topic Revit parts in Fabrication CADmep Forum

Revit parts

mattpick10 — Wed, 12 Feb 2020 18:03:09 GMT

Is it possible to create new parts for the revit fabrication. I want to creat a new duc set that does not have to be the set length set within the fabrication part for example a 600mm x 600mm to 400mm x 400mm would have to be approx 500mm long however due to site conditions I want to be able to make this any length I require

thanks

Re: Revit parts

Anonymous — Thu, 13 Feb 2020 18:10:28 GMT

Yes, you can. But you can't do it from Revit. Need to do it from CADmep, ESTmep or CAMduct.

Re: Revit parts

mattpick10 — Thu, 13 Feb 2020 18:16:34 GMT

Can you recommend any tutorials that can help me

Re: Revit parts

MOatman — Thu, 13 Feb 2020 18:21:52 GMT

http://help.autodesk.com/view/FABRICATION/2020/ENU/?guid=GUID-8BF4B16F-339E-4730-82FC-29B8ACB9CF74