gt;Arc-errors-on-the-machine-tool-when-turning-radius-on-stepped-shaft-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 870px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-generate-a-Setup-Sheet-in-PartMaker&amp;quot;}"&gt;&amp;nbsp;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 870px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-four-axis-toolpath-using-Swarf-finish-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-four-axis-toolpath-using-Swarf-finish-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-four-axis-toolpath-using-Swarf-finish-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-do-a-material-pull-using-the-Sub-Spindle-in-Partmaker-Swiss&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:0,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:[null,2,353217],&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-do-a-material-pull-using-the-Sub-Spindle-in-Partmaker-Swiss" target="_blank" rel="noopener"&gt;How-to-do-a-material-pull-using-the-Sub-Spindle-in-Partmaker-Swiss&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;July 2019&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="868" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-cap-surface-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-cap-surface-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-cap-surface-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-avoid-retract-between-2-adjacent-surfaces-when-isoline-surface-milling-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-avoid-retract-between-2-adjacent-surfaces-when-isoline-surface-milling-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-avoid-retract-between-2-adjacent-surfaces-when-isoline-surface-milling-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;1603-code-installation-incomplete-Some-products-failed-to-install-when-installing-FeatureCAM-2020&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/1603-code-installation-incomplete-Some-products-failed-to-install-when-installing-FeatureCAM-2020" target="_blank" rel="noopener"&gt;1603-code-installation-incomplete-Some-products-failed-to-install-when-installing-FeatureCAM-2020&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-is-very-slow-with-every-single-click&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-is-very-slow-with-every-single-click" target="_blank" rel="noopener"&gt;FeatureCAM-is-very-slow-with-every-single-click&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Feedrate-that-is-set-with-override-in-FeatureCAM-is-different-in-posted-NC-code&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Feedrate-that-is-set-with-override-in-FeatureCAM-is-different-in-posted-NC-code" target="_blank" rel="noopener"&gt;Feedrate-that-is-set-with-override-in-FeatureCAM-is-different-in-posted-NC-code&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-outputting-N0-for-N-sequence-numbers&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-outputting-N0-for-N-sequence-numbers" target="_blank" rel="noopener"&gt;FeatureCAM-outputting-N0-for-N-sequence-numbers&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Wrapped-features-will-not-simulate-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Wrapped-features-will-not-simulate-in-FeatureCAM" target="_blank" rel="noopener"&gt;Wrapped-features-will-not-simulate-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Between-two-curves-toolpath-will-not-machine-below-cetreline-of-the-component-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Between-two-curves-toolpath-will-not-machine-below-cetreline-of-the-component-in-FeatureCAM" target="_blank" rel="noopener"&gt;Between-two-curves-toolpath-will-not-machine-below-cetreline-of-the-component-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-setup-a-5-axis-program-that-uses-a-Pivot-Point-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-setup-a-5-axis-program-that-uses-a-Pivot-Point-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-setup-a-5-axis-program-that-uses-a-Pivot-Point-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Network-license-fails-to-open-FeatureCAM-2020&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Network-license-fails-to-open-FeatureCAM-2020" target="_blank" rel="noopener"&gt;Network-license-fails-to-open-FeatureCAM-2020&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 882px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="639" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 881px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-set-Output-units-for-postprocessor-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-Output-units-for-postprocessor-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-set-Output-units-for-postprocessor-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 881px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Posted-output-will-not-run-on-the-machine-from-FeatureCAM-2020&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Posted-output-will-not-run-on-the-machine-from-FeatureCAM-2020" target="_blank" rel="noopener"&gt;Posted-output-will-not-run-on-the-machine-from-FeatureCAM-2020&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 881px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Multiple-fixture-document-with-a-single-datum-but-only-one-component-machined-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Multiple-fixture-document-with-a-single-datum-but-only-one-component-machined-in-FeatureCAM" target="_blank" rel="noopener"&gt;Multiple-fixture-document-with-a-single-datum-but-only-one-component-machined-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 881px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Geometry-maintains-associativity-after-clipping-segments-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Geometry-maintains-associativity-after-clipping-segments-in-FeatureCAM" target="_blank" rel="noopener"&gt;Geometry-maintains-associativity-after-clipping-segments-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 881px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-take-backup-of-customized-user-settings-for-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-take-backup-of-customized-user-settings-for-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-take-backup-of-customized-user-settings-for-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 881px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;No-geometry-shows-after-importing-a-DXF-file-into-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/No-geometry-shows-after-importing-a-DXF-file-into-FeatureCAM" target="_blank" rel="noopener"&gt;No-geometry-shows-after-importing-a-DXF-file-into-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 881px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-mill-a-groove-on-the-OD-of-a-cylinder-like-a-thread-using-4th-axis-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-mill-a-groove-on-the-OD-of-a-cylinder-like-a-thread-using-4th-axis-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-mill-a-groove-on-the-OD-of-a-cylinder-like-a-thread-using-4th-axis-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-tilt-a-turning-tool-on-the-B-Axis-in-FeatureCAM&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:0,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:[null,2,353217],&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-tilt-a-turning-tool-on-the-B-Axis-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-tilt-a-turning-tool-on-the-B-Axis-in-FeatureCAM&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" style="width: 880px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="641" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Minimise-tool-lifts-by-following-component-form-or-shape&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Minimise-tool-lifts-by-following-component-form-or-shape" target="_blank" rel="noopener"&gt;Minimise-tool-lifts-by-following-component-form-or-shape&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Copying-features-from-one-setup-to-another-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Copying-features-from-one-setup-to-another-in-FeatureCAM" target="_blank" rel="noopener"&gt;Copying-features-from-one-setup-to-another-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Wireframe-and-model-geometry-radii-appear-linearized-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Wireframe-and-model-geometry-radii-appear-linearized-in-FeatureCAM" target="_blank" rel="noopener"&gt;Wireframe-and-model-geometry-radii-appear-linearized-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;ID-Groove-tool-not-following-defined-toolpath-in-a-contouring-strategy-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/ID-Groove-tool-not-following-defined-toolpath-in-a-contouring-strategy-in-PartMaker" target="_blank" rel="noopener"&gt;ID-Groove-tool-not-following-defined-toolpath-in-a-contouring-strategy-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Where-are-the-installers-for-the-latest-versions-of-the-AMDEU-and-the-AMPPU-located&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Where-are-the-installers-for-the-latest-versions-of-the-AMDEU-and-the-AMPPU-located" target="_blank" rel="noopener"&gt;Where-are-the-installers-for-the-latest-versions-of-the-AMDEU-and-the-AMPPU-located&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-bring-back-missing-FeatureCAM-shortcut-icon-on-the-desktop&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-bring-back-missing-FeatureCAM-shortcut-icon-on-the-desktop" target="_blank" rel="noopener"&gt;How-to-bring-back-missing-FeatureCAM-shortcut-icon-on-the-desktop&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;3D-Simulation-results-very-poor-when-compared-to-centreline-simulation-in-FeatureCam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/3D-Simulation-results-very-poor-when-compared-to-centreline-simulation-in-FeatureCam" target="_blank" rel="noopener"&gt;3D-Simulation-results-very-poor-when-compared-to-centreline-simulation-in-FeatureCam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 879px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Toolpath-in-turn-window-gouging-the-part-when-roughing-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Toolpath-in-turn-window-gouging-the-part-when-roughing-in-PartMaker" target="_blank" rel="noopener"&gt;Toolpath-in-turn-window-gouging-the-part-when-roughing-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 875px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="759" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 873.6px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-wrapped-toolpath-that-uses-the-C-axis-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-wrapped-toolpath-that-uses-the-C-axis-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-create-a-wrapped-toolpath-that-uses-the-C-axis-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 873.6px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;illegible-engraving-when-wrapped-around-a-cylinder-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/illegible-engraving-when-wrapped-around-a-cylinder-in-FeatureCAM" target="_blank" rel="noopener"&gt;illegible-engraving-when-wrapped-around-a-cylinder-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 873.6px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Remachining-failing-to-detect-remaining-material-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Remachining-failing-to-detect-remaining-material-in-FeatureCAM" target="_blank" rel="noopener"&gt;Remachining-failing-to-detect-remaining-material-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 873.6px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-add-toolpath-points-to-a-PartMaker-Advanced-Contour-Mill-operation&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-add-toolpath-points-to-a-PartMaker-Advanced-Contour-Mill-operation" target="_blank" rel="noopener"&gt;How-to-add-toolpath-points-to-a-PartMaker-Advanced-Contour-Mill-operation&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 