https://forums.autodesk.com/t5/fabrication-cadmep-forum/report-lines/m-p/7989572#M3215 <P>Thank you!&nbsp;</P> Wed, 09 May 2018 10:13:19 GMT Anonymous 2018-05-09T10:13:19Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/report-lines/m-p/7977681#M3203 <P>Is there a way to make lines between each item. We are having problems with guys following the hanger cut lists.&nbsp; we would like to add a line between each hanger like an excel spreadsheet.&nbsp;</P> Thu, 03 May 2018 15:45:46 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/report-lines/m-p/7977681#M3203 Anonymous 2018-05-03T15:45:46Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/report-lines/m-p/7977794#M3204 <P>It is in the Report Builder.&nbsp; Pick on a field you have added and then look under the Column tab on the right.&nbsp; You need to check "Separate Change in Consecutive Data" option.</P><P>Add to as many fields as you like to make it consistently show up.</P> Thu, 03 May 2018 16:16:13 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/report-lines/m-p/7977794#M3204 MOatman 2018-05-03T16:16:13Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/report-lines/m-p/7989572#M3215 <P>Thank you!&nbsp;</P> Wed, 09 May 2018 10:13:19 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/report-lines/m-p/7989572#M3215 Anonymous 2018-05-09T10:13:19Z