<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic Re: DCMT tip specification. in Fusion Manufacture</title>
    <link>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12752406#M157733</link>
    <description>&lt;P&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/6965551"&gt;@seth.madore&lt;/a&gt;&amp;nbsp;Another problem I ran into a while ago, I needed to bore a undercut and keep the corner as sharp as possible. The only tool I could find was a small internal threading boring bar (&lt;A href="https://www.protool-ltd.co.uk/products/mir6l22a60bxc" target="_blank" rel="noopener"&gt;See here&lt;/A&gt;, the picture on the page is wrong, it's a 60°with a 0.05mm corner rad). I set the tool up as an internal threading tool but Fusion wouldn't let me use it for profiling, don't see why this should be blocked no real reason why you can't turn with a thread insert.&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="HughesTooling_0-1714818417588.png" style="width: 600px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1358224i92A3A40BE6575A5B/image-size/medium?v=v2&amp;amp;px=400" role="button" title="HughesTooling_0-1714818417588.png" alt="HughesTooling_0-1714818417588.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;In the end I had to set it up like this.&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="HughesTooling_1-1714818618108.png" style="width: 999px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1358225i6ADBCDABA18A69EB/image-size/large?v=v2&amp;amp;px=999" role="button" title="HughesTooling_1-1714818618108.png" alt="HughesTooling_1-1714818618108.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
    <pubDate>Sat, 04 May 2024 10:32:06 GMT</pubDate>
    <dc:creator>HughesTooling</dc:creator>
    <dc:date>2024-05-04T10:32:06Z</dc:date>
    <item>
      <title>DCMT tip specification.</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12741373#M157371</link>
      <description>&lt;P&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/4427489"&gt;@akash.kamoolkar&lt;/a&gt;&amp;nbsp;With a DCMT tip set up like this is it assumed the radius is the same on all 4 corners? It seems pretty close on the tips I'm using but wonder if it should have some fine adjustment. I prefer setting up like this so it's easy to check the depth the tool is going to move (Z axis).&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="HughesTooling_0-1714404611317.png" style="width: 600px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1356125i6297FA20A37A9C92/image-size/medium?v=v2&amp;amp;px=400" role="button" title="HughesTooling_0-1714404611317.png" alt="HughesTooling_0-1714404611317.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;I sketched up a tip with 0.2 rads all corners and get this. The actual tip measures 7.125mm but wonder if this is consistent with different radii and is this how you are calculating the width of the tip in the tool library?&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="HughesTooling_1-1714404872463.png" style="width: 600px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1356127i39785B6E069FE25D/image-size/medium?v=v2&amp;amp;px=400" role="button" title="HughesTooling_1-1714404872463.png" alt="HughesTooling_1-1714404872463.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;Also is there any progress on making the holders correct for tips in this orientation?&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="HughesTooling_2-1714405221541.png" style="width: 600px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1356134iF6AA3E98E4CF7771/image-size/medium?v=v2&amp;amp;px=400" role="button" title="HughesTooling_2-1714405221541.png" alt="HughesTooling_2-1714405221541.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Thanks Mark&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Mon, 29 Apr 2024 15:42:23 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12741373#M157371</guid>
      <dc:creator>HughesTooling</dc:creator>
      <dc:date>2024-04-29T15:42:23Z</dc:date>
    </item>
    <item>
      <title>Re: DCMT tip specification.</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12750837#M157682</link>
      <description>&lt;P&gt;A) Yes, the radii are applied to all corners&lt;/P&gt;
&lt;P&gt;B/C) We've done some internal work to place the Tip Tangent where it's supposed to be:&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="2024-05-03_09h43_58.png" style="width: 999px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1357971iD8EA450EEE2687BF/image-size/large?v=v2&amp;amp;px=999" role="button" title="2024-05-03_09h43_58.png" alt="2024-05-03_09h43_58.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt; &lt;/P&gt;</description>
      <pubDate>Fri, 03 May 2024 13:44:09 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12750837#M157682</guid>
      <dc:creator>seth.madore</dc:creator>
      <dc:date>2024-05-03T13:44:09Z</dc:date>
    </item>
    <item>
      <title>Re: DCMT tip specification.</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12750881#M157686</link>
      <description>&lt;BLOCKQUOTE&gt;&lt;HR /&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/6965551"&gt;@seth.madore&lt;/a&gt;&amp;nbsp;wrote:&lt;BR /&gt;