901px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="685" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 900px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-adjust-column-widths-in-the-operation-list-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-adjust-column-widths-in-the-operation-list-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-adjust-column-widths-in-the-operation-list-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 900px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-modify-the-4th-axis-Feed-limit-in-Featurecam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-modify-the-4th-axis-Feed-limit-in-Featurecam" target="_blank" rel="noopener"&gt;How-to-modify-the-4th-axis-Feed-limit-in-Featurecam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 900px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Custom-tabs-are-missing-from-the-ribbon-since-upgrade-to-FeatureCam-2020&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Custom-tabs-are-missing-from-the-ribbon-since-upgrade-to-FeatureCam-2020" target="_blank" rel="noopener"&gt;Custom-tabs-are-missing-from-the-ribbon-since-upgrade-to-FeatureCam-2020&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 900px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;No-toolpath-when-simulating-a-face-groove-feature-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/No-toolpath-when-simulating-a-face-groove-feature-in-FeatureCAM" target="_blank" rel="noopener"&gt;No-toolpath-when-simulating-a-face-groove-feature-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 900px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;No-X-or-Z-values-in-NC-output-from-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/No-X-or-Z-values-in-NC-output-from-FeatureCAM" target="_blank" rel="noopener"&gt;No-X-or-Z-values-in-NC-output-from-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 900px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Manufacturing-Data-Exchange-Utility-Premium-2020-does-not-use-PowerShape-Standard-2020-single-user-license&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Manufacturing-Data-Exchange-Utility-Premium-2020-does-not-use-PowerShape-Standard-2020-single-user-license" target="_blank" rel="noopener"&gt;Manufacturing-Data-Exchange-Utility-Premium-2020-does-not-use-PowerShape-Standard-2020-single-user-license&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;June 2019&lt;/P&gt;
&lt;TABLE dir="ltr" style="width: 893px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="758" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 892px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-axial-stepdown-from-a-rapid-to-a-feed-on-a-Contour-Mill-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-axial-stepdown-from-a-rapid-to-a-feed-on-a-Contour-Mill-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-change-axial-stepdown-from-a-rapid-to-a-feed-on-a-Contour-Mill-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 892px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-save-a-new-tool-change-location-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-save-a-new-tool-change-location-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-save-a-new-tool-change-location-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 892px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-reduce-the-load-on-a-smaller-tool-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-reduce-the-load-on-a-smaller-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-reduce-the-load-on-a-smaller-tool-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 892px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Too-many-files-are-being-saved-when-saving-NC-code-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Too-many-files-are-being-saved-when-saving-NC-code-in-FeatureCAM" target="_blank" rel="noopener"&gt;Too-many-files-are-being-saved-when-saving-NC-code-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 892px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-to-create-wrapped-toolpaths-The-following-features-are-incorrectly-positioned-when-running-a-toolpath-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-create-wrapped-toolpaths-The-following-features-are-incorrectly-positioned-when-running-a-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;Unable-to-create-wrapped-toolpaths-The-following-features-are-incorrectly-positioned-when-running-a-toolpath-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 893px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="809" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 892px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;B-axis-going-to-the-wrong-side-of-sub-spindle-in-PartMaker-Full-Machine-Simulation&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/B-axis-going-to-the-wrong-side-of-sub-spindle-in-PartMaker-Full-Machine-Simulation" target="_blank" rel="noopener"&gt;B-axis-going-to-the-wrong-side-of-sub-spindle-in-PartMaker-Full-Machine-Simulation&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 892px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Tool-is-not-using-rapid-movements-to-step-over-in-side-feature-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Tool-is-not-using-rapid-movements-to-step-over-in-side-feature-in-FeatureCAM" target="_blank" rel="noopener"&gt;Tool-is-not-using-rapid-movements-to-step-over-in-side-feature-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-plunge-milling-toolpath-that-follows-a-curve-in-FeatureCAM&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:0,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:353217},&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-plunge-milling-toolpath-that-follows-a-curve-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-plunge-milling-toolpath-that-follows-a-curve-in-FeatureCAM&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-plunge-milling-toolpath-that-follows-a-curve-in-FeatureCAM&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:0,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:353217},&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-recognise-features-around-the-index-axis-using-Interactive-Feature-Recognition-in-FeatureCAMs-TurnMILL" target="_blank" rel="noopener"&gt;How-to-recognise-features-around-the-index-axis-using-Interactive-Feature-Recognition-in-FeatureCAMs-TurnMILL&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Oversized-parts-not-nested-on-the-assigned-sheet-in-CAMduct&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:0,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:[null,2,353217],&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Oversized-parts-not-nested-on-the-assigned-sheet-in-CAMduct" target="_blank" rel="noopener"&gt;Oversized-parts-not-nested-on-the-assigned-sheet-in-CAMduct&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Oversized-parts-not-nested-on-the-assigned-sheet-in-CAMduct&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:0,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:[null,2,353217],&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Is-there-a-Tolerance-setting-for-the-Mill-Cylinder-Face-Window-in-PartMaker" target="_blank" rel="noopener"&gt;Is-there-a-Tolerance-setting-for-the-Mill-Cylinder-Face-Window-in-PartMaker&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="910" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Is-FeatureCAM-able-to-support-a-trunnion-or-indexer-with-two-rotary-axis-on-top-of-one-tilting-axis&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Is-FeatureCAM-able-to-support-a-trunnion-or-indexer-with-two-rotary-axis-on-top-of-one-tilting-axis" target="_blank" rel="noopener"&gt;Is-FeatureCAM-able-to-support-a-trunnion-or-indexer-with-two-rotary-axis-on-top-of-one-tilting-axis&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-4th-axis-setup-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-4th-axis-setup-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-4th-axis-setup-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-add-cutter-comp-to-a-turning-tool-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-add-cutter-comp-to-a-turning-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-add-cutter-comp-to-a-turning-tool-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;4-axis-3D-Simulation-does-not-rotate-as-expected-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/4-axis-3D-Simulation-does-not-rotate-as-expected-in-FeatureCAM" target="_blank" rel="noopener"&gt;4-axis-3D-Simulation-does-not-rotate-as-expected-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Wrong-units-are-shown-when-a-DXF-file-is-imported-into-PowerMill&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Wrong-units-are-shown-when-a-DXF-file-is-imported-into-PowerMill" target="_blank" rel="noopener"&gt;Wrong-units-are-shown-when-a-DXF-file-is-imported-into-PowerMill&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;May 2019&lt;/P&gt;
&lt;TABLE dir="ltr" style="width: 771px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="658" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;4th-axis-surface-milled-part-cutting-fresh-air-on-second-setup&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/4th-axis-surface-milled-part-cutting-fresh-air-on-second-setup" target="_blank" rel="noopener"&gt;4th-axis-surface-milled-part-cutting-fresh-air-on-second-setup&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error-The-block-is-either-not-defined-or-it-has-inappropriate-values-when-3D-milling-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-The-block-is-either-not-defined-or-it-has-inappropriate-values-when-3D-milling-in-PartMaker" target="_blank" rel="noopener"&gt;Error-The-block-is-either-not-defined-or-it-has-inappropriate-values-when-3D-milling-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;System-requirements-for-Autodesk-FeatureCAM-2020&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/System-requirements-for-Autodesk-FeatureCAM-2020" target="_blank" rel="noopener"&gt;System-requirements-for-Autodesk-FeatureCAM-2020&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Tool-library-not-accessible-after-connecting-to-MS-Access-Database-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Tool-library-not-accessible-after-connecting-to-MS-Access-Database-in-FeatureCAM" target="_blank" rel="noopener"&gt;Tool-library-not-accessible-after-connecting-to-MS-Access-Database-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;PartMaker-is-not-posting-program-end-codes-when-Sub-Spindle-process-is-selected&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PartMaker-is-not-posting-program-end-codes-when-Sub-Spindle-process-is-selected" target="_blank" rel="noopener"&gt;PartMaker-is-not-posting-program-end-codes-when-Sub-Spindle-process-is-selected&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Can-t-unwrap-curve-around-index-axis-properly-to-create-wrapped-groove-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-t-unwrap-curve-around-index-axis-properly-to-create-wrapped-groove-in-FeatureCAM" target="_blank" rel="noopener"&gt;Can-t-unwrap-curve-around-index-axis-properly-to-create-wrapped-groove-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Feature-recognition-creates-the-chamfer-in-the-wrong-position-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Feature-recognition-creates-the-chamfer-in-the-wrong-position-in-FeatureCAM" target="_blank" rel="noopener"&gt;Feature-recognition-creates-the-chamfer-in-the-wrong-position-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Surface-mill-feature-fails-to-be-added-to-a-part-library-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Surface-mill-feature-fails-to-be-added-to-a-part-library-in-FeatureCAM" target="_blank" rel="noopener"&gt;Surface-mill-feature-fails-to-be-added-to-a-part-library-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Can-the-facing-operation-be-an-irregular-shape-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-the-facing-operation-be-an-irregular-shape-in-FeatureCAM" target="_blank" rel="noopener"&gt;Can-the-facing-operation-be-an-irregular-shape-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Selecting-right-hand-thread-in-FeatureCAM-is-not-changing-M3-M4-in-NC-code&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Selecting-right-hand-thread-in-FeatureCAM-is-not-changing-M3-M4-in-NC-code" target="_blank" rel="noopener"&gt;Selecting-right-hand-thread-in-FeatureCAM-is-not-changing-M3-M4-in-NC-code&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Stick-tools-are-not-retracting-in-Z-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Stick-tools-are-not-retracting-in-Z-in-PartMaker" target="_blank" rel="noopener"&gt;Stick-tools-are-not-retracting-in-Z-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Side-Feature-with-multiple-curves-is-not-lifting-in-Z-when-moving-from-one-curve-to-the-other&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Side-Feature-with-multiple-curves-is-not-lifting-in-Z-when-moving-from-one-curve-to-the-other" target="_blank" rel="noopener"&gt;Side-Feature-with-multiple-curves-is-not-lifting-in-Z-when-moving-from-one-curve-to-the-other&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 