<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>tema Re: featurecam turn feeds mmpr en FeatureCAM Forum</title>
    <link>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/8003776#M2848</link>
    <description>&lt;P&gt;thanks, worked a treat,&amp;nbsp;&lt;/P&gt;</description>
    <pubDate>Tue, 15 May 2018 18:14:34 GMT</pubDate>
    <dc:creator>Anonymous</dc:creator>
    <dc:date>2018-05-15T18:14:34Z</dc:date>
    <item>
      <title>featurecam turn feeds mmpr</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7973615#M2751</link>
      <description>&lt;P&gt;hi, when posting from featureturn to post processor the feeds are not transfering over when in mmpr. i get F0.&amp;nbsp; .if i run in mmpm and fixed spindle speed it is fine, if i alter the mmpr to a figure over 1.0 its fine so im assuming its not bringing the decimal places over (0.318) is default,i have checked in options ,decimal places and seems ok. ive tried it with all processors and materials. any ideas?&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Wed, 02 May 2018 07:59:42 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7973615#M2751</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-05-02T07:59:42Z</dc:date>
    </item>
    <item>
      <title>Re: featurecam turn feeds mmpr</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7974077#M2752</link>
      <description>&lt;P&gt;Hi @Anonymous&lt;/a&gt;,&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;I have tried with a face op. and all fine with me. can you share something?&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Wed, 02 May 2018 12:20:48 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7974077#M2752</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-05-02T12:20:48Z</dc:date>
    </item>
    <item>
      <title>Re: featurecam turn feeds mmpr</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7974646#M2754</link>
      <description>&lt;P&gt;&lt;A href="https://knowledge.autodesk.com/community/screencast/26f2e224-0d02-47f5-92a2-b82453977722" target="_blank"&gt;https://knowledge.autodesk.com/community/screencast/26f2e224-0d02-47f5-92a2-b82453977722&lt;/A&gt;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;see if you can open this,&amp;nbsp; thnks&lt;/P&gt;</description>
      <pubDate>Wed, 02 May 2018 15:21:28 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7974646#M2754</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-05-02T15:21:28Z</dc:date>
    </item>
    <item>
      <title>Re: featurecam turn feeds mmpr</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7974674#M2755</link>
      <description>&lt;P&gt;% with mmpr enabled&amp;nbsp;&lt;BR /&gt;O0001 (~TOP PIN NEW 5-2-2018)&lt;BR /&gt;N1&lt;BR /&gt;(SW_PROFILE_35M_RH)&lt;BR /&gt;(ROUGH TURN TURN1)&lt;BR /&gt;G0 G21 G40 G80 G90 G95&lt;BR /&gt;G92 S3000&lt;BR /&gt;G96 S67 T0202 M3&lt;BR /&gt;X33.452 Z3.058 M8&lt;BR /&gt;G1 Z-77.731 F0.&lt;BR /&gt;X40.0&lt;BR /&gt;X40.898 Z-77.282&lt;BR /&gt;G0 Z3.058&lt;BR /&gt;G1 X26.904 F0.&lt;BR /&gt;Z-77.731&lt;BR /&gt;X33.452&lt;BR /&gt;X34.35 Z-77.282&lt;BR /&gt;G0 Z3.058&lt;BR /&gt;G1 X22.478 F0.&lt;BR /&gt;Z-52.442&lt;BR /&gt;G3 X26.773 Z-54.804 R16.987&lt;BR /&gt;X26.904 Z-55.0 R0.327&lt;BR /&gt;G1 X27.802 Z-54.551&lt;BR /&gt;G0 Z3.058&lt;BR /&gt;G1 X14.611 F0.&lt;BR /&gt;Z-49.761&lt;BR /&gt;G3 X22.478 Z-52.442 R16.987&lt;BR /&gt;G1 X23.376 Z-51.993&lt;BR /&gt;G0 Z3.058&lt;BR /&gt;G1 X12.254 F0.