https://forums.autodesk.com/t5/fabrication-cadmep-forum/estmep-summary-price-pipe-length/m-p/11569955#M5161 <P>When placing a half pipe length in a ESTmep project the cost breakdown shows material cost per ft and is shown correctly. However it lists the full length item price as Gross item extension and is reported in the Estimating summary which has the effect of pricing every pipe short as a full length. Where would i find the setting that allows the pipe piece to be reported based on its length and not the full item cost.</P> Tue, 22 Nov 2022 13:03:37 GMT jdoidgeWTF9W 2022-11-22T13:03:37Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/estmep-summary-price-pipe-length/m-p/11569955#M5161 <P>When placing a half pipe length in a ESTmep project the cost breakdown shows material cost per ft and is shown correctly. However it lists the full length item price as Gross item extension and is reported in the Estimating summary which has the effect of pricing every pipe short as a full length. Where would i find the setting that allows the pipe piece to be reported based on its length and not the full item cost.</P> Tue, 22 Nov 2022 13:03:37 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/estmep-summary-price-pipe-length/m-p/11569955#M5161 jdoidgeWTF9W 2022-11-22T13:03:37Z