<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic Facing entry and exit points in Fusion Manufacture</title>
    <link>https://forums.autodesk.com/t5/fusion-manufacture/facing-entry-and-exit-points/m-p/8444427#M54842</link>
    <description>&lt;P&gt;I wanted to get other ideas than the way I solve this problem&lt;/P&gt;
&lt;P&gt;Scenario?&lt;/P&gt;
&lt;P&gt;material is 10" on the X and 5" on the Y.&lt;/P&gt;
&lt;P&gt;Cutter Diam is 6"&lt;/P&gt;
&lt;P&gt;Cutting speed is 10 ipm&lt;/P&gt;
&lt;P&gt;Ramp and pluge speed it 40 ipm&lt;/P&gt;
&lt;P&gt;The problem:&lt;/P&gt;
&lt;P&gt;There is no fields for telling 360 to begin cutting speed before touching the material.&lt;/P&gt;
&lt;P&gt;As is stands it enters the material at ramp speed then slows down to cutting speed.&lt;/P&gt;
&lt;P&gt;The point that it begins the cutting speed is based on the tool centerline.&lt;/P&gt;
&lt;P&gt;As a result I get a nasty cut the first inch or so then the nice cut the rest of the way.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;The only way I have found to crutch this is to lie and enter the cutter as 8 inches.&lt;/P&gt;
&lt;P&gt;This way it makes the down turn and slows down to cutting rate just before it touches the material.&lt;/P&gt;
&lt;P&gt;I also can slow the ramp rate down but that really sucks up the time.&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Any other way?&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;My pics are not dead accurate. I just put them up to give you the idea.&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="face1.jpg" style="width: 672px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/577188i1FDE226F07C4A812/image-size/large?v=v2&amp;amp;px=999" role="button" title="face1.jpg" alt="face1.jpg" /&gt;&lt;/span&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="face2.jpg" style="width: 768px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/577189iE3D5F08600B4772A/image-size/large?v=v2&amp;amp;px=999" role="button" title="face2.jpg" alt="face2.jpg" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
    <pubDate>Tue, 04 Dec 2018 16:06:11 GMT</pubDate>
    <dc:creator>Fueler</dc:creator>
    <dc:date>2018-12-04T16:06:11Z</dc:date>
    <item>
      <title>Facing entry and exit points</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/facing-entry-and-exit-points/m-p/8444427#M54842</link>
      <description>&lt;P&gt;I wanted to get other ideas than the way I solve this problem&lt;/P&gt;
&lt;P&gt;Scenario?&lt;/P&gt;
&lt;P&gt;material is 10" on the X and 5" on the Y.&lt;/P&gt;
&lt;P&gt;Cutter Diam is 6"&lt;/P&gt;
&lt;P&gt;Cutting speed is 10 ipm&lt;/P&gt;
&lt;P&gt;Ramp and pluge speed it 40 ipm&lt;/P&gt;
&lt;P&gt;The problem:&lt;/P&gt;
&lt;P&gt;There is no fields for telling 360 to begin cutting speed before touching the material.&lt;/P&gt;
&lt;P&gt;As is stands it enters the material at ramp speed then slows down to cutting speed.&lt;/P&gt;
&lt;P&gt;The point that it begins the cutting speed is based on the tool centerline.&lt;/P&gt;
&lt;P&gt;As a result I get a nasty cut the first inch or so then the nice cut the rest of the way.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;The only way I have found to crutch this is to lie and enter the cutter as 8 inches.&lt;/P&gt;
&lt;P&gt;This way it makes the down turn and slows down to cutting rate just before it touches the material.&lt;/P&gt;
&lt;P&gt;I also can slow the ramp rate down but that really sucks up the time.&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Any other way?&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;My pics are not dead accurate. I just put them up to give you the idea.&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="face1.jpg" style="width: 672px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/577188i1FDE226F07C4A812/image-size/large?v=v2&amp;amp;px=999" role="button" title="face1.jpg" alt="face1.jpg" /&gt;&lt;/span&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="face2.jpg" style="width: 768px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/577189iE3D5F08600B4772A/image-size/large?v=v2&amp;amp;px=999" role="button" title="face2.jpg" alt="face2.jpg" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Tue, 04 Dec 2018 16:06:11 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/facing-entry-and-exit-points/m-p/8444427#M54842</guid>
      <dc:creator>Fueler</dc:creator>
      <dc:date>2018-12-04T16:06:11Z</dc:date>
    </item>
    <item>
      <title>Re: Facing entry and exit points</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/facing-entry-and-exit-points/m-p/8444465#M54845</link>
      <description>&lt;P&gt;Turn off your lead-in and out.&lt;/P&gt;
&lt;P&gt;On the Passes tab, set your "Pass Extension" to 60% of the radius.&lt;/P&gt;
&lt;P&gt;This will rapid to depth, slightly off the part. It will then proceed to cut at your cutting feedrate.&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="2018-12-04_11h16_26.png" style="width: 864px;"&gt;&lt;img src="https://forums.autodesk.com/t5/image/serverpage/image-id/577196iEA7988E473415CAF/image-size/large?v=v2&amp;amp;px=999" role="button" title="2018-12-04_11h16_26.png" alt="2018-12-04_11h16_26.png" /&gt;&lt;/span&gt;&lt;/P&gt;</description>
      <pubDate>Tue, 04 Dec 2018 16:16:49 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/facing-entry-and-exit-points/m-p/8444465#M54845</guid>
      <dc:creator>LibertyMachine</dc:creator>
      <dc:date>2018-12-04T16:16:49Z</dc:date>
    </item>
    <item>
      <title>Re: Facing entry and exit points</title>
      <link>https://forums.autodesk.com/t5/fusion-manufacture/facing-entry-and-exit-points/m-p/8444700#M54852</link>
      <description>&lt;P&gt;&lt;EM&gt;That will work. Thanks&lt;/EM&gt;&lt;/P&gt;
&lt;P&gt;&lt;EM&gt;Funny thing., I messed around with that earlier and was not getting the result needed. Who knows?&lt;/EM&gt;&lt;/P&gt;
&lt;P&gt;&lt;EM&gt;I do think it would be&amp;nbsp;a good thing if we had control of that extension feature for both ends rather than being the same on both ends.&amp;nbsp;&lt;/EM&gt;&lt;/P&gt;</description>
      <pubDate>Tue, 04 Dec 2018 17:32:10 GMT</pubDate>
      <guid>https://forums.autodesk.com/t5/fusion-manufacture/facing-entry-and-exit-points/m-p/8444700#M54852</guid>
      <dc:creator>Fueler</dc:creator>
      <dc:date>2018-12-04T17:32:10Z</dc:date>
    </item>
  </channel>
</rss>

