topic Latest Updates | New Knowledge Network Articles | Fabrication CADMEP in Fabrication CADmep Forum

topic Latest Updates | New Knowledge Network Articles | Fabrication CADMEP in Fabrication CADmep Forum https://forums.autodesk.com/t5/fabrication-cadmep-forum/latest-updates-new-knowledge-network-articles-fabrication-cadmep/m-p/7003613#M2357 <P><STRONG>Question: Where can I find a list of the latest Autodesk Knowledge Network support solutions that were created and/or updated for Fabrication CADmep?</STRONG></P> <P> </P> <P> </P> <CENTER><STRONG> Subscribe to receive updates for new Fabrication CADmep Knowledge Network articles.</STRONG> <BR />For more updated solutions, also check out the <STRONG><A href="http://autode.sk/1Niy43e" target="_blank" rel="nofollow noopener noreferrer">AutodeskHelp Blog</A></STRONG>!</CENTER><CENTER><A href="https://forums.autodesk.com/t5/fabrication-cadmep-forum/latest-updates-new-knowledge-network-articles-fabrication-cadmep/td-p/6042570" target="_blank">2016 Solutions</A></CENTER> Fri, 07 Apr 2017 18:54:09 GMT matthew.d 2017-04-07T18:54:09Z Latest Updates | New Knowledge Network Articles | Fabrication CADMEP https://forums.autodesk.com/t5/fabrication-cadmep-forum/latest-updates-new-knowledge-network-articles-fabrication-cadmep/m-p/7003613#M2357 <P><STRONG>Question: Where can I find a list of the latest Autodesk Knowledge Network support solutions that were created and/or updated for Fabrication CADmep?</STRONG></P> <P> </P> <P> </P> <CENTER><STRONG> Subscribe to receive updates for new Fabrication CADmep Knowledge Network articles.</STRONG> <BR />For more updated solutions, also check out the <STRONG><A href="http://autode.sk/1Niy43e" target="_blank" rel="nofollow noopener noreferrer">AutodeskHelp Blog</A></STRONG>!</CENTER><CENTER><A href="https://forums.autodesk.com/t5/fabrication-cadmep-forum/latest-updates-new-knowledge-network-articles-fabrication-cadmep/td-p/6042570" target="_blank">2016 Solutions</A></CENTER> Fri, 07 Apr 2017 18:54:09 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/latest-updates-new-knowledge-network-articles-fabrication-cadmep/m-p/7003613#M2357 matthew.d 2017-04-07T18:54:09Z Re: Latest Updates | New Knowledge Network Articles | Fabrication CADMEP https://forums.autodesk.com/t5/fabrication-cadmep-forum/latest-updates-new-knowledge-network-articles-fabrication-cadmep/m-p/7003621#M2358 <P><FONT size="3"><STRONG>October 2018</STRONG></FONT></P> <TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"><COLGROUP><COL width="665" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"How to display specific annotations on item Labels in CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-display-specific-annotations-on-item-Labels-in-CAMduct" target="_blank">How to display specific annotations on item Labels in CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Material overwritten when increasing Database Ownership version in Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Material-overwritten-when-increasing-Database-Ownership-version-in-Fabrication" target="_blank">Material overwritten when increasing Database Ownership version in Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to automatic nest parts along the sheet length in CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-automatic-nest-parts-along-the-sheet-length-in-CAMduct" target="_blank">How to automatic nest parts along the sheet length in CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to set a different Throat Seam for Tee and Bend items in CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-a-different-Throat-Seam-for-Tee-and-Bend-items-in-CAMduct" target="_blank">How to set a different Throat Seam for Tee and Bend items in CAMduct</A></TD> </TR> </TBODY> </TABLE> <P><FONT size="3"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/PDF-Underlay-is-not-visible-after-import-in-ESTmep" target="_blank">PDF Underlay is not visible after import in ESTmep</A></FONT></P> <P><FONT size="3"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Dampers-do-not-fill-in-with-Design-Line-in-Fabrication" target="_blank">Dampers or Access Doors do not fill in with Design Line in Fabrication</A></FONT></P> <P><FONT size="3"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Ancillary-cost-properties-missed-in-Fabrication-item-reports" target="_blank">Ancillary cost properties missed in Fabrication item reports</A></FONT></P> <TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"><COLGROUP><COL width="803" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"How to set a specific orientation for the label Graphical CNC Part View in CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-a-specific-orientation-for-the-label-Graphical-CNC-Part-View-in-CAMduct" target="_blank">How to set a specific orientation for the label Graphical CNC Part View in CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Items material not applied after importing a job in CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Items-material-changes-after-importing-a-job-in-CAMduct" target="_blank">Items material not applied after importing a job in CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Missed decoiled Straight labels in CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Missed-decoiled-Straight-labels-in-CAMduct" target="_blank">Missed decoiled Straight labels in CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"The flange of the Tray with Holes CID 862 pattern