769.778px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-the-angle-of-a-face-milling-toolpath-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-the-angle-of-a-face-milling-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-change-the-angle-of-a-face-milling-toolpath-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 775px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="688" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 773.333px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Geometry-not-rendering-correctly-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Geometry-not-rendering-correctly-in-FeatureCAM" target="_blank" rel="noopener"&gt;Geometry-not-rendering-correctly-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 773.333px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Directed-Automatic-Feature-Recognition-selecting-holes-smaller-than-required-size-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Directed-Automatic-Feature-Recognition-selecting-holes-smaller-than-required-size-in-FeatureCAM" target="_blank" rel="noopener"&gt;Directed-Automatic-Feature-Recognition-selecting-holes-smaller-than-required-size-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 773.333px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Side-groove-operation-with-multiple-radial-passes-lifts-in-Z-between-passes&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Side-groove-operation-with-multiple-radial-passes-lifts-in-Z-between-passes" target="_blank" rel="noopener"&gt;Side-groove-operation-with-multiple-radial-passes-lifts-in-Z-between-passes&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 773.333px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Should-Global-Coordinates-or-Local-Coordinates-be-used-for-B-axis-output-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Should-Global-Coordinates-or-Local-Coordinates-be-used-for-B-axis-output-in-PartMaker" target="_blank" rel="noopener"&gt;Should-Global-Coordinates-or-Local-Coordinates-be-used-for-B-axis-output-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 773.333px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Are-updated-PartMaker-Material-Databases-available-for-download&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Are-updated-PartMaker-Material-Databases-available-for-download" target="_blank" rel="noopener"&gt;Are-updated-PartMaker-Material-Databases-available-for-download&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 773.333px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-Fixed-Angle-milling-operation-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-Fixed-Angle-milling-operation-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-create-a-Fixed-Angle-milling-operation-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 767px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="641" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Simulation-does-not-show-wire-compensation-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Simulation-does-not-show-wire-compensation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Simulation-does-not-show-wire-compensation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Feature-properties-window-not-showing-on-screen-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Feature-properties-window-not-showing-on-screen-in-FeatureCAM" target="_blank" rel="noopener"&gt;Feature-properties-window-not-showing-on-screen-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error-Problem-Running-Simulation-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Problem-Running-Simulation-in-PartMaker" target="_blank" rel="noopener"&gt;Error-Problem-Running-Simulation-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-post-code-for-a-group-of-setups-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-post-code-for-a-group-of-setups-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-post-code-for-a-group-of-setups-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Can-a-list-of-all-tools-in-the-tools-file-be-output-into-a-PartMaker-setup-sheet&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-a-list-of-all-tools-in-the-tools-file-be-output-into-a-PartMaker-setup-sheet" target="_blank" rel="noopener"&gt;Can-a-list-of-all-tools-in-the-tools-file-be-output-into-a-PartMaker-setup-sheet&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-new-setup-using-a-shortcut-key-when-the-FeatureCAM-ribbon-is-closed&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-new-setup-using-a-shortcut-key-when-the-FeatureCAM-ribbon-is-closed" target="_blank" rel="noopener"&gt;How-to-create-a-new-setup-using-a-shortcut-key-when-the-FeatureCAM-ribbon-is-closed&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-rough-mill-in-PartMaker-in-multiple-radial-passes-without-air-cutting&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-rough-mill-in-PartMaker-in-multiple-radial-passes-without-air-cutting" target="_blank" rel="noopener"&gt;How-to-rough-mill-in-PartMaker-in-multiple-radial-passes-without-air-cutting&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Toolpath-retract-moves-overtraveling-machine&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Toolpath-retract-moves-overtraveling-machine" target="_blank" rel="noopener"&gt;Toolpath-retract-moves-overtraveling-machine&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 765.556px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Can-a-User-Defined-tool-be-made-from-a-solid-model-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-a-User-Defined-tool-be-made-from-a-solid-model-in-PartMaker" target="_blank" rel="noopener"&gt;Can-a-User-Defined-tool-be-made-from-a-solid-model-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" style="width: 762px;" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="640" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD style="width: 760px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Side-feature-from-curve-causing-arc-errors-in-NC-code-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Side-feature-from-curve-causing-arc-errors-in-NC-code-in-FeatureCAM" target="_blank" rel="noopener"&gt;Side-feature-from-curve-causing-arc-errors-in-NC-code-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 760px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Sub-Spindle-tools-do-not-touch-part-when-simulating-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Sub-Spindle-tools-do-not-touch-part-when-simulating-in-PartMaker" target="_blank" rel="noopener"&gt;Sub-Spindle-tools-do-not-touch-part-when-simulating-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 760px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Offset-curve-not-maintaining-smoothness-between-points-in-PowerSHAPE&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Offset-curve-not-maintaining-smoothness-between-points-in-PowerSHAPE" target="_blank" rel="noopener"&gt;Offset-curve-not-maintaining-smoothness-between-points-in-PowerSHAPE&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD style="width: 760px;" data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-the-plunge-feed-on-Thread-Milling-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-the-plunge-feed-on-Thread-Milling-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-change-the-plunge-feed-on-Thread-Milling-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="762" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Create-a-tapered-thread-using-G76-cycle-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Create-a-tapered-thread-using-G76-cycle-in-FeatureCAM" target="_blank" rel="noopener"&gt;Create-a-tapered-thread-using-G76-cycle-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-minimise-the-machining-area-when-profiling-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-minimise-the-machining-area-when-profiling-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-minimise-the-machining-area-when-profiling-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-copy-default-setting-from-one-PC-to-another-PC-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-copy-default-setting-from-one-PC-to-another-PC-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-copy-default-setting-from-one-PC-to-another-PC-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Create-serrations-around-a-turned-part-using-a-form-tool-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Create-serrations-around-a-turned-part-using-a-form-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;Create-serrations-around-a-turned-part-using-a-form-tool-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Part-compare-is-showing-false-excess-material-results-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Part-compare-is-showing-false-excess-material-results-in-FeatureCAM" target="_blank" rel="noopener"&gt;Part-compare-is-showing-false-excess-material-results-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-multiple-depth-cuts-with-PartMaker-Surfacing-toolpaths&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-multiple-depth-cuts-with-PartMaker-Surfacing-toolpaths" target="_blank" rel="noopener"&gt;How-to-create-multiple-depth-cuts-with-PartMaker-Surfacing-toolpaths&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-outputting-code-that-says-Linear-Circular-and-Rapid-throughout-the-program&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-outputting-code-that-says-Linear-Circular-and-Rapid-throughout-the-program" target="_blank" rel="noopener"&gt;FeatureCAM-outputting-code-that-says-Linear-Circular-and-Rapid-throughout-the-program&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Machine-over-travel-in-Z-in-FeatureCAM-5-axis-toolpath&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Machine-over-travel-in-Z-in-FeatureCAM-5-axis-toolpath" target="_blank" rel="noopener"&gt;Machine-over-travel-in-Z-in-FeatureCAM-5-axis-toolpath&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-do-I-machine-the-top-of-a-plate-in-PowerMILL&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-do-I-machine-the-top-of-a-plate-in-PowerMILL" target="_blank" rel="noopener"&gt;How-do-I-machine-the-top-of-a-plate-in-PowerMILL&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-to-install-updated-software-version-for-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-install-updated-software-version-for-FeatureCAM" target="_blank" rel="noopener"&gt;Unable-to-install-updated-software-version-for-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error-Error-loading-post-processor-file-when-selecting-a-post-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Error-loading-post-processor-file-when-selecting-a-post-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error-Error-loading-post-processor-file-when-selecting-a-post-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;April 