topic Re: Looking for an Elbolet in Fabrication CADmep Forum

Looking for an Elbolet

LFM.VDC — Wed, 24 Feb 2016 20:12:54 GMT

Re: Looking for an Elbolet

AndySt.Clair2109 — Thu, 25 Feb 2016 13:25:03 GMT

If you build your own content you can make one from a TOL. In the dims list change the dimension D "Angle #1" to 45.

Re: Looking for an Elbolet

LFM.VDC — Thu, 25 Feb 2016 13:55:00 GMT

Andy,

Thanks for the help, that works great however, where do I adjust the insertion point? The elbolet will come in the middle of the pipe which I can then adjsut manualy but, I was looking for a way for it to come in exactly where it has to go. On tangent off the top or bottom of the pie.

Re: Looking for an Elbolet

AndySt.Clair2109 — Thu, 25 Feb 2016 14:31:57 GMT

I haven't quite figured that part out yet, I extend the centerline of the pipe and attach that way, but I know that's not perfect. See image...

Andy

Re: Looking for an Elbolet

LFM.VDC — Thu, 25 Feb 2016 14:36:11 GMT

Andy,

Thanks for taking the time and helping me out , I appreciate it.