https://forums.autodesk.com/t5/fabrication-cadmep-forum/cid-761/m-p/5840137#M1765 <P>Hi tdelara</P> <P>&nbsp;</P> <P>You have a Straight Adjust on the connector you are using, that is causing it to fail.&nbsp; The Straight Adjust was only designed to be used when jobs came in from CADduct or CADmep without an extension on a Throat, over the years people just started using it to make connectors when it is not needed.</P> <P>&nbsp;</P> <P>If you have .5 turnover and .5straight it is just going to add 1" on the end, so just make it a 1" Turnover and get rid of the Straight Adjust.</P> Thu, 01 Oct 2015 10:12:01 GMT davedykes 2015-10-01T10:12:01Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/cid-761/m-p/5828404#M1764 <P>This fitting is not allowing me to input anything in the Top Outer Connection other than an equal number of the throat.&nbsp;<img id="smileyfrustrated" class="emoticon emoticon-smileyfrustrated" src="https://forums.autodesk.com/i/smilies/16x16_smiley-frustrated.png" alt="Smiley Frustrated" title="Smiley Frustrated" /></P> Tue, 22 Sep 2015 19:44:28 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/cid-761/m-p/5828404#M1764 tdelara01 2015-09-22T19:44:28Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/cid-761/m-p/5840137#M1765 <P>Hi tdelara</P> <P>&nbsp;</P> <P>You have a Straight Adjust on the connector you are using, that is causing it to fail.&nbsp; The Straight Adjust was only designed to be used when jobs came in from CADduct or CADmep without an extension on a Throat, over the years people just started using it to make connectors when it is not needed.</P> <P>&nbsp;</P> <P>If you have .5 turnover and .5straight it is just going to add 1" on the end, so just make it a 1" Turnover and get rid of the Straight Adjust.</P> Thu, 01 Oct 2015 10:12:01 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/cid-761/m-p/5840137#M1765 davedykes 2015-10-01T10:12:01Z