&lt;BR /&gt;Z-19.595&lt;BR /&gt;X12.844 Z-19.688&lt;BR /&gt;G3 X13.301 Z-19.991 R0.327&lt;BR /&gt;G1 X14.611 Z-44.991&lt;BR /&gt;G3 X14.611 Z-45.0 R0.327&lt;BR /&gt;G1 X15.509 Z-44.551&lt;BR /&gt;G0 Z3.058&lt;BR /&gt;G1 X11.759 F0.&lt;BR /&gt;Z0.318&lt;BR /&gt;X11.797 Z0.312&lt;BR /&gt;G3 X12.254 Z0. R0.327&lt;BR /&gt;G1 X13.152 Z0.449&lt;BR /&gt;G0 X31.984&lt;BR /&gt;Z-55.0&lt;BR /&gt;G1 X26.904 F0.&lt;BR /&gt;G3 X26.447 Z-55.312 R0.327&lt;BR /&gt;G1 X22.478 Z-55.938&lt;BR /&gt;Z-77.731&lt;BR /&gt;X26.904&lt;BR /&gt;X27.802 Z-77.282&lt;BR /&gt;G0 Z-55.938&lt;BR /&gt;G1 X22.478 F0.&lt;BR /&gt;Z-77.413&lt;BR /&gt;G3 X22.021 Z-77.725 R0.327&lt;BR /&gt;G1 X21.983 Z-77.731&lt;BR /&gt;X22.478&lt;BR /&gt;X23.376 Z-77.282&lt;BR /&gt;G0 X45.08&lt;/P&gt;&lt;P&gt;(FINISH TURN TURN1)&lt;BR /&gt;G92 S3000&lt;BR /&gt;G96 S91 M3&lt;BR /&gt;X45.08 Z2.597&lt;BR /&gt;X13.392&lt;BR /&gt;G1 X12.0 Z0. F0.&lt;BR /&gt;Z-19.688&lt;BR /&gt;X12.768 Z-19.809&lt;BR /&gt;G3 X13.047 Z-19.995 R0.2&lt;BR /&gt;G1 X14.357 Z-44.995&lt;BR /&gt;G3 X14.357 Z-45.0 R0.2&lt;BR /&gt;G1 Z-49.84&lt;BR /&gt;G3 X26.57 Z-54.88 R16.86&lt;BR /&gt;X26.65 Z-55.0 R0.2&lt;BR /&gt;X26.37 Z-55.191 R0.2&lt;BR /&gt;G1 X22.224 Z-55.844&lt;BR /&gt;Z-77.413&lt;BR /&gt;X26.099 Z-75.475&lt;BR /&gt;G0 X45.08&lt;BR /&gt;G0 G28 U0. W0. M9&lt;BR /&gt;T0200 M5&lt;BR /&gt;M30&lt;BR /&gt;%&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;% with mmpr unchecked and constant spindle speed&lt;BR /&gt;O0001 (~TOP PIN NEW 5-2-2018)&lt;BR /&gt;N1&lt;BR /&gt;(SW_PROFILE_35M_RH)&lt;BR /&gt;(ROUGH TURN TURN1)&lt;BR /&gt;G0 G21 G40 G80 G90 G94&lt;BR /&gt;G92 S960&lt;BR /&gt;G97 S960 T0202 M3&lt;BR /&gt;X33.452 Z3.058 M8&lt;BR /&gt;G1 Z-77.731 F366.&lt;BR /&gt;X40.0&lt;BR /&gt;X40.898 Z-77.282&lt;BR /&gt;G0 Z3.058&lt;BR /&gt;G1 X26.904 F366.&lt;BR /&gt;Z-77.731&lt;BR /&gt;X33.452&lt;BR /&gt;X34.35 Z-77.282&lt;BR /&gt;G0 Z3.058&lt;BR /&gt;G1 X22.478 F366.&lt;BR /&gt;Z-52.442&lt;BR /&gt;G3 X26.773 Z-54.804 R16.987&lt;BR /&gt;X26.904 Z-55.0 R0.327&lt;BR /&gt;G1 X27.802 Z-54.551&lt;BR /&gt;G0 Z3.058&lt;BR /&gt;G1 X14.611 F366.&lt;BR /&gt;Z-49.761&lt;BR /&gt;G3 X22.478 Z-52.442 R16.987&lt;BR /&gt;G1 X23.376 Z-51.993&lt;BR /&gt;G0 Z3.058&lt;BR /&gt;G1 X12.254 F366.&lt;BR /&gt;Z-19.595&lt;BR /&gt;X12.844 Z-19.688&lt;BR /&gt;G3 X13.301 Z-19.991 R0.327&lt;BR /&gt;G1 X14.611 Z-44.991&lt;BR /&gt;G3 X14.611 Z-45.0 R0.327&lt;BR /&gt;G1 X15.509 Z-44.551&lt;BR /&gt;G0 Z3.058&lt;BR /&gt;G1 X11.759 F366.&lt;BR /&gt;Z0.318&lt;BR /&gt;X11.797 Z0.312&lt;BR /&gt;G3 X12.254 Z0. R0.327&lt;BR /&gt;G1 X13.152 Z0.449&lt;BR /&gt;G0 X31.984&lt;BR /&gt;Z-55.0&lt;BR /&gt;G1 X26.904 F366.&lt;BR /&gt;G3 X26.447 Z-55.312 R0.327&lt;BR /&gt;G1 X22.478 Z-55.938&lt;BR /&gt;Z-77.731&lt;BR /&gt;X26.904&lt;BR /&gt;X27.802 Z-77.282&lt;BR /&gt;G0 Z-55.938&lt;BR /&gt;G1 X22.478 F366.&lt;BR /&gt;Z-77.413&lt;BR /&gt;G3 X22.021 Z-77.725 R0.327&lt;BR /&gt;G1 X21.983 Z-77.731&lt;BR /&gt;X22.478&lt;BR /&gt;X23.376 Z-77.282&lt;BR /&gt;G0 X45.08&lt;/P&gt;&lt;P&gt;(FINISH TURN TURN1)&lt;BR /&gt;G92 S3000&lt;BR /&gt;G96 S91 M3&lt;BR /&gt;X45.08 Z2.597&lt;BR /&gt;X13.392&lt;BR /&gt;G1 X12.0 Z0. F0.&lt;BR /&gt;Z-19.688&lt;BR /&gt;X12.768 Z-19.809&lt;BR /&gt;G3 G95 X13.047 Z-19.995 R0.2&lt;BR /&gt;G1 X14.357 Z-44.995&lt;BR /&gt;G3 X14.357 Z-45.0 R0.2&lt;BR /&gt;G1 Z-49.84&lt;BR /&gt;G3 X26.57 Z-54.88 R16.86&lt;BR /&gt;X26.65 Z-55.0 R0.2&lt;BR /&gt;X26.37 Z-55.191 R0.2&lt;BR /&gt;G1 X22.224 Z-55.844&lt;BR /&gt;Z-77.413&lt;BR /&gt;X26.099 Z-75.475&lt;BR /&gt;G0 X45.08&lt;BR /&gt;G0 G28 U0. W0. M9&lt;BR /&gt;T0200 M5&lt;BR /&gt;M30&lt;BR /&gt;%&lt;/P&gt;</description>
