MAP Proxy Can't export to IFC without an error message

tech3design — Sun, 06 Aug 2017 16:45:36 GMT

These MAP Poxy's are evil, that can not be exported to IFC no matter the enabler. see attached file.

I have had the AUTOCAD Fabrication enabler installed. I have even downloaded the AutoCAD fabrication 2018 and still can't create an IFC file. This is very important and I need help with this as soon as possible.

I am using Revit 2016 and AutoCAD MEP 2016 with the fabrication 2016 object enabler installed. I am trying to create a Revit file so I can use Revit Collaboration tap in Revit to upload to BIM 360 Team. I can't use AutoCAD MEP because BIM 360 team doesn't allow AutoCAD file uploaded and linkage in BIM 360 team.

Here is my process-

I open the MEP AutoCAD fabrication file from the Mechanical contractor in AutoCAD MEP with fabrication Enabler. I use proxygraphics command to "1"

then I use the IFC export command and it give me the error.

I need to IFC to create a Revit file to upload and link to BIM360 Team but can't create the IFC. Why?

Is there no one that has this problem? Has anyone run across this problem. Am I just out of luck. There should be a step by step instruction for this. If I get this resolve I will post a step by step to help other with this issue if I find one.

I really need help with this>>>

I can not create an IFC file from these two files.

Where are the experts that can tell me why,

topic MAP Proxy Can't export to IFC without an error message in Fabrication CADmep Forum

MAP Proxy Can't export to IFC without an error message