topic Nesting process for waterjet table in addition to plasma table. in Fabrication CADmep Forum

Nesting process for waterjet table in addition to plasma table.

Anonymous — Wed, 25 Oct 2017 14:02:58 GMT

Just added a waterjet table to my inventory of toys in my sheet metal shop, the only thing I see on the screen is the nests for the sheet metal. I am having a really hard time setting up the nest processes for the waterjet.

I assume I should be able to see the nests for the liner on my screen as well.

Any suggestions??

Thanks.

Louis Figueroa.

Re: Nesting process for waterjet table in addition to plasma table.

Anonymous — Fri, 27 Oct 2017 13:07:55 GMT

You'll need to configure an additional machine.

File -> Setup -> Installed Machines

Re: Nesting process for waterjet table in addition to plasma table.

LanceTSM — Tue, 31 Oct 2017 12:51:25 GMT

You also need to select the option in Database - Fittings - Pattern Switches - Developments - "Cut Insulation"

and tick the box in Auto Nest Dialog - Method Tab - "Nest Insulation Developments"

You should then see your Nested Sheets for the Liner.