<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic Re: Simulation is fine but post gives a: Tool orientation not supported in Fusion Manufacture</title>
    <link>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8382098#M53575</link>
    <description>&lt;P&gt;Hi Bertho,&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;I believe you haven't setup your Work Coordinate System (WCS) yet.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;Per the attached screen shot your Setup has is equal to the model's coordinate system which is on the side of the part.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;For 3 axis milling it has to have the Z-Axis in alignment with your tool in the spindle.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;The second image shows how I set it up and it successfully posted.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;Hope this helps.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;Jay&lt;/P&gt;</description>
    <pubDate>Tue, 06 Nov 2018 04:47:13 GMT</pubDate>
    <dc:creator>Jay.Perez</dc:creator>
    <dc:date>2018-11-06T04:47:13Z</dc:date>
    <item>
      <title>Simulation is fine but post gives a: Tool orientation not supported</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8381973#M53570</link>
      <description>&lt;P&gt;While trying to mill a pocket or a trace in an existing box I am getting an Error:&lt;/P&gt;&lt;P&gt;Tool orientation is not supported.&lt;BR /&gt;Error at line: 405&lt;BR /&gt;Error in operation: 'Trace2'&lt;BR /&gt;Failed while processing onSection() for record 293.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;I got the box cad model from the vendor.&lt;/P&gt;&lt;P&gt;I created a similar block with a pocket and it posts just fine.&lt;/P&gt;&lt;P&gt;I am using the Mach3Mill post with default values&lt;/P&gt;&lt;P&gt;I have spent hours trying everything that I can think of without any luck.&amp;nbsp; I am probably missing something obvious.&lt;/P&gt;</description>
      <pubDate>Tue, 06 Nov 2018 02:29:19 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8381973#M53570</guid>
      <dc:creator>Bertho_Boman</dc:creator>
      <dc:date>2018-11-06T02:29:19Z</dc:date>
    </item>
    <item>
      <title>Re: Simulation is fine but post gives a: Tool orientation not supported</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8382098#M53575</link>
      <description>&lt;P&gt;Hi Bertho,&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;I believe you haven't setup your Work Coordinate System (WCS) yet.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;Per the attached screen shot your Setup has is equal to the model's coordinate system which is on the side of the part.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;For 3 axis milling it has to have the Z-Axis in alignment with your tool in the spindle.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;The second image shows how I set it up and it successfully posted.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;Hope this helps.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;Jay&lt;/P&gt;</description>
      <pubDate>Tue, 06 Nov 2018 04:47:13 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8382098#M53575</guid>
      <dc:creator>Jay.Perez</dc:creator>
      <dc:date>2018-11-06T04:47:13Z</dc:date>
    </item>
    <item>
      <title>Re: Simulation is fine but post gives a: Tool orientation not supported</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8382123#M53576</link>
      <description>&lt;P&gt;I agree that it probably has something to do with the coordinate system.&amp;nbsp; I have tried all variations and also redefining what view is "top".&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;The picture is what I think it should be (like yours) and it does not work regardless if locked to the center or to a corner.&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;It is also confusing that simulation works.&lt;/P&gt;</description>
      <pubDate>Tue, 06 Nov 2018 05:07:52 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8382123#M53576</guid>
      <dc:creator>Bertho_Boman</dc:creator>
      <dc:date>2018-11-06T05:07:52Z</dc:date>
    </item>
    <item>
      <title>Re: Simulation is fine but post gives a: Tool orientation not supported</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8382163#M53579</link>
      <description>&lt;P&gt;You have the WCS set in the toolpath remove that and set it in the setup and it is fine.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;You only set the WCS in the toolpath if it is for 4 or 5 axis toolpaths on a different plane to the setup WCS.&lt;/P&gt;</description>
      <pubDate>Tue, 06 Nov 2018 06:08:14 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8382163#M53579</guid>
      <dc:creator>daniel_lyall</dc:creator>
      <dc:date>2018-11-06T06:08:14Z</dc:date>
    </item>
    <item>
      <title>Re: Simulation is fine but post gives a: Tool orientation not supported</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8383295#M53589</link>
      <description>&lt;P&gt;Thank You!&lt;/P&gt;&lt;P&gt;The CAD model that I received had the Z axis "sideways" and I thought I just had to define the surface to machine by clicking on the desired "Z face".&amp;nbsp; &amp;nbsp;I eventually used the MOVE command to rotate Z in the desired direction and then there was no need to define the Z axis in the setup.&lt;/P&gt;&lt;P&gt;That is confusing though to me since it looks correct and I would expect it to work that way: Define what surface to machine.&amp;nbsp; &amp;nbsp;I am learning...&lt;/P&gt;&lt;P&gt;That brings up a related Question:&amp;nbsp; If I need to machine a second surface, do I have to go back and rotate the Z axis again.&amp;nbsp; Will the part not be also moved in sub-assemblies if I mess with the origin?&lt;/P&gt;&lt;P&gt;I need to watch your YouTube videos.&lt;/P&gt;</description>
