tema creating circles with slight different diameters en AutoCAD for Mac Forum https://forums.autodesk.com/t5/autocad-for-mac-forum/creating-circles-with-slight-different-diameters/m-p/9651310#M38902 <P>I have been experiencing a problem when trying to create circles of very close diameters in that the second near circle just disappears when I press enter having carefully selected the required size. the attached image shows two outer circles created by selecting a slightly wider distance that I would have liked but this was the closest I could get it. The inner 2 circle are as required but the larger is just about to disappear as I press enter. Are there default constraints on how close these circles can be to one another. I have tried turing off OSNAP btw.&nbsp;</P> Thu, 23 Jul 2020 12:40:30 GMT office6PUWT 2020-07-23T12:40:30Z creating circles with slight different diameters https://forums.autodesk.com/t5/autocad-for-mac-forum/creating-circles-with-slight-different-diameters/m-p/9651310#M38902 <P>I have been experiencing a problem when trying to create circles of very close diameters in that the second near circle just disappears when I press enter having carefully selected the required size. the attached image shows two outer circles created by selecting a slightly wider distance that I would have liked but this was the closest I could get it. The inner 2 circle are as required but the larger is just about to disappear as I press enter. Are there default constraints on how close these circles can be to one another. I have tried turing off OSNAP btw.&nbsp;</P> Thu, 23 Jul 2020 12:40:30 GMT https://forums.autodesk.com/t5/autocad-for-mac-forum/creating-circles-with-slight-different-diameters/m-p/9651310#M38902 office6PUWT 2020-07-23T12:40:30Z Re: creating circles with slight different diameters https://forums.autodesk.com/t5/autocad-for-mac-forum/creating-circles-with-slight-different-diameters/m-p/9654720#M38914 <P>Hi,</P> <P>if you do the same but in a blank area and not over any thing , any changes ?</P> <P>&nbsp;</P> Sat, 25 Jul 2020 07:17:14 GMT https://forums.autodesk.com/t5/autocad-for-mac-forum/creating-circles-with-slight-different-diameters/m-p/9654720#M38914 imadHabash 2020-07-25T07:17:14Z