can not be set to 0 in Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/The-flange-of-the-Tray-with-Holes-CID-862-pattern-can-not-be-set-to-0-in-Fabrication" target="_blank">The flange of the Tray with Holes CID 862 pattern can not be set to 0 in Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"In-use Service Templates are lost when purging database in CADmep, ESTmep, or CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/In-use-Service-Templates-are-lost-when-purging-database-in-CADmep-ESTmep-CAMduct" target="_blank">In-use Service Templates are lost when purging database in CADmep, ESTmep, or CAMduct</A></TD> </TR> </TBODY> </TABLE> <TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"><COLGROUP><COL width="759" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Where to find the Fabrication Fundamental Training exercise files"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Where-to-find-the-Fabrication-Fundamental-Training-exercise-files" target="_blank">Where to find the Fabrication Fundamental Training exercise files</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to optimize the Taper duct parts development in CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-optimize-the-Taper-duct-parts-development-in-CAMduct" target="_blank">How to optimize the Taper duct parts development in CAMduct</A></TD> </TR> </TBODY> </TABLE> <TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"><COLGROUP><COL width="754" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Fabrication CADmep 2018.2 update fails to install"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fabrication-CADmep-2018-2-update-fails-to-install" target="_blank">Fabrication CADmep 2018.2 update fails to install</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to configure the width of the Spool Report table in CADmep"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-configure-the-width-of-the-Spool-Report-table-in-CADmep" target="_blank">How to configure the width of the Spool Report table in CADmep</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to change the text size of a Spool table in CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-the-text-size-of-a-Spool-table-in-CAMduct" target="_blank">How to change the text size of a Spool table in CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to slice oversize Bend Cheeks in the same position in CAMduct"}"> <P><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-slice-oversize-Bend-Cheeks-in-the-same-position-in-CAMduct" target="_blank">How to slice oversize Bend Cheeks in the same position in CAMduct</A></P> </TD> </TR> </TBODY> </TABLE> <P> </P> <P><FONT size="3"><STRONG>September 2018</STRONG></FONT></P> <TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"><COLGROUP><COL width="644" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Specification does not apply expected material in Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Specification-does-not-apply-expected-material-in-Fabrication" target="_blank">Specification does not apply expected material in Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Adding item folders with sub-folders fails in Fabrication 2019"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Adding-item-folders-with-sub-folders-fails-in-Fabrication-2019" target="_blank">Adding item folders with sub-folders fails in Fabrication 2019</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Maximum Sheet Size option for Straight CID 1 is reset in Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Maximum-Sheet-Size-option-for-Straight-CID-1-is-reset-in-Fabrication" target="_blank">Maximum Sheet Size option for Straight CID 1 is reset in Fabrication</A></TD> </TR> </TBODY> </TABLE> <P><FONT size="3"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-export-reports-as-PDF-in-Fabrication" target="_blank">How to export reports as PDF in Fabrication</A></FONT></P> <TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"><COLGROUP><COL width="580" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Fabrication CAMduct does not always slice off the unused remaining sheet after nesting"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fabrication-CAMduct-does-not-always-slice-off-the-unused-remaining-sheet-after-nesting" target="_blank">Fabrication CAMduct does not always slice off the unused remaining sheet after nesting</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Where to find scripting documentation for Fabrication products"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Where-to-find-scripting-documentation-for-Fabrication-products" target="_blank">Where to find scripting documentation for Fabrication products</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Prices truncated when importing Costs in Fabrication ESTmep"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Prices-truncated-when-importing-Costs-in-Fabrication-ESTmep" target="_blank">Prices truncated when importing Costs in Fabrication ESTmep</A></TD> </TR> </TBODY> </TABLE> <P><FONT size="3"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Electrical-Conduit-item-not-available-in-Fabrication" target="_blank">Electrical Conduit item not available in Fabrication</A></FONT></P> <TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"><COLGROUP><COL width="736" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Splitter Tabs not applied in Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Splitter-Tabs-not-applied-in-Fabrication-CAMduct" target="_blank">Splitter