&lt;P&gt;A) Yes, the radii are applied to all corners&lt;/P&gt;
&lt;P&gt;B/C) We've done some internal work to place the Tip Tangent where it's supposed to be:&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="2024-05-03_09h43_58.png" style="width: 999px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1357971iD8EA450EEE2687BF/image-size/large?v=v2&amp;amp;px=999" role="button" title="2024-05-03_09h43_58.png" alt="2024-05-03_09h43_58.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt; &lt;/P&gt;
&lt;HR /&gt;&lt;/BLOCKQUOTE&gt;
&lt;P&gt;Thanks Seth. Is that image how Tip Tangent is going to be in the future? Will the existing Tip Tangent be an option still?&lt;/P&gt;
&lt;P&gt;I prefer the existing tip tangent as the max Z will be the end of the tool so easier to see the max depth. I know the simulation should be enough but I still like to double check the numbers in the code. Any work on improving the holder so it doesn't protrude past the tip?&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="HughesTooling_0-1714744848742.png" style="width: 600px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1357975iFC995031C27BD61B/image-size/medium?v=v2&amp;amp;px=400" role="button" title="HughesTooling_0-1714744848742.png" alt="HughesTooling_0-1714744848742.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Fri, 03 May 2024 14:02:12 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12750881#M157686</guid>
      <dc:creator>HughesTooling</dc:creator>
      <dc:date>2024-05-03T14:02:12Z</dc:date>
    </item>
    <item>
      <title>Re: DCMT tip specification.</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12751219#M157703</link>
      <description>&lt;P&gt;Yes, the image shown is what users would see in the near future. No, I don't believe that there's an option to retain the old method as you prefer. It's possible that we could add a new compensation point, but I don't think there's going to be much bandwidth for that development work at present.&lt;/P&gt;</description>
      <pubDate>Fri, 03 May 2024 16:23:35 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12751219#M157703</guid>
      <dc:creator>seth.madore</dc:creator>
      <dc:date>2024-05-03T16:23:35Z</dc:date>
    </item>
    <item>
      <title>Re: DCMT tip specification.</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12751254#M157704</link>
      <description>&lt;P&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/6965551"&gt;@seth.madore&lt;/a&gt;&amp;nbsp; Going to be dangerous for existing toolpaths?&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Is there going to be a change for threading tips as well? Hope not as it feels a lot safer knowing the end ot the tip is the max point when coming upto a shoulder.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Fri, 03 May 2024 16:42:10 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12751254#M157704</guid>
      <dc:creator>HughesTooling</dc:creator>
      <dc:date>2024-05-03T16:42:10Z</dc:date>
    </item>
    <item>
      <title>Re: DCMT tip specification.</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12751288#M157705</link>
      <description>&lt;P&gt;No, it does not appear so:&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="2024-05-03_12h53_47.png" style="width: 999px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1358049i97497DB44DE238A5/image-size/large?v=v2&amp;amp;px=999" role="button" title="2024-05-03_12h53_47.png" alt="2024-05-03_12h53_47.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;I seem to recall some discussion and uncertainty around where "compensation point" should be on turning tools that are oriented as you show above. I'll have to dig thru the notes and see what the resolution was..&lt;/P&gt;</description>
      <pubDate>Fri, 03 May 2024 16:59:33 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12751288#M157705</guid>
      <dc:creator>seth.madore</dc:creator>
      <dc:date>2024-05-03T16:59:33Z</dc:date>
    </item>
    <item>
      <title>Re: DCMT tip specification.</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12751590#M157721</link>
      <description>&lt;P&gt;How do you expect to touch off neutral tool holders for OD? Currently in Production, we're given this:&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="2024-05-03_14h57_19.png" style="width: 999px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1358128i0B9A3C6C751FB461/image-size/large?v=v2&amp;amp;px=999" role="button" title="2024-05-03_14h57_19.png" alt="2024-05-03_14h57_19.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;While ID is given this:&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="Boring Bar (ID).png" style="width: 999px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1358130iD66F5EC877814318/image-size/large?v=v2&amp;amp;px=999" role="button" title="Boring Bar (ID).png" alt="Boring Bar (ID).png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;Grooving tools get this:&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="2024-05-03_15h14_46.png" style="width: 999px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1358133i1357DD8A878475D2/image-size/large?v=v2&amp;amp;px=999" role="button" title="2024-05-03_15h14_46.png" alt="2024-05-03_15h14_46.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;And R/L holders for round inserts (neutral is same as my first image) gives this:&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="2024-05-03_15h15_41.png" style="width: 600px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1358134i5C9B20199D53C1AB/image-size/medium?v=v2&amp;amp;px=400" role="button" title="2024-05-03_15h15_41.png" alt="2024-05-03_15h15_41.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt; &lt;/P&gt;
