https://forums.autodesk.com/t5/fabrication-cadmep-forum/convert-cadworx-to-fabrication-cadmep/m-p/8751673#M4043 <P>Natively this cannot be done. If your super clever and a decent programmer, then you can collect enough information from the Cadworx objects to place generic parts over the cadworx objects, set their size with COD scripting and then REVDESIGN them. Total pain in the ass, but I've been quite successful at with this in the past.</P> Thu, 25 Apr 2019 01:02:04 GMT jhoward-HOB 2019-04-25T01:02:04Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/convert-cadworx-to-fabrication-cadmep/m-p/8704308#M3970 <P>Can anyone guide if we can convert CADWorx File/Specification to Fabrication CADmep ITM?</P> Wed, 03 Apr 2019 13:09:33 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/convert-cadworx-to-fabrication-cadmep/m-p/8704308#M3970 pinaki.rajak 2019-04-03T13:09:33Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/convert-cadworx-to-fabrication-cadmep/m-p/8726426#M4002 <P>Never heard of this being possible.</P> Fri, 12 Apr 2019 13:22:13 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/convert-cadworx-to-fabrication-cadmep/m-p/8726426#M4002 Anonymous 2019-04-12T13:22:13Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/convert-cadworx-to-fabrication-cadmep/m-p/8751673#M4043 <P>Natively this cannot be done. If your super clever and a decent programmer, then you can collect enough information from the Cadworx objects to place generic parts over the cadworx objects, set their size with COD scripting and then REVDESIGN them. Total pain in the ass, but I've been quite successful at with this in the past.</P> Thu, 25 Apr 2019 01:02:04 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/convert-cadworx-to-fabrication-cadmep/m-p/8751673#M4043 jhoward-HOB 2019-04-25T01:02:04Z