2019&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="822" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-revert-from-the-ribbon-UI-to-the-toolbar-UI-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-revert-from-the-ribbon-UI-to-the-toolbar-UI-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-revert-from-the-ribbon-UI-to-the-toolbar-UI-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-fix-4K-resolution-display-issue-for-PowerMill-PowerShape-PowerInspect-and-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-fix-4K-resolution-display-issue-for-PowerMill-PowerShape-PowerInspect-and-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-fix-4K-resolution-display-issue-for-PowerMill-PowerShape-PowerInspect-and-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-switch-between-G76-G92-and-G32-threading-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-switch-between-G76-G92-and-G32-threading-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-switch-between-G76-G92-and-G32-threading-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;No-material-sticking-out-of-Main-Spindle-in-PartMaker-TurnMill-Simulation&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/No-material-sticking-out-of-Main-Spindle-in-PartMaker-TurnMill-Simulation" target="_blank" rel="noopener"&gt;No-material-sticking-out-of-Main-Spindle-in-PartMaker-TurnMill-Simulation&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error-TDP01-Unkown-1-with-a-groove-operation-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-TDP01-Unkown-1-with-a-groove-operation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error-TDP01-Unkown-1-with-a-groove-operation-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error-Cannot-load-the-tools-and-materials-database-in-directory-in-FeatureCAM-when-opening-an-old-program&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Cannot-load-the-tools-and-materials-database-in-directory-in-FeatureCAM-when-opening-an-old-program" target="_blank" rel="noopener"&gt;Error-Cannot-load-the-tools-and-materials-database-in-directory-in-FeatureCAM-when-opening-an-old-program&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="771" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;The-location-of-the-text-curve-changes-when-accessing-its-properties-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-location-of-the-text-curve-changes-when-accessing-its-properties-in-FeatureCAM" target="_blank" rel="noopener"&gt;The-location-of-the-text-curve-changes-when-accessing-its-properties-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-improve-quality-of-STL-export-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-improve-quality-of-STL-export-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-improve-quality-of-STL-export-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Cannot-find-Resaveallfiles-bas-file-in-FeatureCAM-2019-addins&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cannot-find-Resaveallfiles-bas-file-in-FeatureCAM-2019-addins" target="_blank" rel="noopener"&gt;Cannot-find-Resaveallfiles-bas-file-in-FeatureCAM-2019-addins&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-machine-spiral-flutes-with-a-4-axis-toolpath-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-machine-spiral-flutes-with-a-4-axis-toolpath-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-machine-spiral-flutes-with-a-4-axis-toolpath-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-Outputting-Canned-Cycles-for-Patterned-Hole-Features&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-Outputting-Canned-Cycles-for-Patterned-Hole-Features" target="_blank" rel="noopener"&gt;FeatureCAM-Outputting-Canned-Cycles-for-Patterned-Hole-Features&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-set-up-a-workgroup-machining-configuration-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-up-a-workgroup-machining-configuration-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-set-up-a-workgroup-machining-configuration-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Machine-text-looks-odd-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Machine-text-looks-odd-in-FeatureCAM" target="_blank" rel="noopener"&gt;Machine-text-looks-odd-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Use-simulation-as-starting-point-greyed-out-in-FeatureCAM2019&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Use-simulation-as-starting-point-greyed-out-in-FeatureCAM2019" target="_blank" rel="noopener"&gt;Use-simulation-as-starting-point-greyed-out-in-FeatureCAM2019&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-set-Index-Axis-Limit-in-a-5-axis-project-in-FeatureCAM&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:0,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:353217},&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-Index-Axis-Limit-in-a-5-axis-project-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-set-Index-Axis-Limit-in-a-5-axis-project-in-FeatureCAM&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="759" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Item-Hole-appears-in-incorrect-position-in-CAMduct&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Item-Hole-appears-in-incorrect-position-in-CAMduct" target="_blank" rel="noopener"&gt;Item-Hole-appears-in-incorrect-position-in-CAMduct&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-drilling-toolpath-with-IFR-hole-recognition-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-drilling-toolpath-with-IFR-hole-recognition-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-drilling-toolpath-with-IFR-hole-recognition-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Simulation-is-slow-and-lagging-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Simulation-is-slow-and-lagging-in-PartMaker" target="_blank" rel="noopener"&gt;Simulation-is-slow-and-lagging-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-pull-stock-in-a-turning-project-using-sub-spindle-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-pull-stock-in-a-turning-project-using-sub-spindle-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-pull-stock-in-a-turning-project-using-sub-spindle-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;location-of-tool-and-material-databases-in-featurecam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/location-of-tool-and-material-databases-in-featurecam" target="_blank" rel="noopener"&gt;location-of-tool-and-material-databases-in-featurecam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Using-a-setup-to-establish-your-touch-off-point-for-5-axis-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Using-a-setup-to-establish-your-touch-off-point-for-5-axis-in-FeatureCAM" target="_blank" rel="noopener"&gt;Using-a-setup-to-establish-your-touch-off-point-for-5-axis-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-the-orentation-angle-of-a-lathe-tool-insert-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-the-orentation-angle-of-a-lathe-tool-insert-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-change-the-orentation-angle-of-a-lathe-tool-insert-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Can-PartMaker-Normal-To-Faceplane-be-changed-to-make-X-face-up-instead-of-to-the-right&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-PartMaker-Normal-To-Faceplane-be-changed-to-make-X-face-up-instead-of-to-the-right" target="_blank" rel="noopener"&gt;Can-PartMaker-Normal-To-Faceplane-be-changed-to-make-X-face-up-instead-of-to-the-right&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;March 2019&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="733" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-custom-form-tool-from-curve-is-not-coming-out-the-correct-diameter&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-custom-form-tool-from-curve-is-not-coming-out-the-correct-diameter" target="_blank" rel="noopener"&gt;FeatureCAM-custom-form-tool-from-curve-is-not-coming-out-the-correct-diameter&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Cannot-run-PartMaker-2018-and-FeatureCAM-2019-on-a-single-borrowed-license&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cannot-run-PartMaker-2018-and-FeatureCAM-2019-on-a-single-borrowed-license" target="_blank" rel="noopener"&gt;Cannot-run-PartMaker-2018-and-FeatureCAM-2019-on-a-single-borrowed-license&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;PartMaker-Mill-Cylinder-toolpath-produces-results-that-do-not-match-the-model&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PartMaker-Mill-Cylinder-toolpath-produces-results-that-do-not-match-the-model" target="_blank" rel="noopener"&gt;PartMaker-Mill-Cylinder-toolpath-produces-results-that-do-not-match-the-model&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Side-feature-not-ramping-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Side-feature-not-ramping-in-FeatureCAM" target="_blank" rel="noopener"&gt;Side-feature-not-ramping-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-only-detecting-holes-along-Z-axis-on-model&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-only-detecting-holes-along-Z-axis-on-model" target="_blank" rel="noopener"&gt;FeatureCAM-only-detecting-holes-along-Z-axis-on-model&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Sub-spindle-milling-X-coordinates-posting-with-an-incorrect-sign-in-PartMaker&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:276608,&amp;quot;10&amp;quot;:2,&amp;quot;14&amp;quot;:{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:353217},&amp;quot;15&amp;quot;:&amp;quot;Calibri&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Sub-spindle-milling-X-coordinates-posting-with-an-incorrect-sign-in-PartMaker" target="_blank" rel="noopener"&gt;Sub-spindle-milling-X-coordinates-posting-with-an-incorrect-sign-in-PartMaker&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;February 2019&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="739" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;When synchronizing operations for a multi-turret machine, some sync points are not working in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/When-synchronizing-operations-for-a-multi-turret-machine-some-sync-points-are-not-working-in-FeatureCAM" target="_blank" rel="noopener"&gt;When synchronizing operations for a multi-turret machine, some sync points are not working in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Only one setup simulates when simulating a part with multiple setups in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Only-one-setup-simulates-when-simulating-a-part-with-multiple-setups-in-FeatureCAM" target="_blank" rel="noopener"&gt;Only one setup simulates when simulating a part with multiple setups in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;AFR is creating side features instead of hole features in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/AFR-is-creating-side-features-instead-of-hole-features-in-FeatureCAM" target="_blank" rel="noopener"&gt;AFR is creating side features instead of hole features in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to mill a hexagon by using the end of a cutter in FeatureCAM turn/mill&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-Hexagon-by-using-end-of-the-cutter-in-FeatureCAM-turn-mill" target="_blank" rel="noopener"&gt;How to mill a hexagon by using the end of a cutter in FeatureCAM turn/mill&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable to close FeatureCAM 2018&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-close-FeatureCAM-2018" target="_blank" rel="noopener"&gt;Unable to close FeatureCAM 2018&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;ID boring operation