<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>tema Re: Milling helical gear teeth on a turn mill en FeatureCAM Forum</title>
    <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7792797#M2316</link>
    <description>&lt;P&gt;Sorry for the delay.&amp;nbsp; Here is the part, loaded in FC.&lt;/P&gt;</description>
    <pubDate>Tue, 20 Feb 2018 18:57:41 GMT</pubDate>
    <dc:creator>Anonymous</dc:creator>
    <dc:date>2018-02-20T18:57:41Z</dc:date>
    <item>
      <title>Milling helical gear teeth on a turn mill</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7788734#M2299</link>
      <description>&lt;P&gt;Hello,&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;We would like to try milling helical gear teeth on our Samsung turn mill.&amp;nbsp; It is a pinion lathe with X, Y, and Z axis and live tooling.&amp;nbsp; We do not want to mill it as a surface mill feature, but mill along the Z axis while the C axis is rotating.&amp;nbsp; Has anybody dealt with programming this type of feature?&amp;nbsp; I just need a starting point to begin trying different methods.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;Thank you,&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;-John&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Mon, 19 Feb 2018 14:19:21 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7788734#M2299</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-02-19T14:19:21Z</dc:date>
    </item>
    <item>
      <title>Re: Milling helical gear teeth on a turn mill</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7788873#M2300</link>
      <description>&lt;P&gt;What are you using to cut the teeth?&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Mon, 19 Feb 2018 14:53:40 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7788873#M2300</guid>
      <dc:creator>TomOliver</dc:creator>
      <dc:date>2018-02-19T14:53:40Z</dc:date>
    </item>
    <item>
      <title>Re: Milling helical gear teeth on a turn mill</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7788908#M2301</link>
      <description>&lt;P&gt;We are planning on using a 4 or 5 flute carbide end mill with the end facing X-.&amp;nbsp; Our plan is to mill along the Z axis as the C axis rotates.&amp;nbsp; We have several different gear pitch sizes, so the actual diameter would vary from one to the next.&amp;nbsp; I just don't know where to begin as far as building the feature.&amp;nbsp; Would I need to unwrap the helix first, then wrap it around Z axis, or does another feature recognize the twist in the helix?&amp;nbsp; First attempt to select the feature as a side&amp;nbsp; told me it could not built a feature.&amp;nbsp;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;-John&lt;/P&gt;</description>
      <pubDate>Mon, 19 Feb 2018 15:05:14 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7788908#M2301</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-02-19T15:05:14Z</dc:date>
    </item>
    <item>
      <title>Re: Milling helical gear teeth on a turn mill</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7788919#M2302</link>
      <description>&lt;P&gt;Hi,&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Could it be something like this?&lt;/P&gt;
&lt;P&gt;&lt;A href="http://autode.sk/2Cv5Roq" target="_blank"&gt;http://autode.sk/2Cv5Roq&lt;/A&gt;&lt;/P&gt;</description>
      <pubDate>Mon, 19 Feb 2018 15:08:01 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7788919#M2302</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-02-19T15:08:01Z</dc:date>
    </item>
    <item>
      <title>Re: Milling helical gear teeth on a turn mill</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7788927#M2303</link>
      <description>&lt;P&gt;Hi,&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Can you share a part?&lt;/P&gt;</description>
      <pubDate>Mon, 19 Feb 2018 15:09:25 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7788927#M2303</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-02-19T15:09:25Z</dc:date>
    </item>
    <item>
      <title>Re: Milling helical gear teeth on a turn mill</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7788942#M2304</link>
      <description>&lt;P&gt;It says this screencast is unlisted.&amp;nbsp; I don't see anything.&lt;/P&gt;</description>
      <pubDate>Mon, 19 Feb 2018 15:14:15 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7788942#M2304</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-02-19T15:14:15Z</dc:date>
    </item>
    <item>
      <title>Re: Milling helical gear teeth on a turn mill</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7788962#M2305</link>
      <description>It should be ready now</description>
      <pubDate>Mon, 19 Feb 2018 15:19:43 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7788962#M2305</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-02-19T15:19:43Z</dc:date>
    </item>
    <item>
      <title>Re: Milling helical gear teeth on a turn mill</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7789126#M2306</link>
      <description>&lt;P&gt;It is very difficult to see.&amp;nbsp; Can you give me a FC file I can simulate, from what little I can see it is something different.&amp;nbsp; I attached&amp;nbsp; a screenshot of how the part looks in the machine.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;-John&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Mon, 19 Feb 2018 16:02:08 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7789126#M2306</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-02-19T16:02:08Z</dc:date>
    </item>
    <item>
      <title>Re: Milling helical gear teeth on a turn mill</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7789758#M2307</link>