Tabs not applied in Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to automatically quantify Insulation fixing materials in Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-automatically-quantify-Insulation-fixing-materials-in-Fabrication" target="_blank">How to automatically quantify Insulation fixing materials in Fabrication</A></TD> </TR> </TBODY> </TABLE> <P> </P> <P><FONT size="3"><STRONG>August 2018</STRONG></FONT></P> <P><FONT size="3"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Straight-duct-auto-length-overridden-by-Fittings-Specifications-length-in-Fabrication-CADmep" target="_blank">Straight duct auto length is overridden by Fittings Specifications length in Fabrication CADmep</A></FONT></P> <TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"><COLGROUP><COL width="825" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"How to assign a specific machine to a material in Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-assign-a-specific-machine-to-a-material-in-Fabrication-CAMduct" target="_blank">How to assign a specific machine to a material in Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Parts are nested on new sheet instead of available ones with enough space in CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Parts-are-nested-on-new-sheet-instead-of-available-ones-with-enough-space-in-CAMduct" target="_blank">Parts are nested on new sheet instead of available ones with enough space in CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to generate multiple Spool drawings with Fabrication CADmep"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-generate-multiple-Spool-drawings-with-Fabrication-CADmep" target="_blank">How to generate multiple Spool drawings with Fabrication CADmep</A></TD> </TR> </TBODY> </TABLE> <TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"><COLGROUP><COL width="797" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Connector Fold Slits applied on outer part profile in CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Connector-Fold-Slits-applied-on-outer-part-profile-in-CAMduct" target="_blank">Connector Fold Slits applied on outer part profile in CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"CAMduct crashes when importing DXF file"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/CAMduct-crashes-when-importing-DXF-file" target="_blank">CAMduct crashes when importing DXF file</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to configure Straight CID 866 in CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-configure-Straight-CID-866-in-CAMduct" target="_blank">Unable to configure Straight CID 866 in CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Seam annotations appear flipped on CAMduct Oversize labels"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Seam-annotations-appear-flipped-on-CAMduct-Oversize-labels" target="_blank">Seam annotations appear flipped on CAMduct Oversize labels</A></TD> </TR> </TBODY> </TABLE> <P> </P> <P> </P> <P><FONT size="3"><STRONG>July 2018</STRONG></FONT></P> <TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"><COLGROUP><COL width="917" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Fabrication Connector List does not show custom Connectors"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fabrication-Connector-List-does-not-show-custom-connectors" target="_blank">Fabrication Connector List does not show custom Connectors</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fabrication CAMduct does not generate NC file"}"> <P><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fabrication-CAMduct-does-not-generate-NC-file" target="_blank">Fabrication CAMduct does not generate NC file</A></P> <P><SPAN data-sheets-value="{"1":2,"2":"Quick Takeoff does not show all required fields in Autodesk Fabrication"}" data-sheets-userformat="{"2":8665857,"3":{"1":0},"11":4,"12":0,"14":{"1":2,"2":353217},"15":"Calibri, sans-serif","16":11,"21":1,"26":400}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Quick-Takeoff-does-not-show-all-required-fields-in-Autodesk-Fabrication" target="_blank">Quick Takeoff does not show all required fields in Autodesk Fabrication</A></SPAN></P> </TD> </TR> </TBODY> </TABLE> <TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"><COLGROUP><COL width="822" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Double Wall round collars are not cut out nor reported in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Double-Wall-round-collars-are-not-cut-out-nor-reported-in-Autodesk-Fabrication-CAMduct" target="_blank">Double Wall round collars are not cut out nor reported in Autodesk Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Can I assign the same number to similar items in Autodesk Fabrication CADmep"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Can-I-assign-the-same-number-to-similar-items-in-Autodesk-Fabrication-CADmep" target="_blank">Can I assign the same number to similar items in Autodesk Fabrication CADmep</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fabrication CAMduct: CID 51 - Reducer - unequal parts development"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fabrication-CAMduct-CID-51-Reducer-unequal-parts-development" target="_blank">Fabrication CAMduct: CID 51 - Reducer - unequal parts development</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Identical fittings do not have the same item number after renumbering