not posting rapid moves in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/ID-boring-operation-not-posting-rapid-moves-in-PartMaker" target="_blank" rel="noopener"&gt;ID boring operation not posting rapid moves in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Not seeing a G50 shift for tools in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Not-seeing-a-G50-shift-for-tools-in-PartMaker" target="_blank" rel="noopener"&gt;Not seeing a G50 shift for tools in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Cutoff tool does not change when selecting Left or Right Handed when viewing in simulation&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cutoff-tool-does-not-change-when-selecting-Left-or-Right-Handed-when-viewing-in-simulation" target="_blank" rel="noopener"&gt;Cutoff tool does not change when selecting Left or Right Handed when viewing in simulation&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Isoline operation disappears when selecting lead and lean in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Isoline-operation-disappears-when-selecting-lead-and-lean-in-FeatureCAM" target="_blank" rel="noopener"&gt;Isoline operation disappears when selecting lead and lean in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Warning: \&amp;quot;The selected machine design file does not exist and a smart choice has been made\&amp;quot; when generating an NC toolpath in FeatureCAM Standard&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Warning-The-selected-machine-design-file-does-not-exist-and-a-smart-choice-has-been-made-when-generating-an-NC-toolpath-in-FeatureCAM-Standard" target="_blank" rel="noopener"&gt;Warning: "The selected machine design file does not exist and a smart choice has been made" when generating an NC toolpath in FeatureCAM Standard&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="791" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Pick out the radius that is left in the corner when surface milling in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-Pick-out-the-radius-in-corner-of-pockets-when-surface-milling" target="_blank" rel="noopener"&gt;Pick out the radius that is left in the corner when surface milling in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;NC program files are saved using the base file name, but setup numbers (-2, -3, etc.) are not included in the file name in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/NC-program-files-are-saved-using-the-base-file-name-but-setup-numbers-2-3-etc-are-not-included-in-the-file-name-in-FeatureCAM" target="_blank" rel="noopener"&gt;NC program files are saved using the base file name, but setup numbers (-2, -3, etc.) are not included in the file name in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Can cycles used on the Gang Slide be used on the Backworking or Endworking tool posts in PartMaker?&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-cycles-used-on-the-Gang-Slide-be-used-on-the-Backworking-or-Endworking-tool-posts-in-PartMaker" target="_blank" rel="noopener"&gt;Can cycles used on the Gang Slide be used on the Backworking or Endworking tool posts in PartMaker?&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Live tooling spindle rotating the wrong way in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Live-tooling-spindle-rotating-the-wrong-way-in-FeatureCAM" target="_blank" rel="noopener"&gt;Live tooling spindle rotating the wrong way in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable to select a form tool in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-select-a-form-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;Unable to select a form tool in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Long save times in FeatureCam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Long-save-times-in-FeatureCam" target="_blank" rel="noopener"&gt;Long save times in FeatureCam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Tool retracting too high when surface milling in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Tool-retracting-too-high-when-surface-milling-in-FeatureCAM" target="_blank" rel="noopener"&gt;Tool retracting too high when surface milling in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-simultaneous-external-turning-and-drilling-toolpath-in-PartMaker&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:3,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:[null,2,353217],&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-simultaneous-external-turning-and-drilling-toolpath-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-create-a-simultaneous-external-turning-and-drilling-toolpath-in-PartMaker&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="807" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-wire-holes-on-a-swiss-machine-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-wire-holes-on-a-swiss-machine-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-create-wire-holes-on-a-swiss-machine-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-recognise-4-axis-hole-features-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-recognise-4-axis-hole-features-in-FeatureCAM" target="_blank" rel="noopener"&gt;Unable-recognise-4-axis-hole-features-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-drill-a-hole-with-the-largest-available-diameter-drill-and-mill-the-remaining-diameter-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-drill-a-hole-with-the-largest-available-diameter-drill-and-mill-the-remaining-diameter-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-drill-a-hole-with-the-largest-available-diameter-drill-and-mill-the-remaining-diameter-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-X-retract-moves-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-X-retract-moves-in-PartMaker" target="_blank" rel="noopener"&gt;How-to-change-X-retract-moves-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Cannot-import-Inventor-assembly-files-from-the-Vault-into-FeatureCAM&amp;quot;}"&gt;
&lt;P&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Cannot-import-Inventor-assembly-files-from-the-Vault-into-FeatureCAM" target="_blank" rel="noopener"&gt;Cannot-import-Inventor-assembly-files-from-the-Vault-into-FeatureCAM&lt;/A&gt;&lt;/P&gt;
&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;January 2019&lt;/P&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;PartMaker-will-not-allow-selection-of-off-center-Hole-for-drilling-operation&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:3,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:353217},&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PartMaker-will-not-allow-selection-of-off-center-Hole-for-drilling-operation" target="_blank" rel="noopener"&gt;PartMaker-will-not-allow-selection-of-off-center-Hole-for-drilling-operation&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="807" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Patterned-holes-reversing-direction-on-the-subspindle-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Patterned-holes-reversing-direction-on-the-subspindle-in-FeatureCAM" target="_blank" rel="noopener"&gt;Patterned-holes-reversing-direction-on-the-subspindle-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Macro-not-working-after-installing-newest-version-of-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Macro-not-working-after-installing-newest-version-of-FeatureCAM" target="_blank" rel="noopener"&gt;Macro-not-working-after-installing-newest-version-of-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-turning-tool-holder-from-a-solid-model-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-turning-tool-holder-from-a-solid-model-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-create-a-turning-tool-holder-from-a-solid-model-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-start-a-counterbore-in-the-center-of-a-hole-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-start-a-counterbore-in-the-center-of-a-hole-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-start-a-counterbore-in-the-center-of-a-hole-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Not seeing specific machine in list of machines when using PartMaker Multi-Channel Editor&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:276609,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;14&amp;quot;:{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:353217},&amp;quot;15&amp;quot;:&amp;quot;Calibri&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Not-seeing-specific-machine-in-list-of-machines-when-using-PartMaker-Multi-Channel-Editor" target="_blank" rel="noopener"&gt;Not seeing specific machine in list of machines when using PartMaker Multi-Channel Editor&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="676" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to set the path in the open document to the folder location last visited in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-the-path-in-the-open-document-to-the-folder-location-last-visited-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to set the path in the open document to the folder location last visited in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to reduce the size of a part in FeatureCAM turning&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-reduce-the-size-of-a-part-in-FeatureCAM-turning" target="_blank" rel="noopener"&gt;How to reduce the size of a part in FeatureCAM turning&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Impossible to set stepdown value in semifinish operation in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Impossible-to-set-stepdown-value-in-semifinish-operation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Impossible to set stepdown value in semifinish operation in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Custom lollipop cutter not cutting the bottom of the undercut surface in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Custom-lollipop-cutter-not-cutting-the-bottom-of-the-undercut-surface-in-FeatureCAM" target="_blank" rel="noopener"&gt;Custom lollipop cutter not cutting the bottom of the undercut surface in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Specific character not being machined when simulating engraving in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Specific-character-not-being-machined-when-simulating-engraving-in-PartMaker" target="_blank" rel="noopener"&gt;Specific character not being machined when simulating engraving in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to machine a diamond or hex shape in PartMaker with an X-oriented endmill&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-machine-a-diamond-or-hex-shape-in-PartMaker-with-an-X-oriented-endmill" target="_blank" rel="noopener"&gt;How to machine a diamond or hex shape in PartMaker with an X-oriented endmill&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;3D Simulation shows a gouge for a Turning toolpath in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/3D-Simulation-shows-a-gouge-for-a-Turning-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;3D Simulation shows a gouge for a Turning toolpath in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable to generate required helical passes in thread mill feature in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-generate-required-helical-passes-in-thread-mill-feature-in-FeatureCAM" target="_blank" rel="noopener"&gt;Unable to generate required helical passes in thread mill feature in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a 4-axis undercut deburr with a lollipop cutter in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-4-axis-undercut-deburr-with-a-lollipop-cutter-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a 4-axis undercut deburr with a lollipop cutter in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;PartMaker 3D surface milling not reading custom DXF tool shape