https://forums.autodesk.com/t5/fabrication-cadmep-forum/seam-cut-back/m-p/7220107#M2583 <P>Set the Turnover to exactly how much material you need for the TDC connection, then&nbsp;add the 5/8" to the Straight column. &nbsp;</P> Tue, 11 Jul 2017 17:17:11 GMT Anonymous 2017-07-11T17:17:11Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/seam-cut-back/m-p/7209653#M2549 <P>I'm trying to set up a notch for TDC. the turn over is 2" but it needs 2 5/8" notch to go through the roll former. In the connector dialog the seam cut back doesn't change anything. I can change the turnover to 2 5/8 but the part will be 5/8 too long. same as with other connectors like 1" Tap you have to cut the lock seam back further to allow clearance to bend it or form it.&nbsp;</P> Thu, 06 Jul 2017 15:22:07 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/seam-cut-back/m-p/7209653#M2549 csmfabrobert495AH 2017-07-06T15:22:07Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/seam-cut-back/m-p/7220107#M2583 <P>Set the Turnover to exactly how much material you need for the TDC connection, then&nbsp;add the 5/8" to the Straight column. &nbsp;</P> Tue, 11 Jul 2017 17:17:11 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/seam-cut-back/m-p/7220107#M2583 Anonymous 2017-07-11T17:17:11Z