https://forums.autodesk.com/t5/fabrication-cadmep-forum/pipework-branch-bend-shoe-display-problems-cid-2881/m-p/5975658#M948 <DIV>In Fabrication CADmep 2015 swept branch bends display with what appears to be a section of main attached to the branch. This confuses the plotted output as it appears there is a butt weld on the main adjacent the branch. Never had this on 2013.<BR /><BR />Any ideas on how to cure this problem?<BR /><BR />Thanks<BR />Rob</DIV> Wed, 06 Jan 2016 14:57:22 GMT Anonymous 2016-01-06T14:57:22Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/pipework-branch-bend-shoe-display-problems-cid-2881/m-p/5975658#M948 <DIV>In Fabrication CADmep 2015 swept branch bends display with what appears to be a section of main attached to the branch. This confuses the plotted output as it appears there is a butt weld on the main adjacent the branch. Never had this on 2013.<BR /><BR />Any ideas on how to cure this problem?<BR /><BR />Thanks<BR />Rob</DIV> Wed, 06 Jan 2016 14:57:22 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/pipework-branch-bend-shoe-display-problems-cid-2881/m-p/5975658#M948 Anonymous 2016-01-06T14:57:22Z