topic Re: Spooling renumbers hangers - local setting? in Fabrication CADmep Forum

Spooling renumbers hangers - local setting?

efoxSMI — Mon, 25 Apr 2022 19:23:30 GMT

Hi,

We renumber our hangers on a whole floor before spooling and it has worked great for years. Now one of our stations has an issue where spooling an assembly renumbers the hangers for that assembly. Spooling the same assembly on another workstation works fine, preserving the original hanger numbers. The settings in the spool dialog are identical for the two machines. They do use separate local spool.ini files though. Could a setting in that file be the culprit? Thanks in advance for any help you can provide.

Eric

https://www.xtracad.com/forum/index.php/topic,17041.0.html

Re: Spooling renumbers hangers - local setting?

nathan.chapman — Tue, 26 Apr 2022 20:23:54 GMT

The settings you see in your spool dialogue will get written into the spool.ini. What happens if you give the ini that works to the workstation that doesn't. Do you get the same result?

Re: Spooling renumbers hangers - local setting?

efoxSMI — Sun, 01 May 2022 16:24:11 GMT

Yes I had replaced the spool.ini file with another one that was working properly and the problem went away. Still figuring out what the problem was in the first place. Thank you!