https://forums.autodesk.com/t5/fabrication-cadmep-forum/service-template-help/m-p/6760555#M2188 <P>Fabrication handles this using Cut Type, when a straight is full length the Cut Type will&nbsp;be Decoiled Straight, when a straight is NOT full length the Cut Type will be Machine Cut. I don't think there is a way to do what you are trying to do.</P> Tue, 20 Dec 2016 14:28:34 GMT davidronson 2016-12-20T14:28:34Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/service-template-help/m-p/6754264#M2184 <P>Can someone please assist with the following:</P><P>We are trying to set up our database so that when we do design to fabrication in Revit, standard length ducts and cut ducts are not the same fabrication part. &nbsp;We have tried adding multiple buttons to our service template and locking their set lengths, this however has not worked. &nbsp;All of our ductwork is being converted to the standard coil duct in the fabrication in Revit. &nbsp;Is there button mapping required to accomplish this? &nbsp;Please help.&nbsp;</P> Fri, 16 Dec 2016 14:46:05 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/service-template-help/m-p/6754264#M2184 Anonymous 2016-12-16T14:46:05Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/service-template-help/m-p/6760555#M2188 <P>Fabrication handles this using Cut Type, when a straight is full length the Cut Type will&nbsp;be Decoiled Straight, when a straight is NOT full length the Cut Type will be Machine Cut. I don't think there is a way to do what you are trying to do.</P> Tue, 20 Dec 2016 14:28:34 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/service-template-help/m-p/6760555#M2188 davidronson 2016-12-20T14:28:34Z