https://forums.autodesk.com/t5/fabrication-cadmep-forum/camduct-marking-location/m-p/7288343#M2704 <P>You can drag it to where you want the tag.</P> Wed, 09 Aug 2017 18:12:30 GMT Anonymous 2017-08-09T18:12:30Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/camduct-marking-location/m-p/7130711#M2463 <P>Is there a way to control the position of the marking on the sheet?</P> <P>CAMduct does an OK job of making sure it is on the part being cut but I can't find a way to force the marking into a corner for example. I want to do this to make it easier to read on large parts.</P> Tue, 06 Jun 2017 04:04:05 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/camduct-marking-location/m-p/7130711#M2463 matthewweake 2017-06-06T04:04:05Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/camduct-marking-location/m-p/7288343#M2704 <P>You can drag it to where you want the tag.</P> Wed, 09 Aug 2017 18:12:30 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/camduct-marking-location/m-p/7288343#M2704 Anonymous 2017-08-09T18:12:30Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/camduct-marking-location/m-p/7288811#M2707 <P>Do you mean editing the nest and then moving the marking? I don't seem to be able to select the marking to move it manually.</P> Wed, 09 Aug 2017 20:41:13 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/camduct-marking-location/m-p/7288811#M2707 matthewweake 2017-08-09T20:41:13Z