in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Identical-fittings-do-not-have-the-same-item-number-after-renumbering-in-Autodesk-Fabrication" target="_blank">Identical fittings do not have the same item number after renumbering in Autodesk Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Item and Insulation assigned to the same layer in Fabrication CADmep"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Item-and-Insulation-assigned-to-the-same-layer-in-Fabrication-CADmep" target="_blank">Item and Insulation assigned to the same layer in Fabrication CADmep</A></TD> </TR> </TBODY> </TABLE> <TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"><COLGROUP><COL width="873" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Fold notches applied on Seams are not cut out in Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fold-notches-applied-on-Seams-are-not-cut-out-in-Fabrication-CAMduct" target="_blank">Fold notches applied on Seams are not cut out in Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to use two different bend fittings for an offset in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-use-two-different-bend-fittings-for-an-offset-in-Autodesk-Fabrication" target="_blank">How to use two different bend fittings for an offset in Autodesk Fabrication</A></TD> </TR> </TBODY> </TABLE> <TABLE dir="ltr" border="1" cellspacing="0" cellpadding="0"><COLGROUP><COL width="890" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Duct Board items do not display thickness in the CAMduct 3D preview"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Duct-Board-items-do-not-display-thickness-in-the-CAMduct-3D-preview" target="_blank">Duct Board items do not display thickness in the CAMduct 3D preview</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Duplicate entries of the same fitting on Fabrication Item Reports"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Duplicate-entries-of-the-same-fitting-on-Fabrication-Item-Reports" target="_blank">Duplicate entries of the same fitting on Fabrication Item Reports</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to export a report with all available Fabrication patterns"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-export-a-report-with-all-available-Fabrication-patterns" target="_blank">How to export a report with all available Fabrication patterns</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Items are not placed on the expected Service layer in Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Items-are-not-placed-on-the-expected-Service-layer-in-Autodesk-Fabrication" target="_blank">Items are not placed on the expected Service layer in Fabrication</A></TD> </TR> </TBODY> </TABLE> <P> </P> <P><FONT size="3"><STRONG>October 2017</STRONG></FONT></P> <P><SPAN data-sheets-value="{"1":2,"2":"Patterns CID 1206 and CID 1207 are missed in the Autodesk Fabrication content"}" data-sheets-userformat="{"2":8403841,"3":[null,0],"10":2,"11":0,"12":0,"14":[null,2,0],"15":"Calibri, sans-serif","16":11,"26":400}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Pattern-CID-1206-and-CID-1207-are-missed-in-the-Autodesk-Fabrication-content" target="_blank">Patterns CID 1206 and CID 1207 are missed in the Autodesk Fabrication content</A></SPAN> </P> <P><SPAN data-sheets-value="{"1":2,"2":"BIM 360 Team: Uploaded files not showing in the activity stream"}" data-sheets-userformat="{"2":276609,"3":[null,0],"10":2,"14":[null,2,0],"15":"Calibri","16":11,"21":1}"> </SPAN></P> <P><FONT size="3"><STRONG>September 2017</STRONG></FONT></P> <P> </P> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="712" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"How to turn off the Insulation in a Service in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-turn-off-the-Insulation-in-a-Autodesk-Fabrication-Service" target="_blank">How to turn off the Insulation in a Service in Autodesk Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Item Folders “Auto Arrange” is not available or inactive in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Item-Folders-Auto-Arrange-is-not-available-or-inactive-in-Autodesk-Fabrication" target="_blank">Item Folders “Auto Arrange” is not available or inactive in Autodesk Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to apply staggered seams on Segment Bends in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-apply-staggered-seams-on-Segment-Bends-in-Autodesk-Fabrication-CAMduct" target="_blank">How to apply staggered seams on Segment Bends in Autodesk Fabrication CAMduct</A></TD> </TR> </TBODY> </TABLE> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="712" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"How To filter report data in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-To-filter-report-data-in-Autodesk-Fabrication" target="_blank">How To filter report data in Autodesk Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Warning: “Bad INI file load” while starting the Autodesk Fabrication CAMduct DNC downloade"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Warning-Bad-ini-file-while-starting-the-Autodesk-Fabrication-CAMduct-DNC-downloader" target="_blank">Warning: “Bad INI file load” while starting the Autodesk Fabrication CAMduct DNC downloade</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to print a report for specific items in Autodesk Fabrication Tracker"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-print-a-report-for-specific-items-in-Autodesk-Fabrication-Tracker" target="_blank">How