https://forums.autodesk.com/t5/fabrication-cadmep-forum/setting-a-double-head-router-machine-for-ductboard-with-camduct/m-p/8816959#M4107 <P>We got a chinese machine to cut phenolic duct, the machine has two heads (routers), we want to use one head for grooving and the other for cutting, I am able to make the g code in Camduct and when I use mach3 to operate the machine it works the both heads at the same time.&nbsp;</P><P>I set the post number: 1 for the cutting router and post number 2 for the grooving router.</P><P>Where is my mistake?</P><P>Thanks for your help.</P> Mon, 27 May 2019 18:45:49 GMT miltm 2019-05-27T18:45:49Z https://forums.autodesk.com/t5/fabrication-cadmep-forum/setting-a-double-head-router-machine-for-ductboard-with-camduct/m-p/8816959#M4107 <P>We got a chinese machine to cut phenolic duct, the machine has two heads (routers), we want to use one head for grooving and the other for cutting, I am able to make the g code in Camduct and when I use mach3 to operate the machine it works the both heads at the same time.&nbsp;</P><P>I set the post number: 1 for the cutting router and post number 2 for the grooving router.</P><P>Where is my mistake?</P><P>Thanks for your help.</P> Mon, 27 May 2019 18:45:49 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/setting-a-double-head-router-machine-for-ductboard-with-camduct/m-p/8816959#M4107 miltm 2019-05-27T18:45:49Z