      <pubDate>Tue, 06 Nov 2018 14:57:06 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8383295#M53589</guid>
      <dc:creator>Bertho_Boman</dc:creator>
      <dc:date>2018-11-06T14:57:06Z</dc:date>
    </item>
    <item>
      <title>Re: Simulation is fine but post gives a: Tool orientation not supported</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8383514#M53595</link>
      <description>&lt;P&gt;It matter not which way your part is sitting in Fusion (Model or CAM workspace).&lt;/P&gt;
&lt;P&gt;When you create a Setup, do not default to "Model Orientation". Rather, choose the "Select Z plane and X axis"&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="2018-11-06_11h28_09.png" style="width: 280px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/566278i2DB4659846E1A368/image-size/large?v=v2&amp;amp;px=999" role="button" title="2018-11-06_11h28_09.png" alt="2018-11-06_11h28_09.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;You then select the surface that is "normal" to the Z axis of your machine, and the edge that would be running along the "X" axis&lt;/P&gt;</description>
      <pubDate>Tue, 06 Nov 2018 16:29:35 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8383514#M53595</guid>
      <dc:creator>LibertyMachine</dc:creator>
      <dc:date>2018-11-06T16:29:35Z</dc:date>
    </item>
    <item>
      <title>Re: Simulation is fine but post gives a: Tool orientation not supported</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8383734#M53598</link>
      <description>&lt;P&gt;I have been doing what you describe and I thought it would work but it did not.&amp;nbsp; Maybe it has to do with the Mach3 post that is limited to three axis.&amp;nbsp; Also the CAD model was downloaded so that might have something to do with it.&amp;nbsp; Removing the origin setup from the tool path and "correcting" the basic model I get no errors.&lt;/P&gt;&lt;P&gt;I need to read and watch more YouTube videos since I might be making some obvious error.&lt;/P&gt;</description>
      <pubDate>Tue, 06 Nov 2018 17:48:07 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8383734#M53598</guid>
      <dc:creator>Bertho_Boman</dc:creator>
      <dc:date>2018-11-06T17:48:07Z</dc:date>
    </item>
    <item>
      <title>Re: Simulation is fine but post gives a: Tool orientation not supported</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8384112#M53613</link>
      <description>&lt;P&gt;The Mach3 post only puts out multi-axis moves if it is set in the pre-post&amp;nbsp;dialog.&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="4th axis along.png" style="width: 607px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/566386i2C5C6AA178B3474A/image-size/large?v=v2&amp;amp;px=999" role="button" title="4th axis along.png" alt="4th axis along.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;You have to&amp;nbsp;set the WCS in the in the setup otherwise you will have problems as you have seen.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;When doing the cam in Fusion it does not matter one bit what way around the model is, you set the Z with the WCS in the setup, then if it is a multi-axis toolpath that is needed you set it in the toolpath only if it is different to the setup.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;All this is in the support&amp;nbsp;&amp;amp; learning at the top of the Fusion&amp;nbsp;forum page.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Tue, 06 Nov 2018 19:49:23 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8384112#M53613</guid>
      <dc:creator>daniel_lyall</dc:creator>
      <dc:date>2018-11-06T19:49:23Z</dc:date>
    </item>
    <item>
      <title>Re: Simulation is fine but post gives a: Tool orientation not supported</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8384580#M53634</link>
      <description>&lt;P&gt;Thanks again Daniel.&lt;/P&gt;&lt;P&gt;I will be watching your videos.&lt;/P&gt;&lt;P&gt;Bertho&lt;/P&gt;</description>
      <pubDate>Tue, 06 Nov 2018 23:25:49 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8384580#M53634</guid>
      <dc:creator>Bertho_Boman</dc:creator>
      <dc:date>2018-11-06T23:25:49Z</dc:date>
    </item>
    <item>
      <title>Re: Simulation is fine but post gives a: Tool orientation not supported</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8399895#M53922</link>
      <description>&lt;P&gt;hi i am trying to do tool orientation i wont to machine a scale car with a 3 axis milling machine (post and arm )&lt;/P&gt;&lt;P&gt;i need to do roof 0 or in z then turn head ( manually ) 45 then 90&lt;/P&gt;&lt;P&gt;then i need to do it from front and back of car is there any one who can help me thanks steve&amp;nbsp;&lt;/P&gt;&lt;P&gt;i am using fusion 360 and mach3 mill&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Tue, 13 Nov 2018 21:36:45 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/simulation-is-fine-but-post-gives-a-tool-orientation-not/m-p/8399895#M53922</guid>
      <dc:creator>stephen.brindle</dc:creator>
      <dc:date>2018-11-13T21:36:45Z</dc:date>
    </item>
  </channel>
</rss>

