https://forums.autodesk.com/t5/fabrication-cadmep-forum/auto-length-for-things-other-than-straigh-duct/m-p/7417177#M2784 <P>How can you set an auto length for a canvas connection? Thank You</P> Thu, 28 Sep 2017 14:46:49 GMT asherjoh 2017-09-28T14:46:49Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/auto-length-for-things-other-than-straigh-duct/m-p/7336441#M2720 <P>Is there a was to set up duct items (other than straight duct which already&nbsp;has a auto length&nbsp;of 60" because of sheet metal size) with a auto length? For instance I want&nbsp; to set up flex connectors (or canvas connection) for 8" length. It is 3x3x3 flex, minus a inch for flex allowance. 9-1=8. So when I make a connector, if it has S+D (-1/2") and has a 1" flange out (-1"), it will be 6 1/2" long. I want the flex connector&nbsp;length to adjust for connector type. Thanks</P> Tue, 29 Aug 2017 16:11:34 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/auto-length-for-things-other-than-straigh-duct/m-p/7336441#M2720 asherjoh 2017-08-29T16:11:34Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/auto-length-for-things-other-than-straigh-duct/m-p/7374694#M2750 <P>The length would be controlled partially&nbsp;@ the ITM level, and partially at the connector level.&nbsp;</P> Tue, 12 Sep 2017 20:49:55 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/auto-length-for-things-other-than-straigh-duct/m-p/7374694#M2750 Anonymous 2017-09-12T20:49:55Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/auto-length-for-things-other-than-straigh-duct/m-p/7417177#M2784 <P>How can you set an auto length for a canvas connection? Thank You</P> Thu, 28 Sep 2017 14:46:49 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/auto-length-for-things-other-than-straigh-duct/m-p/7417177#M2784 asherjoh 2017-09-28T14:46:49Z