&lt;P&gt; &lt;/P&gt;
&lt;P&gt; &lt;/P&gt;
&lt;P&gt; &lt;/P&gt;</description>
      <pubDate>Fri, 03 May 2024 19:16:41 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12751590#M157721</guid>
      <dc:creator>seth.madore</dc:creator>
      <dc:date>2024-05-03T19:16:41Z</dc:date>
    </item>
    <item>
      <title>Re: DCMT tip specification.</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12752316#M157727</link>
      <description>&lt;BLOCKQUOTE&gt;&lt;HR /&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/6965551"&gt;@seth.madore&lt;/a&gt;&amp;nbsp;wrote:&lt;BR /&gt;
&lt;P&gt;How do you expect to touch off neutral tool holders for OD? Currently in Production, we're given this:&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="2024-05-03_14h57_19.png" style="width: 999px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1358128i0B9A3C6C751FB461/image-size/large?v=v2&amp;amp;px=999" role="button" title="2024-05-03_14h57_19.png" alt="2024-05-03_14h57_19.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;HR /&gt;&lt;/BLOCKQUOTE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Been awhile since setting up a tool like that but I think when setting the tool on the lathe I've touched off using the corner of the tip then moved the Z half the measured width of the tool and set the tool Z zero. Done like this probably a bit more accurate as you measure the tip.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;I guess the thing about boring tools is you can't see what's going on so having the point how it is now you you see the maximum Z depth in the code and on the control as it's cutting. With the new tip tangent you need to remember the tool will be 2 or 3mm deeper. Pretty much everything I do is a one off and I drill the holes manually with the tail stock so the first one is always a bit tense!&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Sat, 04 May 2024 08:42:30 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12752316#M157727</guid>
      <dc:creator>HughesTooling</dc:creator>
      <dc:date>2024-05-04T08:42:30Z</dc:date>
    </item>
    <item>
      <title>Re: DCMT tip specification.</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12752333#M157729</link>
      <description>&lt;P&gt;So you would hope/expect that we allowed ID tools to be defined differently (for Tip Tangent points) than OD tools, when insert is set to neutral? I've been looking for a neutral insert aligned boring bar and coming up empty, could you link me one that you're using?&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;BLOCKQUOTE&gt;&lt;HR /&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/2782855"&gt;@HughesTooling&lt;/a&gt;&amp;nbsp;wrote:
&lt;P class="1714813425400"&gt;&amp;nbsp;&lt;/P&gt;
&lt;SPAN&gt;Been awhile since setting up a tool like that but I think when setting the tool on the lathe I've touched off using the corner of the tip then moved the Z half the measured width of the tool and set the tool Z zero. Done like this probably a bit more accurate as you measure the tip.&lt;/SPAN&gt;&lt;/BLOCKQUOTE&gt;
&lt;HR /&gt;
&lt;P&gt;For ID and OD tools, I would also measure the distance on my optical comparator, touch off my tools and input the shift in my tool offsets.&lt;/P&gt;</description>
      <pubDate>Sat, 04 May 2024 09:04:34 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12752333#M157729</guid>
      <dc:creator>seth.madore</dc:creator>
      <dc:date>2024-05-04T09:04:34Z</dc:date>
    </item>
    <item>
      <title>Re: DCMT tip specification.</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12752383#M157730</link>
      <description>&lt;P&gt;&lt;A href="https://www.cutwel.co.uk/lathe-tools/iso-turning-inserts-tool-holders-boring-bars/boring-bars/boring-bars-for-dc-style-inserts/s12k-s-sd-cr-steel-shank-62-5-deg-boring-bar-for-dcmt07-dcgt07-inserts-teknik-k170" target="_blank" rel="noopener"&gt;This is the tool I used&lt;/A&gt;. I ground away the end of the holder so I could touch off using the tip. I guess I could have measured from the end of the holder to the tip midpoint on a shadowgraph but would have been a bit fiddly centring on the tip.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;BLOCKQUOTE&gt;&lt;HR /&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/6965551"&gt;@seth.madore&lt;/a&gt;&amp;nbsp;wrote:&lt;BR /&gt;
&lt;P&gt;So you would hope/expect that we allowed ID tools to be defined differently (for Tip Tangent points) than OD tools, when insert is set to neutral?&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;HR /&gt;&lt;/BLOCKQUOTE&gt;