properly&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PartMaker-3D-surface-milling-not-reading-custom-DXF-tool-shape-properly" target="_blank" rel="noopener"&gt;PartMaker 3D surface milling not reading custom DXF tool shape properly&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to remove a hole from a solid model in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-remove-a-hole-from-a-solid-model-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to remove a hole from a solid model in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="899" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable to see a center mark for an arc or circle in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-see-a-center-mark-for-an-arc-or-circle-in-FeatureCAM" target="_blank" rel="noopener"&gt;Unable to see a center mark for an arc or circle in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to generate individual programs for each setup in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-generate-individual-programs-for-each-setup-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to generate individual programs for each setup in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;AMDEU licensing error while simulating toolpaths in PartMaker&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:3,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:[null,2,353217],&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/AMDEU-licensing-error-while-simulating-toolpaths-in-PartMaker" target="_blank" rel="noopener"&gt;AMDEU licensing error while simulating toolpaths in PartMaker&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to access FeatureCAM subscription help pages offline&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:277377,&amp;quot;3&amp;quot;:{&amp;quot;1&amp;quot;:0},&amp;quot;10&amp;quot;:2,&amp;quot;11&amp;quot;:3,&amp;quot;12&amp;quot;:0,&amp;quot;14&amp;quot;:[null,2,353217],&amp;quot;15&amp;quot;:&amp;quot;Calibri, sans-serif&amp;quot;,&amp;quot;16&amp;quot;:11,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-access-FeatureCAM-subscription-help-pages-offline" target="_blank" rel="noopener"&gt;How to access FeatureCAM subscription help pages offline&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="899" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;5-axis spine finishing toolpath is lifting off of the part in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/5-axis-spine-finishing-toolpath-is-lifting-off-of-the-part-in-PartMaker" target="_blank" rel="noopener"&gt;5-axis spine finishing toolpath is lifting off of the part in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error: \&amp;quot;No spine data\&amp;quot; when calculating a spine finishing toolpath in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-No-spine-data-when-calculating-a-spine-finishing-toolpath-in-PartMaker" target="_blank" rel="noopener"&gt;Error: "No spine data" when calculating a spine finishing toolpath in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;PartMaker is posting incorrect file extension&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PartMaker-is-posting-incorrect-file-extension" target="_blank" rel="noopener"&gt;PartMaker is posting incorrect file extension&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to change a turning tool flash angle in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-a-turning-tool-flash-angle-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to change a turning tool flash angle in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="612" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-the-default-color-of-a-solid-in-FeatureCAM&amp;quot;}"&gt;&lt;A href="http://knowledge.autodesk.com/article/How-to-change-the-default-color-of-a-solid-in-FeatureCAM" target="_blank" rel="noopener"&gt;How-to-change-the-default-color-of-a-solid-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-move-Setup-location-to-stock-face-in-FeatureCAM-2018&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Why-does-PowerMILL-keyboard-shortcut-fail-to-run-macro-after-logging-out-and-back-in-again" target="_blank" rel="noopener"&gt;How-to-move-Setup-location-to-stock-face-in-FeatureCAM-2018&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;A style="font-family: inherit; background-color: #ffffff;" href="https://knowledge.autodesk.com/support/featurecam/troubleshooting/caas/sfdcarticles/sfdcarticles/Nothing-is-showing-in-the-operation-list-when-a-turning-operation-is-started-in-FeatureCAM.html" target="_blank" rel="noopener"&gt;Nothing-is-showing-in-the-operation-list-when-a-turning-operation-is-started-in-FeatureCAM&lt;/A&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="707" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error: \&amp;quot;Simulation Aborted due to Unexpected Error #21\&amp;quot; in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Simulation-Aborted-due-to-Unexpected-Error-21-in-PartMaker" target="_blank" rel="noopener"&gt;Error: "Simulation Aborted due to Unexpected Error #21" in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error:\&amp;quot;ONE OR MORE SOFT ERRORS THIS NC-CODE WILL NOT RUN PROPERLY\&amp;quot; while generating NC codes in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-ONE-OR-MORE-SOFT-ERRORS-THIS-NC-CODE-WILL-NOT-RUN-PROPERLY-while-generating-Nc-codes-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error:"ONE OR MORE SOFT ERRORS THIS NC-CODE WILL NOT RUN PROPERLY" while generating NC codes in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a mirror text in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-mirror-text-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a mirror text in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Side feature plunging into stock when roughing with NT Spiral stepover in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Side-feature-plunging-into-stock-when-roughing-with-NT-Spiral-stepover-in-FeatureCAM" target="_blank" rel="noopener"&gt;Side feature plunging into stock when roughing with NT Spiral stepover in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a chamfer toolpath with a shaped tool in FeatureCAM.&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-chamfer-toolpath-with-a-shaped-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a chamfer toolpath with a shaped tool in FeatureCAM.&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error: \&amp;quot;Library access violation: 41073-1245060\&amp;quot; shows when simulation crashes in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Library-access-violation-41073-1245060-shows-when-simulation-crashes-in-PartMaker" target="_blank" rel="noopener"&gt;Error: "Library access violation: 41073-1245060" shows when simulation crashes in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;User interface very slow when connected through VPN within FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/User-interface-very-slow-when-connected-through-VPN-within-FeatureCAM" target="_blank" rel="noopener"&gt;User interface very slow when connected through VPN within FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to convert curve in geometry in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-convert-curve-in-geometry-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to convert curve in geometry in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to disable the tool load graph when a 3D simulation is launched in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-disable-the-tool-load-graph-when-a-3D-simulation-is-launched-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to disable the tool load graph when a 3D simulation is launched in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Constant Z surfacing strategy splitting toolpath in half in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Constant-Z-surfacing-strategy-splitting-toolpath-in-half-in-PartMaker" target="_blank" rel="noopener"&gt;Constant Z surfacing strategy splitting toolpath in half in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to use the copy/paste special command in FeatureCAM to copy attributes from one toolpath to another&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-use-the-copy-paste-special-command-in-FeatureCAM-to-copy-attributes-from-one-toolpath-to-another" target="_blank" rel="noopener"&gt;How to use the copy/paste special command in FeatureCAM to copy attributes from one toolpath to another&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Print preview is too close in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Print-preview-is-too-close-in-FeatureCAM" target="_blank" rel="noopener"&gt;Print preview is too close in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Turning bore cuts air when roughing in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Turning-bore-cuts-air-when-roughing-in-FeatureCAM" target="_blank" rel="noopener"&gt;Turning bore cuts air when roughing in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;SQL tool database won't initialize in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/SQL-tool-database-won-t-initialize-in-FeatureCAM" target="_blank" rel="noopener"&gt;SQL tool database won't initialize in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Is it possible to perform an entire drill cycle on one hole before moving to the next in PartMaker?&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Is-it-possible-to-perform-an-entire-drill-cycle-on-one-hole-before-moving-to-the-next-in-PartMaker" target="_blank" rel="noopener"&gt;Is it possible to perform an entire drill cycle on one hole before moving to the next in PartMaker?&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a 3D internal groove using a side mill in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-3D-internal-groove-using-a-side-mill-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a 3D internal groove using a side mill in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;System becomes slow while rotating a model in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/System-becomes-slow-while-rotating-a-model-in-FeatureCAM" target="_blank" rel="noopener"&gt;System becomes slow while rotating a model in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to set a plunge depth based on the diameter of a tool in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-a-plunge-depth-based-on-the-diameter-of-a-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to set a plunge depth based on the diameter of a tool in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error:\&amp;quot;0xb0000005: Exception access violation\&amp;quot; and software crash when running 3D simulation in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-0xb0000005-Exception-access-violation-and-software-crash-when-running-3D-simulation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error:"0xb0000005: Exception access violation" and software crash when running 3D simulation in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to move the plunge point on toolpath in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-move-the-plunge-point-on-toolpath-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to move the plunge point on toolpath in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to remove locations from a rectangular pattern in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-remove-locations-from-a-rectangular-pattern-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to remove locations from a rectangular pattern in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Main spindle operations are posting to the sub-spindle in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Main-spindle-operations-are-posting-to-the-sub-spindle-in-PartMaker" target="_blank" rel="noopener"&gt;Main spindle operations are posting to the sub-spindle in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;File