topic Re: Problem with 3D model in antenna dish in ReMake Forum

Problem with 3D model in antenna dish

Anonymous — Mon, 09 Nov 2015 14:30:54 GMT

Hi, I'm trying to do a 3D model with part of antenna dish. I put some stitches to help with the reference, as you can see in the model attached.
But the model stays with a lot of holes in the antenna. Only the places where has the stitches doesn't stayed with holes.
I already tried to control the light to not create none reflection, but didn't work.
I really don't know what I can do to make this project good.
Thank you,

Fernando

Re: Problem with 3D model in antenna dish

TatjanaDzambazova — Fri, 13 Nov 2015 04:45:38 GMT

Hiya! do you mind sharing the photos with us? go to 360.autodesk.com find the project folder, right click on it and share with tatjana.dzambazova@autodesk.com

will take a look and let you know if you can do anything better

thanks

Re: Problem with 3D model in antenna dish

Anonymous — Fri, 13 Nov 2015 13:42:11 GMT

Hi man,

Thank you for the help. I already shared the project with you. Please, let me know if you receive OK.

I already did a 3D project with tomato sauce tin can, just to test the program. And worked. The tin can has a lot of drawings all over it, I think thats help Memento with reference.

But this antenna, always has big holes in 3D projects.

Once more, thank you.

Fernando

Re: Problem with 3D model in antenna dish

Anonymous — Fri, 04 Dec 2015 10:53:11 GMT

Hi,

Sorry for ask again.

Did you find the reason why my parabolic dish didn't became well in 3D model?

Thank you again,

Bests Regards,

Fernando

Re: Problem with 3D model in antenna dish

Anonymous — Fri, 04 Dec 2015 10:54:36 GMT

Hi,

Sorry for ask again...

Did you find the reason why my parabolic dish didn't became well in 3D model?

Thank you again,

Bests Regards,

Fernando

Re: Problem with 3D model in antenna dish

TatjanaDzambazova — Tue, 08 Dec 2015 08:20:01 GMT

fernando, thousand apologiez for the delay!

your shares went to my junk mail and i never saw them :(. i am downlaing the RCM il enow but what i need to see are the images - to share th eimages, go to 360.autodesk.com, find the folder, DONT OPEN THE FOLDER< just right clieck on it, and say SHARE with tatjana.dzambazova@autodesk.com and give me download rights

in general, geometrical surfaces that dont have many fetures, colors, etc are a bit hard for photogrammetry but let m etake a look at your photos and tell you if there is anything to do to help it!
thanks again and sorry for the deay!

tanja

Re: Problem with 3D model in antenna dish

Anonymous — Thu, 10 Dec 2015 17:04:57 GMT

Hi Tatjana,

No problem for the delay. I shared two folders, there are two versions. I tried to put more references and put my antenna in vertical.

Thank you for help, I really need this.

Best Regards,

Fernando

Re: Problem with 3D model in antenna dish

TatjanaDzambazova — Thu, 10 Dec 2015 19:49:36 GMT

Hi Fernando. got them now, downloading. do send me an email at tatjana.dzambazova@autodesk.com so i can follow up. thanks!