https://forums.autodesk.com/t5/fabrication-cadmep-forum/fabrication-2016/m-p/6670621#M2065 <P>There have been various workflows for many years on how to export a Revit model into a Fabrication DesignLine. You can check out this link to see a reference specific to 2016.</P><P><A href="https://www.cadlinecommunity.co.uk/hc/en-us/articles/203874121-Revit-2016-Fabrication-CADmep-Workflow" target="_self">https://www.cadlinecommunity.co.uk/hc/en-us/articles/203874121-Revit-2016-Fabrication-CADmep-Workflow</A></P><P>&nbsp;</P><P>However, if you are talking about the 1-1 swap that can be done using the MAJ file type, then you would use the OpenJob/CreateCAM commands. This is dependent on both the Revit model and Fabrication utilizing a CID driven databases for the objects though. If you want to take something built from families and bring those into Fabrication, then the first example is your best bet; as far as I am aware anyway.....</P><P>&nbsp;</P><P>Here is an example of the MAJ ones done with hangers:</P><P><A href="http://www.asti.com/News-Events/blogs/PostId/1664/hangers-on-a-sloped-roof" target="_self">http://www.asti.com/News-Events/blogs/PostId/1664/hangers-on-a-sloped-roof</A></P> Sun, 06 Nov 2016 22:11:14 GMT Anonymous 2016-11-06T22:11:14Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/fabrication-2016/m-p/6660772#M2059 <P>Converting revit MEP parts to fabrication parts is this possible in 2016 or only 2017 revit?&nbsp;</P><P>Also simplest way for sloping fabrication parts ?&nbsp;</P><P>&nbsp;</P><P>&nbsp;</P><P>&nbsp;</P> Tue, 01 Nov 2016 19:52:53 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/fabrication-2016/m-p/6660772#M2059 Anonymous 2016-11-01T19:52:53Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/fabrication-2016/m-p/6670621#M2065 <P>There have been various workflows for many years on how to export a Revit model into a Fabrication DesignLine. You can check out this link to see a reference specific to 2016.</P><P><A href="https://www.cadlinecommunity.co.uk/hc/en-us/articles/203874121-Revit-2016-Fabrication-CADmep-Workflow" target="_self">https://www.cadlinecommunity.co.uk/hc/en-us/articles/203874121-Revit-2016-Fabrication-CADmep-Workflow</A></P><P>&nbsp;</P><P>However, if you are talking about the 1-1 swap that can be done using the MAJ file type, then you would use the OpenJob/CreateCAM commands. This is dependent on both the Revit model and Fabrication utilizing a CID driven databases for the objects though. If you want to take something built from families and bring those into Fabrication, then the first example is your best bet; as far as I am aware anyway.....</P><P>&nbsp;</P><P>Here is an example of the MAJ ones done with hangers:</P><P><A href="http://www.asti.com/News-Events/blogs/PostId/1664/hangers-on-a-sloped-roof" target="_self">http://www.asti.com/News-Events/blogs/PostId/1664/hangers-on-a-sloped-roof</A></P> Sun, 06 Nov 2016 22:11:14 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/fabrication-2016/m-p/6670621#M2065 Anonymous 2016-11-06T22:11:14Z