<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic Re: Tool offset won't change when adjusting on control in Fusion Manufacture</title>
    <link>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11317013#M125230</link>
    <description>&lt;P&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/9856084"&gt;@jimMA3D3&lt;/a&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;The finishing operation after the M00 stop is not set to the "In Control" option so therefore it is likely that the Post Processor is not outputting the "tool offset call", usually either a G41 or a G42, in your case it is likely to be a G42.&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;Without your specific Post Processor (I used the Doosan PP with Puma option) I may not have it exact but the image of the code shown in the second image does show that the "tool offset" is being "called" by the G42 line of code when the Finishing Operation is set to the "In Control" option, see images below.&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;Hope this is of some help &lt;img class="lia-deferred-image lia-image-emoji" src="https://forums.autodesk.com/html/@D5D66E11BC96A1C8427F98151D3E9A7A/emoticons/1f642.png" alt=":slightly_smiling_face:" title=":slightly_smiling_face:" /&gt;&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-center" image-alt="Compensation set to &amp;quot;In Control&amp;quot; gives you code in second image" style="width: 600px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1095592i2E2BD5428D79B061/image-size/medium?v=v2&amp;amp;px=400" role="button" title="hammer mill spreader-1.jpg" alt="Compensation set to &amp;quot;In Control&amp;quot; gives you code in second image" /&gt;&lt;span class="lia-inline-image-caption" onclick="event.preventDefault();"&gt;Compensation set to "In Control" gives you code in second image&lt;/span&gt;&lt;/span&gt;&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-center" image-alt="Note the G42 line of code" style="width: 403px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1095593iA205FA8A77CA9901/image-size/medium?v=v2&amp;amp;px=400" role="button" title="hammer mill spreaded-2.jpg" alt="Note the G42 line of code" /&gt;&lt;span class="lia-inline-image-caption" onclick="event.preventDefault();"&gt;Note the G42 line of code&lt;/span&gt;&lt;/span&gt;&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
    <pubDate>Sun, 24 Jul 2022 22:39:14 GMT</pubDate>
    <dc:creator>engineguy</dc:creator>
    <dc:date>2022-07-24T22:39:14Z</dc:date>
    <item>
      <title>Tool offset won't change when adjusting on control</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11316257#M125198</link>
      <description>&lt;P&gt;Hi ,&lt;/P&gt;&lt;P&gt;&amp;nbsp;Machining a shaft and have added&amp;nbsp; a pass through M00( Measure) so I can adjust my finish cut if needed. I make my adjustments on machine control, cycle start. the&amp;nbsp; size still the same. I notice in the post it doesn't call the tool for the finish cycle. It starts where it left off. Is there&amp;nbsp; away to make you adjustment&amp;nbsp; then run finish cycle in the Step up in fusion 360.&lt;/P&gt;</description>
      <pubDate>Sun, 24 Jul 2022 02:11:28 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11316257#M125198</guid>
      <dc:creator>jimMA3D3</dc:creator>
      <dc:date>2022-07-24T02:11:28Z</dc:date>
    </item>
    <item>
      <title>Re: Tool offset won't change when adjusting on control</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11316442#M125203</link>
      <description>&lt;P&gt;Could you share your file so we can see the workflow? Also, what machine is this and what post processor are you using?&lt;/P&gt;</description>
      <pubDate>Sun, 24 Jul 2022 09:09:32 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11316442#M125203</guid>
      <dc:creator>seth.madore</dc:creator>
      <dc:date>2022-07-24T09:09:32Z</dc:date>
    </item>
    <item>
      <title>Re: Tool offset won't change when adjusting on control</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11316991#M125229</link>
      <description>&lt;P&gt;I have Doosan 280LM with fanuc i series control. The post processor is a one from Fusions Library Puma.I had a colleague modify it to work.&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Sun, 24 Jul 2022 22:01:48 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11316991#M125229</guid>
