topic Re: DWG TrueView & Object Enabler in Fabrication CADmep Forum

DWG TrueView & Object Enabler

Bangorsteel — Thu, 11 Feb 2016 08:56:07 GMT

Dear Sir / Madam

One of our clients needs to look at HVCA Ductwork and I advised them to download DWG TRueView & Object Enabler (I have given all the correct links to the client for their convenience).

They got back to me stating that the drawing does not open showing ductwork, so I installed the same said software on an test machine in the office and they are correct, ductwork does not show.

I have attached a screen capture of the error message that appears.

Can anyone help?

AARON @ BSF

Re: DWG TrueView & Object Enabler

porterja — Fri, 12 Feb 2016 20:41:16 GMT

Hi Aaron,

Thank you for your question and for contributing to the Autodesk Community Forums!

I understand you are unable to see some HVAC ductwork utilizing and experiencing an error while opening a Fabrication dwg in Autodesk® DWG TrueView™. The probably cause for this is the Fabrication CADmep Object Enabler dbx file does not load properly in DWG TrueView™.

To resolve the issue perform the following steps in DWG TrueView:

Access the DWG TrueView options (NOTE: an open drawing is required to access the options)
- Right-click in the command bar at the bottom of the screen > Options
- OR
- Click the DWG TrueView button in the upper left corner > Options
In the "Files" tab, expand "Support File Search Path"
Click "Add..."
Click "Browse..." and navigate to the DBX folder of the Object Enabler installation:

C:\Program Files\Autodesk\Fabrication <version>\CADmep\DBX

- Where <version> refers to the installed Object Enabler version

Click "OK" to add the path
Click "OK" in the Options dialog
Close and restart DWG TrueView

If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!

Re: DWG TrueView & Object Enabler

porterja — Tue, 16 Feb 2016 20:48:08 GMT

Hi Aaron,
I hope all is well. Just wanted to follow up with you to see if the information I provided resolved the DWG TrueView issue. Please feel free to let me know if you need further assistance and I'll be glad to help.
I hope I have helped answer your questions and look forward to hearing from you soon.
Jarrett porter
Autodesk Technical Support Specialist

Re: DWG TrueView & Object Enabler

Bangorsteel — Wed, 17 Feb 2016 10:53:21 GMT

Sorry for the late reply - that worked perfectly, thank you very much for your help!

Re: DWG TrueView & Object Enabler

Anonymous — Wed, 25 Jan 2017 16:03:56 GMT

Hi Jarrett,

I have the exact same issue as noted by Aaron but when I load the object enabler I still come up with the error. I have loaded to the DBX folder which

contains the cadmep21_x64 file but I still come up with an error on restart. Would be grateful for any additional tips. I have also attached a couple of screenshots of the error and loading of the object.

Thanks,

-Rich

Re: DWG TrueView & Object Enabler

Bangorsteel — Wed, 25 Jan 2017 16:06:40 GMT

I actually gave up on this, as no matter what I tried, nothing worked unfortunately

Re: DWG TrueView & Object Enabler

Anonymous — Mon, 30 Jan 2017 13:56:26 GMT

I did get it to work with TrueView 2015 and CADmep 2015 but no luck with the 2017 versions.

Re: DWG TrueView & Object Enabler

Bangorsteel — Mon, 30 Jan 2017 14:05:11 GMT

Totally agree. Quite frustrating!