      <description>&lt;P&gt;Hi John,&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;This is what i can show you in this case. see the attached file.&lt;/P&gt;</description>
      <pubDate>Mon, 19 Feb 2018 19:39:00 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7789758#M2307</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-02-19T19:39:00Z</dc:date>
    </item>
    <item>
      <title>Re: Milling helical gear teeth on a turn mill</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7789840#M2308</link>
      <description>&lt;P&gt;J,&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;Sorry if I did not use the proper verbage, but we are looking at more of a pinion gear with a helix.&amp;nbsp; Were you able to open the pdf of the screenshot?&amp;nbsp; This gives a good look at the part with the helix gear teeth.&amp;nbsp; You might need to rotate the view after opening, as the gears are side by side, not one on top of the other.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;-John&lt;/P&gt;</description>
      <pubDate>Mon, 19 Feb 2018 20:16:07 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7789840#M2308</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-02-19T20:16:07Z</dc:date>
    </item>
    <item>
      <title>Re: Milling helical gear teeth on a turn mill</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7789853#M2309</link>
      <description>&lt;P&gt;Hi,&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Great now I see what you mean, I forgot to see in the pdf-file. Can you share the part?&lt;/P&gt;</description>
      <pubDate>Mon, 19 Feb 2018 20:21:44 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7789853#M2309</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-02-19T20:21:44Z</dc:date>
    </item>
    <item>
      <title>Re: Milling helical gear teeth on a turn mill</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7792797#M2316</link>
      <description>&lt;P&gt;Sorry for the delay.&amp;nbsp; Here is the part, loaded in FC.&lt;/P&gt;</description>
      <pubDate>Tue, 20 Feb 2018 18:57:41 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7792797#M2316</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-02-20T18:57:41Z</dc:date>
    </item>
    <item>
      <title>Re: Milling helical gear teeth on a turn mill</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7797882#M2323</link>
      <description>&lt;P&gt;Hi&amp;nbsp;@Anonymous&lt;/a&gt;,&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Thanks for supplying the part.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;I am able to create a toolpath using isoline method. As your primary requirement was C rotation, I have kept the tool axis &lt;STRONG&gt;To-line&lt;/STRONG&gt; so it should create a 4-axis toolpath. I am attaching the fm file for your reference.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Thank You.&lt;/P&gt;</description>
      <pubDate>Thu, 22 Feb 2018 03:50:34 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7797882#M2323</guid>
      <dc:creator>abhishek.juvekar</dc:creator>
      <dc:date>2018-02-22T03:50:34Z</dc:date>
    </item>
    <item>
      <title>Re: Milling helical gear teeth on a turn mill</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7798387#M2325</link>
      <description>&lt;P&gt;Hi @Anonymous&lt;/a&gt;,&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;I have got this result, but struggle to get the tool flipped in the right angle, maybe &lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/3948769"&gt;@abhishek.juvekar&lt;/a&gt; can assist here.&lt;/P&gt;
&lt;P&gt;&lt;A href="https://www.screencast.com/t/wuL4H9H2z" target="_blank"&gt;https://www.screencast.com/t/wuL4H9H2z&lt;/A&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;I attached the project here.&lt;/P&gt;</description>
      <pubDate>Thu, 22 Feb 2018 09:00:45 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7798387#M2325</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-02-22T09:00:45Z</dc:date>
    </item>
    <item>
      <title>Re: Milling helical gear teeth on a turn mill</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7802089#M2330</link>
      <description>&lt;P&gt;Hello&amp;nbsp;@Anonymous&lt;/a&gt;&amp;nbsp;and Jacob,&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;I could be wrong but I am not sure if we can do this with wrapped feature because nature of the side walls of gear tooth are not straight or fixed tapered. Due to the nature of surface of the wall, I&amp;nbsp;can only think of&amp;nbsp;surface milling feature with to-line axis to generate true 4-axis toolpath.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Thank You.&lt;/P&gt;</description>
      <pubDate>Fri, 23 Feb 2018 05:40:23 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7802089#M2330</guid>
      <dc:creator>abhishek.juvekar</dc:creator>
      <dc:date>2018-02-23T05:40:23Z</dc:date>
    </item>
    <item>
      <title>Re: Milling helical gear teeth on a turn mill</title>
      <link>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7802687#M2332</link>
      <description>&lt;P&gt;Yes, I got the same fix from FC tech and we are missing the fact that the sides of the gear teeth are on a radii.&amp;nbsp; I can do a standard surf mill, but my boss is determined to use the sides of the end mill and cut along the Z axis!&lt;/P&gt;</description>
      <pubDate>Fri, 23 Feb 2018 11:31:22 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/featurecam-forum/milling-helical-gear-teeth-on-a-turn-mill/m-p/7802687#M2332</guid>
      <dc:creator>Anonymous</dc:creator>
      <dc:date>2018-02-23T11:31:22Z</dc:date>
    </item>
  </channel>
</rss>