      <pubDate>Wed, 02 May 2018 15:30:19 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7974674#M2755</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-05-02T15:30:19Z</dc:date>
    </item>
    <item>
      <title>Re: featurecam turn feeds mmpr</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7976472#M2760</link>
      <description>&lt;P&gt;Hi @Anonymous&lt;/a&gt;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;I can't see your video, you have private permission on.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Thu, 03 May 2018 07:26:21 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7976472#M2760</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-05-03T07:26:21Z</dc:date>
    </item>
    <item>
      <title>Re: featurecam turn feeds mmpr</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7977930#M2766</link>
      <description>&lt;P&gt;Hi&amp;nbsp;@Anonymous&lt;/a&gt;,&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Thanks for raising your query via Autodesk Forum.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Can you please refer the image below and check the factors set in your post-processor?&amp;nbsp;&amp;nbsp;&lt;STRONG class="ph b"&gt;Inch Format / Metric Format&lt;/STRONG&gt;&amp;nbsp;— These boxes specify the number of digits to be displayed in imperial and metric formats.&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Also keep&amp;nbsp; &lt;STRONG&gt;Decimal Point&lt;/STRONG&gt; checked which is just below the factors, to include a decimal point in values. For example, when&amp;nbsp;&lt;STRONG class="ph b"&gt;Decimal point&lt;/STRONG&gt;&amp;nbsp;is selected, 100&amp;nbsp;is output as&amp;nbsp;&lt;SAMP class="ph codeph"&gt;100.0&lt;/SAMP&gt;.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="factor.png" style="width: 999px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/496254iEDA122E148097C63/image-size/large?v=v2&amp;amp;px=999" role="button" title="factor.png" alt="factor.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Hope this helps. If my post answers your question, please click on '&lt;STRONG&gt;Accept as solution&lt;/STRONG&gt;' button.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Thank You.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Thu, 03 May 2018 16:59:35 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7977930#M2766</guid>
      <dc:creator>abhishek.juvekar</dc:creator>
      <dc:date>2018-05-03T16:59:35Z</dc:date>
    </item>
    <item>
      <title>Re: featurecam turn feeds mmpr</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7978447#M2767</link>
      <description>&lt;P&gt;GREAT THANKS,&amp;nbsp; it was one of the metric format boxes not set to 4.3&amp;nbsp; on word page 1 .i have a friend with a similar set up and copied his .how do i modify the processor to include m41 or m40 for gear selection at the start of the programme as in what text would i write in the format,programme start as below&lt;/P&gt;&lt;P&gt;&amp;lt;IF&amp;gt;[eq(&amp;lt;FM-NAME&amp;gt;,&amp;lt;PROG-NAME&amp;gt;)]&amp;lt;THEN&amp;gt;[:&amp;lt;PROG-NAME&amp;gt;="0001"]&amp;lt;ENDIF&amp;gt;&lt;BR /&gt;%&amp;lt;EOB&amp;gt;&lt;BR /&gt;O&amp;lt;PROG-NAME&amp;gt; ([UPPERCASE(&amp;lt;FM-NAME&amp;gt;)] &amp;lt;DATE&amp;gt;)&amp;lt;EOB&amp;gt;&lt;BR /&gt;N[&amp;lt;SEQ&amp;gt;:n_num=1]&amp;lt;EOB&amp;gt;&lt;BR /&gt;([UPPERCASE(&amp;lt;TOOL-NAME&amp;gt;)])&amp;lt;EOB&amp;gt;&lt;BR /&gt;(&amp;lt;OP-PASS&amp;gt; &amp;lt;OP-TYPE&amp;gt; &amp;lt;SEGM-ID&amp;gt;)&amp;lt;EOB&amp;gt;&lt;BR /&gt;&amp;lt;MOTION&amp;gt; &amp;lt;UNITS&amp;gt; G40 G80 G90 &amp;lt;F-UNITS&amp;gt;&amp;lt;EOB&amp;gt;&lt;BR /&gt;G92 S&amp;lt;SP-MAX&amp;gt;&amp;lt;EOB&amp;gt;&lt;BR /&gt;&amp;lt;IF&amp;gt;&amp;lt;CSS-ON&amp;gt;&amp;lt;THEN&amp;gt;&lt;BR /&gt;G96 S&amp;lt;CSS-SPEED&amp;gt;&lt;BR /&gt;&amp;lt;ENDIF&amp;gt;&lt;BR /&gt;&amp;lt;IFNOT&amp;gt;&amp;lt;CSS-ON&amp;gt;&amp;lt;THEN&amp;gt;&lt;BR /&gt;G97 S&amp;lt;SPEED&amp;gt;&lt;BR /&gt;&amp;lt;ENDIF&amp;gt;&lt;BR /&gt;&amp;lt;BOL&amp;gt; T&amp;lt;TOOL&amp;gt;&amp;lt;OFFSET#&amp;gt; &amp;lt;SPINDLE&amp;gt;&amp;lt;EOB&amp;gt;&lt;BR /&gt;X&amp;lt;X-COORD&amp;gt; Z&amp;lt;Z-COORD&amp;gt; &amp;lt;COOLANT&amp;gt;&amp;lt;EOB&amp;gt;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;thanks for your help ,neil&amp;nbsp;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Thu, 03 May 2018 19:39:24 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7978447#M2767</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-05-03T19:39:24Z</dc:date>
    </item>
    <item>
      <title>Re: featurecam turn feeds mmpr</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7994548#M2816</link>
      <description>&lt;P&gt;HI,thanks for the help, do you know what i need to write in the xbuild post processor start option to give the lathe its M40 M41 M42 transmission gear options&amp;nbsp; thanks neil&lt;/P&gt;</description>
      <pubDate>Fri, 11 May 2018 06:25:15 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7994548#M2816</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-05-11T06:25:15Z</dc:date>
    </item>
    <item>
      <title>Re: featurecam turn feeds mmpr</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7994590#M2817</link>
      <description>&lt;P&gt;Hello&amp;nbsp;@Anonymous&lt;/a&gt;,&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;I am not a post-processor expert but refer the image below:&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="E8193674.PNG" style="width: 429px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/499158i4771435D113E373A/image-size/large?v=v2&amp;amp;px=999" role="button" title="E8193674.PNG" alt="E8193674.PNG" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;AND add &amp;lt;SP-RANGE&amp;gt; in POST&lt;/P&gt;
&lt;P&gt;This hook the values M41 AND M42 depending on speed selected in FeatureCAM.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Hope this helps.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Thank You.&lt;/P&gt;</description>
      <pubDate>Fri, 11 May 2018 06:43:40 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/7994590#M2817</guid>
      <dc:creator>abhishek.juvekar</dc:creator>
      <dc:date>2018-05-11T06:43:40Z</dc:date>
    </item>
    <item>
      <title>Re: featurecam turn feeds mmpr</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/8003776#M2848</link>
      <description>&lt;P&gt;thanks, worked a treat,&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Tue, 15 May 2018 18:14:34 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/featurecam-turn-feeds-mmpr/m-p/8003776#M2848</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-05-15T18:14:34Z</dc:date>
    </item>
  </channel>
</rss>

