https://forums.autodesk.com/t5/fabrication-cadmep-forum/thread-o-lets-causing-hangers-to-not-fill-using-design-line/m-p/6629168#M2012 <P>I am having an issue with my hangers not filling on the mains when using design line with thread-o-let branch lines. I am using Fabrication 2016 SP5 and my service spec is set to "After Change in Direction" and "Not at Straight Joints". My hangers fill in correctly when there are no thread-o-let branches off the main pipe. See attached image for example. Any help appreciated.</P> Tue, 18 Oct 2016 14:16:41 GMT willweaver 2016-10-18T14:16:41Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/thread-o-lets-causing-hangers-to-not-fill-using-design-line/m-p/6629168#M2012 <P>I am having an issue with my hangers not filling on the mains when using design line with thread-o-let branch lines. I am using Fabrication 2016 SP5 and my service spec is set to "After Change in Direction" and "Not at Straight Joints". My hangers fill in correctly when there are no thread-o-let branches off the main pipe. See attached image for example. Any help appreciated.</P> Tue, 18 Oct 2016 14:16:41 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/thread-o-lets-causing-hangers-to-not-fill-using-design-line/m-p/6629168#M2012 willweaver 2016-10-18T14:16:41Z