&lt;P&gt;I guess having it consistent for ID and OD is best in the long run but what is going to happen to existing toolpaths? If there is going to be a change in how it works will there be warnings the tangent point has changed? You'll need warning when creating new toolpaths with an existing tool and warning if you regenerate existing programs.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Sat, 04 May 2024 10:05:10 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12752383#M157730</guid>
      <dc:creator>HughesTooling</dc:creator>
      <dc:date>2024-05-04T10:05:10Z</dc:date>
    </item>
    <item>
      <title>Re: DCMT tip specification.</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12752394#M157731</link>
      <description>&lt;P&gt;Just remembered, I'm pretty sure this graphic is wrong, it should be like I've sketched in red.&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="HughesTooling_0-1714817885160.png" style="width: 600px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1358221i7EE992CF87A250CE/image-size/medium?v=v2&amp;amp;px=400" role="button" title="HughesTooling_0-1714817885160.png" alt="HughesTooling_0-1714817885160.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Sat, 04 May 2024 10:18:42 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12752394#M157731</guid>
      <dc:creator>HughesTooling</dc:creator>
      <dc:date>2024-05-04T10:18:42Z</dc:date>
    </item>
    <item>
      <title>Re: DCMT tip specification.</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12752401#M157732</link>
      <description>&lt;BLOCKQUOTE&gt;&lt;HR /&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/2782855"&gt;@HughesTooling&lt;/a&gt;&amp;nbsp;wrote:&lt;BR /&gt;
&lt;P&gt;Just remembered, I'm pretty sure this graphic is wrong, it should be like I've sketched in red.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;HR /&gt;&lt;/BLOCKQUOTE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;For...insert size? Is that accurate, isn't it the Inscribed Circle? (either way, the current graphic would be wrong)&lt;/P&gt;</description>
      <pubDate>Sat, 04 May 2024 10:25:20 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12752401#M157732</guid>
      <dc:creator>seth.madore</dc:creator>
      <dc:date>2024-05-04T10:25:20Z</dc:date>
    </item>
    <item>
      <title>Re: DCMT tip specification.</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12752406#M157733</link>
      <description>&lt;P&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/6965551"&gt;@seth.madore&lt;/a&gt;&amp;nbsp;Another problem I ran into a while ago, I needed to bore a undercut and keep the corner as sharp as possible. The only tool I could find was a small internal threading boring bar (&lt;A href="https://www.protool-ltd.co.uk/products/mir6l22a60bxc" target="_blank" rel="noopener"&gt;See here&lt;/A&gt;, the picture on the page is wrong, it's a 60°with a 0.05mm corner rad). I set the tool up as an internal threading tool but Fusion wouldn't let me use it for profiling, don't see why this should be blocked no real reason why you can't turn with a thread insert.&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="HughesTooling_0-1714818417588.png" style="width: 600px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1358224i92A3A40BE6575A5B/image-size/medium?v=v2&amp;amp;px=400" role="button" title="HughesTooling_0-1714818417588.png" alt="HughesTooling_0-1714818417588.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;In the end I had to set it up like this.&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="HughesTooling_1-1714818618108.png" style="width: 999px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1358225i6ADBCDABA18A69EB/image-size/large?v=v2&amp;amp;px=999" role="button" title="HughesTooling_1-1714818618108.png" alt="HughesTooling_1-1714818618108.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Sat, 04 May 2024 10:32:06 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12752406#M157733</guid>
      <dc:creator>HughesTooling</dc:creator>
      <dc:date>2024-05-04T10:32:06Z</dc:date>
    </item>
    <item>
      <title>Re: DCMT tip specification.</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12752408#M157734</link>
      <description>&lt;BLOCKQUOTE&gt;&lt;HR /&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/6965551"&gt;@seth.madore&lt;/a&gt;&amp;nbsp;wrote:&lt;BR /&gt;
&lt;BLOCKQUOTE&gt;&lt;HR /&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/2782855"&gt;@HughesTooling&lt;/a&gt;&amp;nbsp;wrote:&lt;BR /&gt;
&lt;P&gt;Just remembered, I'm pretty sure this graphic is wrong, it should be like I've sketched in red.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;HR /&gt;&lt;/BLOCKQUOTE&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;For...insert size? Is that accurate, isn't it the Inscribed Circle? (either way, the current graphic would be wrong)&lt;/P&gt;
&lt;HR /&gt;&lt;/BLOCKQUOTE&gt;
&lt;P&gt;The Inscribed circle is 6.35mm for this size tip, this would work the way the graphic is but then the size in the menu's wrong.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Sat, 04 May 2024 10:35:17 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/dcmt-tip-specification/m-p/12752408#M157734</guid>
      <dc:creator>HughesTooling</dc:creator>
      <dc:date>2024-05-04T10:35:17Z</dc:date>
    </item>
  </channel>
</rss>

