CAMduct post processor

sfrasher — Tue, 06 Oct 2020 18:36:17 GMT

Is there a post processor that will work with Torchmate Accumove 2, it is a .gm extension.

Re: CAMduct post processor

dyoung — Wed, 28 Oct 2020 14:10:52 GMT

No. Although depending on the code, one of the others may work. D6 is always worth a try. Looking at the NC code required can help inform.

You can create a custom post yourself in the software (not easy if you're not familiar w/NC or G-Code) but sometimers even that doesn't give you enough felxibility in which case you can have a custom VPL created.

If you need a custom post, contact Applied Software (in the US)....

https://www.asti.com/

Or A2K (if Australia)

https://www.a2ktechnologies.com.au/

topic Re: CAMduct post processor in Fabrication CADmep Forum

CAMduct post processor

Re: CAMduct post processor