https://forums.autodesk.com/t5/fabrication-cadmep-forum/drawing-in-design-line/m-p/6069240#M1493 <P>when developing a design line drawing if the drawing has both mittered and radius elbows. is there a way to have both on the same line.</P><P>&nbsp;</P><P>Example a mittered elbow at the botom of a drop and than the first elbow radius 90 and after that back to mittered elbows.</P> Thu, 03 Mar 2016 21:19:11 GMT Anonymous 2016-03-03T21:19:11Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/drawing-in-design-line/m-p/6069240#M1493 <P>when developing a design line drawing if the drawing has both mittered and radius elbows. is there a way to have both on the same line.</P><P>&nbsp;</P><P>Example a mittered elbow at the botom of a drop and than the first elbow radius 90 and after that back to mittered elbows.</P> Thu, 03 Mar 2016 21:19:11 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/drawing-in-design-line/m-p/6069240#M1493 Anonymous 2016-03-03T21:19:11Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/drawing-in-design-line/m-p/6312083#M1494 <P>You would need to manually override the fitting that you want different by selecting ITM from serivice and placing it on the design line where needed.</P> Fri, 06 May 2016 13:39:38 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/drawing-in-design-line/m-p/6312083#M1494 bknapton 2016-05-06T13:39:38Z