https://forums.autodesk.com/t5/fabrication-cadmep-forum/channel-s-for-insulated-pieces/m-p/5741149#M1725 <P>For those familiar with HVAC systems channels are used on insulated pieces to cover the exposed ends of the insulation. Every End has 4 channels 2 for the one dimension and 2 for the other as per a rectangular duct. Is there a way in which CAMduct can output all the channel lengths for an insulated job quantifying all the same dimensioned channels and displaying what thickness the insulation is for that specific channel ?</P><P>&nbsp;</P><P>The length of Channel would simply be the width and depth of the rectangular duct work.</P><P>&nbsp;</P> Sun, 26 Jul 2015 23:21:20 GMT Anonymous 2015-07-26T23:21:20Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/channel-s-for-insulated-pieces/m-p/5741149#M1725 <P>For those familiar with HVAC systems channels are used on insulated pieces to cover the exposed ends of the insulation. Every End has 4 channels 2 for the one dimension and 2 for the other as per a rectangular duct. Is there a way in which CAMduct can output all the channel lengths for an insulated job quantifying all the same dimensioned channels and displaying what thickness the insulation is for that specific channel ?</P><P>&nbsp;</P><P>The length of Channel would simply be the width and depth of the rectangular duct work.</P><P>&nbsp;</P> Sun, 26 Jul 2015 23:21:20 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/channel-s-for-insulated-pieces/m-p/5741149#M1725 Anonymous 2015-07-26T23:21:20Z