      <dc:creator>jimMA3D3</dc:creator>
      <dc:date>2022-07-24T22:01:48Z</dc:date>
    </item>
    <item>
      <title>Re: Tool offset won't change when adjusting on control</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11317013#M125230</link>
      <description>&lt;P&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/9856084"&gt;@jimMA3D3&lt;/a&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;The finishing operation after the M00 stop is not set to the "In Control" option so therefore it is likely that the Post Processor is not outputting the "tool offset call", usually either a G41 or a G42, in your case it is likely to be a G42.&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;Without your specific Post Processor (I used the Doosan PP with Puma option) I may not have it exact but the image of the code shown in the second image does show that the "tool offset" is being "called" by the G42 line of code when the Finishing Operation is set to the "In Control" option, see images below.&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;Hope this is of some help &lt;img class="lia-deferred-image lia-image-emoji" src="https://forums.autodesk.com/html/@D5D66E11BC96A1C8427F98151D3E9A7A/emoticons/1f642.png" alt=":slightly_smiling_face:" title=":slightly_smiling_face:" /&gt;&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-center" image-alt="Compensation set to &amp;quot;In Control&amp;quot; gives you code in second image" style="width: 600px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1095592i2E2BD5428D79B061/image-size/medium?v=v2&amp;amp;px=400" role="button" title="hammer mill spreader-1.jpg" alt="Compensation set to &amp;quot;In Control&amp;quot; gives you code in second image" /&gt;&lt;span class="lia-inline-image-caption" onclick="event.preventDefault();"&gt;Compensation set to "In Control" gives you code in second image&lt;/span&gt;&lt;/span&gt;&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-center" image-alt="Note the G42 line of code" style="width: 403px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1095593iA205FA8A77CA9901/image-size/medium?v=v2&amp;amp;px=400" role="button" title="hammer mill spreaded-2.jpg" alt="Note the G42 line of code" /&gt;&lt;span class="lia-inline-image-caption" onclick="event.preventDefault();"&gt;Note the G42 line of code&lt;/span&gt;&lt;/span&gt;&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Sun, 24 Jul 2022 22:39:14 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11317013#M125230</guid>
      <dc:creator>engineguy</dc:creator>
      <dc:date>2022-07-24T22:39:14Z</dc:date>
    </item>
    <item>
      <title>Re: Tool offset won't change when adjusting on control</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11317044#M125231</link>
      <description>&lt;P&gt;Thanks for your help. Will give it a go. Have another one for you. I have collision in groove cycle on pulley.&lt;/P&gt;</description>
      <pubDate>Sun, 24 Jul 2022 23:38:49 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11317044#M125231</guid>
      <dc:creator>jimMA3D3</dc:creator>
      <dc:date>2022-07-24T23:38:49Z</dc:date>
    </item>
    <item>
      <title>Re: Tool offset won't change when adjusting on control</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11317085#M125233</link>
      <description>&lt;P&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/9856084"&gt;@jimMA3D3&lt;/a&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;That would likely be because the tool cutting sideways at full depth and full width in a single move which Grooving tools don`t like to do &lt;img class="lia-deferred-image lia-image-emoji" src="https://forums.autodesk.com/html/@10938F92CF414E0A6D60B89C59F5569F/emoticons/1f61e.png" alt=":disappointed_face:" title=":disappointed_face:" /&gt;&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;Not likely that a 1mm tool would survive that move but you never know, what material?