Info disappears in FeatureCAM 2018&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/File-Info-disappears-in-FeatureCAM-2018" target="_blank" rel="noopener"&gt;File Info disappears in FeatureCAM 2018&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create multiple hole features from a wireframe quickly in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-multiple-hole-features-from-a-wireframe-quickly-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create multiple hole features from a wireframe quickly in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Imported holder solid model not seated in spindle in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Imported-holder-solid-model-not-seated-in-spindle-in-FeatureCAM" target="_blank" rel="noopener"&gt;Imported holder solid model not seated in spindle in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a cleanup pass that returns a thread operation in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-cleanup-pass-that-returns-a-thread-operation-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a cleanup pass that returns a thread operation in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create hole features from DXF points in Featurecam&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-hole-features-from-DXF-points-in-Featurecam" target="_blank" rel="noopener"&gt;How to create hole features from DXF points in Featurecam&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to select index center of rotation in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-select-index-center-of-rotation-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to select index center of rotation in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error: \&amp;quot;Cannot run vizicut part compare without a solid target.\&amp;quot; after running a simulation in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Cannot-run-vizicut-part-compare-without-a-solid-target-after-running-a-simulation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error: "Cannot run vizicut part compare without a solid target." after running a simulation in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a finish pass for the bottom then machine the corners using a smaller tool in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-finish-pass-for-the-bottom-then-machine-the-corners-using-a-smaller-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a finish pass for the bottom then machine the corners using a smaller tool in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to minimize extra toolpath movements in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-minimize-extra-toolpath-movements-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to minimize extra toolpath movements in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;No metric tooling found in the Tools tool crib in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/No-metric-tooling-found-in-the-Tools-tool-crib-in-FeatureCAM" target="_blank" rel="noopener"&gt;No metric tooling found in the Tools tool crib in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Vortex in a narrow side feature is causing unwanted retracts in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Vortex-in-a-narrow-side-feature-is-causing-unwanted-retracts-in-FeatureCAM" target="_blank" rel="noopener"&gt;Vortex in a narrow side feature is causing unwanted retracts in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a Multiple fixture project with n repetitions of a single setup using more origins in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-Multiple-fixture-project-with-n-repetitions-of-a-single-setup-using-more-origins-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a Multiple fixture project with n repetitions of a single setup using more origins in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a Multiple fixture project with n repetitions of a single setup using more origins in FeatureCAM.&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-Multiple-fixture-project-with-n-repetitions-of-a-single-setup-using-more-origins-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a Multiple fixture project with n repetitions of a single setup using more origins in FeatureCAM.&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Tool cutting on centerline but location is set to left/right in PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Tool-cutting-on-centerline-but-location-is-set-to-left-in-PartMaker" target="_blank" rel="noopener"&gt;Tool cutting on centerline but location is set to left/right in PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;The text dimensions are too little or too big to read in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-text-dimensions-are-too-little-or-too-big-to-read-in-FeatureCAM" target="_blank" rel="noopener"&gt;The text dimensions are too little or too big to read in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to counterdrill the large hole first in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-counterdrill-the-large-hole-first-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to counterdrill the large hole first in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a continuous Finish operation in a Side Feature in FeatureCAM.&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-continuous-Finish-operation-in-a-Side-Feature-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a continuous Finish operation in a Side Feature in FeatureCAM.&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Increased feed rate for non-cutting moves for vortex not being posted correct in code in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Increased-feed-rate-for-non-cutting-moves-for-vortex-not-being-posted-correct-in-code-in-FeatureCAM" target="_blank" rel="noopener"&gt;Increased feed rate for non-cutting moves for vortex not being posted correct in code in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="809" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a Chamfer toolpath with automatic recognition by using Side Mill Features in FeatureCAM.&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-Chamfer-toolpath-with-automatic-recognition-by-using-Side-Mill-Features-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a Chamfer toolpath with automatic recognition by using Side Mill Features in FeatureCAM.&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Are there a list of simulation error codes for PartMaker?&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Are-there-a-list-of-simulation-error-codes-for-PartMaker" target="_blank" rel="noopener"&gt;Are there a list of simulation error codes for PartMaker?&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a custom slitting tool in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-custom-slitting-tool-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a custom slitting tool in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error: \&amp;quot;Could not write to\&amp;quot; when creating an NC program in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Could-not-write-to-when-creating-an-NC-program-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error: "Could not write to" when creating an NC program in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to create a toolpath from an NC code in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-toolpath-from-an-NC-code-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to create a toolpath from an NC code in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Spiral face UDF does not follow inside of the curve in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Spiral-face-UDF-does-not-follow-inside-of-the-curve-in-FeatureCAM" target="_blank" rel="noopener"&gt;Spiral face UDF does not follow inside of the curve in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to define a counter clockwise rotation for thread milling in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-define-a-counter-clockwise-rotation-for-thread-milling-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to define a counter clockwise rotation for thread milling in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Finish pass cuts outside of rough pass when using negative leave and finish allowances in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Finish-pass-cuts-outside-of-rough-pass-when-using-negative-leave-and-finish-allowances-in-FeatureCAM" target="_blank" rel="noopener"&gt;Finish pass cuts outside of rough pass when using negative leave and finish allowances in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to set Z rapid plane in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-Z-rapid-plane-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to set Z rapid plane in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to change tool in more operation at the same time into the Operation List in FeatureCAM.&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-tool-in-more-operation-at-the-same-time-into-the-Operation-List-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to change tool in more operation at the same time into the Operation List in FeatureCAM.&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to set the default feed and speed of tools in tool manager on FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-the-default-feed-and-speed-of-tools-in-tool-manager-on-FeatureCAM" target="_blank" rel="noopener"&gt;How to set the default feed and speed of tools in tool manager on FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;P&gt;&lt;SPAN data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Save Simulation Results not available in FeatureCAM&amp;quot;}" data-sheets-userformat="{&amp;quot;2&amp;quot;:268418,&amp;quot;4&amp;quot;:{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:16776960},&amp;quot;10&amp;quot;:2,&amp;quot;14&amp;quot;:[null,2,255],&amp;quot;15&amp;quot;:&amp;quot;Arial&amp;quot;,&amp;quot;21&amp;quot;:1}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Save-Simulation-Results-not-available-in-FeatureCAM" target="_blank" rel="noopener"&gt;Save Simulation Results not available in