Welded round elbow with welding micro bridge

michal.kopacz — Tue, 23 Feb 2021 12:27:08 GMT

Hi all,

I'm trying to solve this, but no luck so far. What's the case?

We're producing round welded elbows from time to time. I need my plasma not to fully cut inside lines so i need to have micro bridges there. Now i'm doing this by hand in edit development. As example - elbow 100mm out of 4 parts.

Pic. 2 - setting up Marker Depth (3mm for instance)

Pic. 3 - V markers visible in the development

Now I enter the room, on a horse, whole in white.

I'm erasing V markers - so now I have a small bridge in the middle, afterwards i move those pink lines from the edges.

So now we've got a situation like on:

Pic. 4 - after cutting, we have one plate almost cut into four, we can fold it into a pipe, weld one seam and cut out those small bridges - we've got 4 parts ready to be rotated and welded together.

Does anybody know how to do this without a manual part? It takes to much time to it by hand every time.

Re: Welded round elbow with welding micro bridge

LanceTSM — Mon, 01 Mar 2021 01:24:50 GMT

The Tool you need to do this is "STITCH".

This can be done either on the part using "Edit Developments - Profiler - Profile Menu - Stitch"

or after nesting using "Manual Nest - Operation Menu - Stitching"

Hope this helps.

Re: Welded round elbow with welding micro bridge

michal.kopacz — Mon, 01 Mar 2021 06:46:07 GMT

Yes, yes, yes. This is it. Thank you a lot!

topic Welded round elbow with welding micro bridge in Fabrication CADmep Forum

Welded round elbow with welding micro bridge

Re: Welded round elbow with welding micro bridge

Re: Welded round elbow with welding micro bridge