&amp;nbsp; &lt;img class="lia-deferred-image lia-image-emoji" src="https://forums.autodesk.com/html/@D5D66E11BC96A1C8427F98151D3E9A7A/emoticons/1f642.png" alt=":slightly_smiling_face:" title=":slightly_smiling_face:" /&gt;&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;However changing a few settings under the "Passes" tab as shown in the image below would make that Operation a lot easier on the Grooving tool, just a suggestion, it may look like an odd toolpath but should do a nice clean groove safely &lt;img class="lia-deferred-image lia-image-emoji" src="https://forums.autodesk.com/html/@D5D66E11BC96A1C8427F98151D3E9A7A/emoticons/1f642.png" alt=":slightly_smiling_face:" title=":slightly_smiling_face:" /&gt; &lt;img class="lia-deferred-image lia-image-emoji" src="https://forums.autodesk.com/html/@D5D66E11BC96A1C8427F98151D3E9A7A/emoticons/1f642.png" alt=":slightly_smiling_face:" title=":slightly_smiling_face:" /&gt; &lt;img class="lia-deferred-image lia-image-emoji" src="https://forums.autodesk.com/html/@D5D66E11BC96A1C8427F98151D3E9A7A/emoticons/1f642.png" alt=":slightly_smiling_face:" title=":slightly_smiling_face:" /&gt;&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;Hope this helps a little, that is the area to "play around in" for this stuff, modified file attached &lt;img class="lia-deferred-image lia-image-emoji" src="https://forums.autodesk.com/html/@D5D66E11BC96A1C8427F98151D3E9A7A/emoticons/1f642.png" alt=":slightly_smiling_face:" title=":slightly_smiling_face:" /&gt;&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-center" image-alt="Bagger belt pulley.jpg" style="width: 550px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1095597i89AA2F75977CCE39/image-size/medium?v=v2&amp;amp;px=400" role="button" title="Bagger belt pulley.jpg" alt="Bagger belt pulley.jpg" /&gt;&lt;/span&gt;&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Mon, 25 Jul 2022 00:51:51 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11317085#M125233</guid>
      <dc:creator>engineguy</dc:creator>
      <dc:date>2022-07-25T00:51:51Z</dc:date>
    </item>
    <item>
      <title>Re: Tool offset won't change when adjusting on control</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11317154#M125234</link>
      <description>&lt;P&gt;Thankyou for your help. Changed the finish cycle to control on the bagger pulley it changed to G41 not G42. Would it because internal machining vs External machining?&lt;/P&gt;</description>
      <pubDate>Mon, 25 Jul 2022 02:32:05 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11317154#M125234</guid>
      <dc:creator>jimMA3D3</dc:creator>
      <dc:date>2022-07-25T02:32:05Z</dc:date>
    </item>
    <item>
      <title>Re: Tool offset won't change when adjusting on control</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11317394#M125238</link>
      <description>&lt;P&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/9856084"&gt;@jimMA3D3&lt;/a&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;Yes, G41 for Internal would sound correct &lt;img class="lia-deferred-image lia-image-emoji" src="https://forums.autodesk.com/html/@D5D66E11BC96A1C8427F98151D3E9A7A/emoticons/1f642.png" alt=":slightly_smiling_face:" title=":slightly_smiling_face:" /&gt;&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;Without a copy of your Modified Post Processor I am not able to post the exact same code as you &lt;img class="lia-deferred-image lia-image-emoji" src="https://forums.autodesk.com/html/@D5D66E11BC96A1C8427F98151D3E9A7A/emoticons/1f642.png" alt=":slightly_smiling_face:" title=":slightly_smiling_face:" /&gt;&lt;/STRONG&gt;&lt;/P&gt;</description>
      <pubDate>Mon, 25 Jul 2022 06:25:28 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11317394#M125238</guid>
      <dc:creator>engineguy</dc:creator>
      <dc:date>2022-07-25T06:25:28Z</dc:date>
    </item>
    <item>
      <title>Re: Tool offset won't change when adjusting on control</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11319609#M125286</link>
      <description>&lt;P&gt;Have attached modified post.&lt;/P&gt;</description>
      <pubDate>Tue, 26 Jul 2022 00:36:24 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11319609#M125286</guid>
      <dc:creator>jimMA3D3</dc:creator>
      <dc:date>2022-07-26T00:36:24Z</dc:date>
    </item>
    <item>
      <title>Re: Tool offset won't change when adjusting on control</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11320364#M125309</link>