FeatureCAM&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="760" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-set-the-tool-collision-in-PartMaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-show-annotations-from-existing-items-on-Isometric-drawings-in-AutoCAD-Plant-3D" target="_blank" rel="noopener"&gt;How-to-set-the-tool-collision-in-PartMaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Addins-tab-not-switchable-grey-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-machine-part-walls-using-up-down-finishing-passes-in-PowerMill" target="_blank" rel="noopener"&gt;Addins-tab-not-switchable-grey-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-stock-from-square-to-round-to-modify-a-project-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Switch-Team-option-missing-in-Fusion-360-for-the-editor-of-a-Fusion-Team-Hub-project" target="_blank" rel="noopener"&gt;How-to-change-stock-from-square-to-round-to-modify-a-project-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-insert-drill-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Infraworks-ArcGIS-Data-Connection-does-not-work-due-to-error" target="_blank" rel="noopener"&gt;How-to-create-a-insert-drill-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Unable-to-modify-feed-speed-and-tool-number-in-multiple-fixture-document-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Temperature-values-on-heat-source-do-not-reflect-reality-in-Autodesk-CFD" target="_blank" rel="noopener"&gt;Unable-to-modify-feed-speed-and-tool-number-in-multiple-fixture-document-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-the-tool-diameter-inside-a-Multiple-Fixture-file-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Form-mill-does-not-look-like-the-imported-tool-model-in-HSM-or-Fusion-360-CAM" target="_blank" rel="noopener"&gt;How-to-change-the-tool-diameter-inside-a-Multiple-Fixture-file-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Surface-milling-feature-roughing-pass-not-cutting-properly-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Moldflow-causing-explorer-exe-to-crash" target="_blank" rel="noopener"&gt;Surface-milling-feature-roughing-pass-not-cutting-properly-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-turning-feature-toolpath-by-using-a-shaped-tool-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/userSetup-melを使ってMtoA-2-0-2-4のプラグインを読み込ませると-バッチレンダーでlookdevkitシェーダが正しく読み込まれない" target="_blank" rel="noopener"&gt;How-to-create-a-turning-feature-toolpath-by-using-a-shaped-tool-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-create-a-5-axis-positioned-drilling-toolpath-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/All-files-and-projects-went-missing-in-a-BIM-360-Document-Management-account" target="_blank" rel="noopener"&gt;How-to-create-a-5-axis-positioned-drilling-toolpath-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-run-the-UDF-thin-wall-milling-macro-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Moldflow-insightの反り解析のみジョブマネージャの解析結果ダウンロード中で失敗する" target="_blank" rel="noopener"&gt;How-to-run-the-UDF-thin-wall-milling-macro-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-have-only-one-pre-dill-in-a-milling-operation-within-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Can-t-read-the-broken-document-when-attempting-to-open-a-document-from-the-BIM-360-Field-project-library" target="_blank" rel="noopener"&gt;How-to-have-only-one-pre-dill-in-a-milling-operation-within-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-broach-a-keyway-in-a-milling-document-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PowerMILL-Saving-Machine-model-with-project-so-as-to-open-on-another-system-with-MTD" target="_blank" rel="noopener"&gt;How-to-broach-a-keyway-in-a-milling-document-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-enable-3D-cutter-compensation-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Is-it-possible-to-use-a-pipe-as-a-target-object-in-Subassembly-Composer-in-Civil-3D" target="_blank" rel="noopener"&gt;How-to-enable-3D-cutter-compensation-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-add-notes-between-features-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Slow-performance-while-opening-Views-and-Sheets-in-the-Project-Navigator-in-AutoCAD-Architecture-MEP" target="_blank" rel="noopener"&gt;How-to-add-notes-between-features-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;User-defined-icons-are-getting-lost-from-the-quick-access-toolbar-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-run-the-UDF-thin-wall-milling-macro-in-FeatureCAM" target="_blank" rel="noopener"&gt;User-defined-icons-are-getting-lost-from-the-quick-access-toolbar-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-change-the-Select-Tool-Parameter-options-in-Manage-tools-file-window-in-Partmaker&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-can-using-revision-control-in-Vault-Basic" target="_blank" rel="noopener"&gt;How-to-change-the-Select-Tool-Parameter-options-in-Manage-tools-file-window-in-Partmaker&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM-3D-simulation-180-degrees-out-of-position&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Appearances-from-Inventor-have-index-numbers-when-brought-into-AutoCAD" target="_blank" rel="noopener"&gt;FeatureCAM-3D-simulation-180-degrees-out-of-position&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Check-surfaces-button-is-greyed-out-in-the-side-feature-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-can-deactivating-creating-dwf-during-checking-in-into-Vault" target="_blank" rel="noopener"&gt;Check-surfaces-button-is-greyed-out-in-the-side-feature-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Stepover-value-for-face-feature-is-not-following-default-values-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/System-requirements-for-AutoCAD-for-Mac-2019" target="_blank" rel="noopener"&gt;Stepover-value-for-face-feature-is-not-following-default-values-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Cutting-an-internal-radius-into-shaft-but-toolpath-appears-on-opposite-side-of-the-lathe-after-export-from-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/TIFFファイルなどのイメージファイルをインポートすると解像度が変わってしまうことがある" target="_blank" rel="noopener"&gt;Cutting-an-internal-radius-into-shaft-but-toolpath-appears-on-opposite-side-of-the-lathe-after-export-from-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How-to-transform-a-UCS-in-FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-add-files-and-folders-directly-to-a-Vault" target="_blank" rel="noopener"&gt;How-to-transform-a-UCS-in-FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;
&lt;TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"&gt;&lt;COLGROUP&gt;&lt;COL width="899" /&gt;&lt;/COLGROUP&gt;
&lt;TBODY&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Is it necessary to install software patches from the oldest to the newest for FeatureCAM and PowerMill?&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Is-it-necessary-to-install-software-patches-from-the-oldest-to-the-newest-for-FeatureCAM-and-PowerMill" target="_blank" rel="noopener"&gt;Is it necessary to install software patches from the oldest to the newest for FeatureCAM and PowerMill?&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Is it possible to set a maximum depth of cut in Z-Level Finish strategy when we use the option scallop stepover in FeatureCAM?&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Is-it-possible-to-set-a-maximum-depth-of-cut-in-Z-Level-Finish-strategy-when-we-use-the-option-scallop-stepover-in-FeatureCAM" target="_blank" rel="noopener"&gt;Is it possible to set a maximum depth of cut in Z-Level Finish strategy when we use the option scallop stepover in FeatureCAM?&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Incorrect profle when use compensation in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Incorrect-profle-when-use-compensation-in-FeatureCAM" target="_blank" rel="noopener"&gt;Incorrect profle when use compensation in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to set up a path for files in the open document folder in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-up-a-path-for-files-in-the-open-document-folder-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to set up a path for files in the open document folder in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to unlock a FeatureCAM MD file&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-unlock-a-FeatureCAM-MD-file" target="_blank" rel="noopener"&gt;How to unlock a FeatureCAM MD file&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error: TPD9999: when changing some geometry in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-TPD9999-when-changing-some-geometry-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error: TPD9999: when changing some geometry in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to quickly select multiple surfaces in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-quickly-select-multiple-surfaces-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to quickly select multiple surfaces in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Setup sheet add-in is not printing images in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Setup-sheet-add-in-is-not-printing-images-in-FeatureCAM" target="_blank" rel="noopener"&gt;Setup sheet add-in is not printing images in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to modify a 2.5D feature by editing the curve in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-modify-a-2-5D-feature-by-editing-the-curve-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to modify a 2.5D feature by editing the curve in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Features icon is not available in FeatureCAM trial version&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Features-icon-is-not-available-in-FeatureCAM-trial-version" target="_blank" rel="noopener"&gt;Features icon is not available in FeatureCAM trial version&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;FeatureCAM API documentation missing information from recent versions of FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/FeatureCAM-API-documentation-missing-information-from-recent-versions-of-FeatureCAM" target="_blank" rel="noopener"&gt;FeatureCAM API documentation missing information from recent versions of FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;DXF file dimensions change after import from AutoCAD into FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/DXF-file-dimensions-change-after-import-from-AutoCAD-into-FeatureCAM" target="_blank" rel="noopener"&gt;DXF file dimensions change after import from AutoCAD into FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Error: \&amp;quot;Unable to construct object with these inputs\&amp;quot; when creating a curve mesh surface in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Unable-to-construct-object-with-these-inputs-when-creating-a-curve-mesh-surface-in-FeatureCAM" target="_blank" rel="noopener"&gt;Error: "Unable to construct object with these inputs" when creating a curve mesh surface in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;A custom tab is not saving new items correctly in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/A-custom-tab-is-not-saving-new-items-correctly-in-FeatureCAM" target="_blank" rel="noopener"&gt;A custom tab is not saving new items correctly in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to get tools list in excel format from FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-get-tools-list-in-excel-format-from-FeatureCAM" target="_blank" rel="noopener"&gt;How to get tools list in excel format from FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;PartMaker post editor showing a blank screen after opening post&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/PartMaker-post-editor-showing-a-blank-screen-after-opening-post" target="_blank" rel="noopener"&gt;PartMaker post editor showing a blank screen after opening post&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;Machine simulation file retracting to home position when Indexing in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/Machine-simulation-file-retracting-to-home-position-when-Indexing-in-FeatureCAM" target="_blank" rel="noopener"&gt;Machine simulation file retracting to home position when Indexing in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to limit a toolpath in a surface feature by using the results of the previous 2.5D features in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-limit-a-toolpath-in-a-surface-feature-by-using-the-results-of-the-previous-2-5D-features-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to limit a toolpath in a surface feature by using the results of the previous 2.5D features in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;TR&gt;
&lt;TD data-sheets-value="{&amp;quot;1&amp;quot;:2,&amp;quot;2&amp;quot;:&amp;quot;How to slow the feed in move on a thread milling feature in FeatureCAM&amp;quot;}"&gt;&lt;A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-slow-the-feed-in-move-on-a-thread-milling-feature-in-FeatureCAM" target="_blank" rel="noopener"&gt;How to slow the feed in move on a thread milling feature in FeatureCAM&lt;/A&gt;&lt;/TD&gt;
&lt;/TR&gt;
&lt;/TBODY&gt;
&lt;/TABLE&gt;</description>
      <pubDate>Thu, 02 Jan 2020 18:15:36 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/2019-latest-updates-new-knowledge-network-articles-featurecam/m-p/8511345#M4143</guid>
      <dc:creator>diana.yr</dc:creator>
      <dc:date>2020-01-02T18:15:36Z</dc:date>
    </item>
  </channel>
</rss>

