topic Re: Pipework information not showing when hovering over service in Fabrication CADmep Forum

Pipework information not showing when hovering over service

Anonymous — Thu, 15 Nov 2018 11:16:51 GMT

Hello

When I hover over pipework containment and circular duct work only shows an item number and no information. On rectangular duct work it shows item number, size, level etc. How do I get other services to show the same information?

Thanks

Re: Pipework information not showing when hovering over service

donald.kunath — Fri, 16 Nov 2018 15:48:27 GMT

Hello @Anonymous

Thank you for your post and welcome to the community!

Just to be sure we are on the same page, what Fabrication program are you using (CADmep?) and what version, you can find out what version you are running by typing appinfo into the command line. Please send me a screen shot of this information.

In addition to the app information can you also please send me screenshots of the what you are seeing with your duct work and not on your pipework containment or circular duct?

Thank you and I look forward to your thoughts!

Re: Pipework information not showing when hovering over service

Anonymous — Mon, 19 Nov 2018 08:36:07 GMT

Hi
Further to your email these are the items you have asked for along with a snapshot.
Using Fabrication CADmep 2019
Kind Regards
Mark Brackett

Re: Pipework information not showing when hovering over service

donald.kunath — Mon, 19 Nov 2018 16:05:51 GMT

Hi @Anonymous

Thank you for your reply, unfortunately I was not able to view the snapshots you sent my way. While you locate and send those screen shots my way I have some items I would like you to test.

Note: the fist step is essential for CADmep to display the default Item information correctly. When testing the ToolTip the CADmep attacher should be removed from the item.

1. Go to AutoCAD Options > Display tab > Windows Elements section - disable the option "Show rollover ToolTips"

If still not displaying:

2. Try toggling Dynamic Input (F12)

If still not displaying:

3. Issue the FORCETOOLTIP command

Please give the above a try and report back to me your findings.

If you found my post solved your problem, please click on "Accept Solution" to help others with similar questions.

Thank you and I look forward to your thoughts!

Re: Pipework information not showing when hovering over service

donald.kunath — Tue, 20 Nov 2018 16:03:54 GMT

Hi @Anonymous

I hope you are doing well and making lots of progress on your project.

I wanted to check in and see if you had a chance to review the suggestion from my last forum post, or if you have any additional questions for me?

If you found my previous post solved your problem, please click on "Accept Solution" to help others with similar questions.

Thank you and I look forward to your thoughts!

Re: Pipework information not showing when hovering over service

Anonymous — Mon, 15 Apr 2019 13:50:38 GMT

Hi Donald

Further to your email response below. Have had the problem again recently.

Just to let you know

Item2. Try toggling Dynamic Input (F12)

Worked.

Many Thanks

Mark

@donald.kunath wrote:

Hi @Anonymous

Thank you for your reply, unfortunately I was not able to view the snapshots you sent my way. While you locate and send those screen shots my way I have some items I would like you to test.

Note: the fist step is essential for CADmep to display the default Item information correctly. When testing the ToolTip the CADmep attacher should be removed from the item.

1. Go to AutoCAD Options > Display tab > Windows Elements section - disable the option "Show rollover ToolTips"

If still not displaying:

2. Try toggling Dynamic Input (F12)

If still not displaying:

3. Issue the FORCETOOLTIP command

Please give the above a try and report back to me your findings.

If you found my post solved your problem, please click on "Accept Solution" to help others with similar questions.

Thank you and I look forward to your thoughts!

Re: Pipework information not showing when hovering over service

Wayne_Harris — Thu, 25 Jul 2024 21:05:46 GMT

Using CADmep 2024, I am not able to see the spool number information in the rollover tool tips box. Is there a way to add custom properties that you want to see when rolling over/hovering on items?

1. Go to AutoCAD Options > Display tab > Windows Elements section - disable the option "Show rollover ToolTips"

If still not displaying:

Confirmed and no change

2. Try toggling Dynamic Input (F12)

If still not displaying:

No change

3. Issue the FORCETOOLTIP command

No change