      <description>&lt;P&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/9856084"&gt;@jimMA3D3&lt;/a&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;You have uploaded the Fusion f3d file again which still has the Red Collision in the simulation.&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;Have you not tested the last Fusion file that I uploaded for you ??&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;What you need to attach is the Post Processor .cps file from your Post Processor Library.&lt;/STRONG&gt;&lt;/P&gt;</description>
      <pubDate>Tue, 26 Jul 2022 09:57:52 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11320364#M125309</guid>
      <dc:creator>engineguy</dc:creator>
      <dc:date>2022-07-26T09:57:52Z</dc:date>
    </item>
    <item>
      <title>Re: Tool offset won't change when adjusting on control</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11321969#M125400</link>
      <description>&lt;P&gt;Sorry about that. Have attached post.&lt;/P&gt;</description>
      <pubDate>Tue, 26 Jul 2022 21:27:17 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11321969#M125400</guid>
      <dc:creator>jimMA3D3</dc:creator>
      <dc:date>2022-07-26T21:27:17Z</dc:date>
    </item>
    <item>
      <title>Re: Tool offset won't change when adjusting on control</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11322065#M125401</link>
      <description>&lt;P&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/9856084"&gt;@jimMA3D3&lt;/a&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;That is just the G code file, which doesn`t have the offset call BTW.&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;The actual Post Processor from your Post Processor Library that you are using please &lt;img class="lia-deferred-image lia-image-emoji" src="https://forums.autodesk.com/html/@D5D66E11BC96A1C8427F98151D3E9A7A/emoticons/1f642.png" alt=":slightly_smiling_face:" title=":slightly_smiling_face:" /&gt; the .cps file.&lt;/STRONG&gt;&lt;/P&gt;</description>
      <pubDate>Tue, 26 Jul 2022 22:23:14 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11322065#M125401</guid>
      <dc:creator>engineguy</dc:creator>
      <dc:date>2022-07-26T22:23:14Z</dc:date>
    </item>
    <item>
      <title>Re: Tool offset won't change when adjusting on control</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11322185#M125402</link>
      <description>&lt;P&gt;Hi engineguy,&lt;/P&gt;&lt;P&gt;A colleague of mine modified the post processor. Not sure how to send you what you require. Could you show the steps how to do this?&lt;/P&gt;</description>
      <pubDate>Tue, 26 Jul 2022 23:34:02 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11322185#M125402</guid>
      <dc:creator>jimMA3D3</dc:creator>
      <dc:date>2022-07-26T23:34:02Z</dc:date>
    </item>
    <item>
      <title>Re: Tool offset won't change when adjusting on control</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11322672#M125405</link>
      <description>&lt;P&gt;Hi ,&lt;/P&gt;&lt;P&gt;I think I found what you require.&lt;/P&gt;</description>
      <pubDate>Wed, 27 Jul 2022 07:15:17 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11322672#M125405</guid>
      <dc:creator>jimMA3D3</dc:creator>
      <dc:date>2022-07-27T07:15:17Z</dc:date>
    </item>
    <item>
      <title>Re: Tool offset won't change when adjusting on control</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11322808#M125423</link>
      <description>&lt;P&gt;&lt;a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/9856084"&gt;@jimMA3D3&lt;/a&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;&lt;STRONG&gt;OK, that Post Processor seems to be producing good code so test it out carefully at the machine &lt;img class="lia-deferred-image lia-image-emoji" src="https://forums.autodesk.com/html/@D5D66E11BC96A1C8427F98151D3E9A7A/emoticons/1f642.png" alt=":slightly_smiling_face:" title=":slightly_smiling_face:" /&gt; &lt;img class="lia-deferred-image lia-image-emoji" src="https://forums.autodesk.com/html/@D5D66E11BC96A1C8427F98151D3E9A7A/emoticons/1f642.png" alt=":slightly_smiling_face:" title=":slightly_smiling_face:" /&gt;&lt;/STRONG&gt;&lt;/P&gt;</description>
      <pubDate>Wed, 27 Jul 2022 08:43:41 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/tool-offset-won-t-change-when-adjusting-on-control/m-p/11322808#M125423</guid>
      <dc:creator>engineguy</dc:creator>
      <dc:date>2022-07-27T08:43:41Z</dc:date>
    </item>
  </channel>
</rss>