to print a report for specific items in Autodesk Fabrication Tracker</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to set a different language for a specific Configuration in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-To-set-a-different-Language-for-a-specific-Configuration-in-Autodesk-Fabrication" target="_blank">How to set a different language for a specific Configuration in Autodesk Fabrication</A></TD> </TR> </TBODY> </TABLE> <P> </P> <P><FONT size="3"><STRONG>August 2017</STRONG></FONT></P> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="698" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Fabrication CADmep 2018: Hanger - Take Off as Cut In not sized per insulation"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fabrication-CADmep-2018-Hanger-Take-Off-as-Cut-In-not-sized-per-insulation" target="_blank">Fabrication CADmep 2018: Hanger - Take Off as Cut In not sized per insulation</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"CADMEP 2017 CID 521 elevation changes"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/CADMEP-2017-CID-521-elevation-changes" target="_blank">CADMEP 2017 CID 521 elevation changes</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Design Line does not fill-in bend nodes in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Design-Line-does-not-fill-in-bend-nodes-in-Autodesk-Fabrication" target="_blank">Design Line does not fill-in bend nodes in Autodesk Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Duct Couplings are not taken off automatically for specific pipe diameters in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Duct-Couplings-are-not-taken-off-automatically-for-specific-pipe-diameters-in-Autodesk-Fabrication" target="_blank">Duct Couplings are not taken off automatically for specific pipe diameters in Autodesk Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Labour Rate mismatching between Estimating Summary and Cost Breakdown in Autodesk Fabrication ESTmep"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Labour-Rate-mismatching-between-Estimating-Summary-and-Cost-Breakdown-in-Autodesk-Fabrication-ESTmep" target="_blank">Labour Rate mismatching between Estimating Summary and Cost Breakdown in Autodesk Fabrication ESTmep</A></TD> </TR> </TBODY> </TABLE> <P> </P> <P><FONT size="3"><STRONG>July 2017</STRONG></FONT></P> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="698" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to set default seams in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-set-default-seams-in-Autodesk-Fabrication" target="_blank">Unable to set default seams in Autodesk Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Workflow Revit MEP/Fabrication CADMep without losing calculated values"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Workflow-Revit-MEP-Fabrication-CADMep-without-losing-calculated-values" target="_blank">Workflow Revit MEP/Fabrication CADMep without losing calculated values</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Size Block values invert their position while changing view in Autodesk Fabrication CADmep"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Size-Block-values-switch-position-while-changing-view-in-Autodesk-Fabrication-CADmep" target="_blank">Size Block values invert their position while changing view in Autodesk Fabrication CADmep</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Opus Note Text disappears in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Opus-Note-Text-disappears-in-Autodesk-Fabrication-CAMduct" target="_blank">Opus Note Text disappears in Autodesk Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to display material color on Labels and Worksheets in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-display-material-color-on-labels-in-Autodesk-Fabrication" target="_blank">How to display material color on Labels and Worksheets in Autodesk Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to add or remove Annotations on graphical report views in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-add-or-remove-annotations-on-graphical-report-views-in-Autodesk-Fabrication" target="_blank">How to add or remove Annotations on graphical report views in Autodesk Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to change the seam position of a round Tee in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-the-seam-position-of-a-round-Tee-in-Autodesk-Fabrication" target="_blank">How to change the seam position of a round Tee in Autodesk Fabrication</A></TD> </TR> </TBODY> </TABLE> <P> </P> <P><FONT size="3"><STRONG>June 2017</STRONG></FONT></P> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="499" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Error: “Access is denied. (error opening deferred file)” while writing NC file in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Access-is-denied-error-opening-deferred-file-while-writing-NC-file-in-Autodesk-Fabrication-CAMduct" target="_blank">Error: “Access is denied. (error opening deferred file)” while writing NC file in Autodesk Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Fabrication CADmep: hidden lines for insulation do not appear on rectangle duct and double wall oval duct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Fabrication-CADmep-hidden-lines-for-insulation-do-not-appear-on-rectangle-duct-and-double-wall-oval-duct" target="_blank">Fabrication CADmep: hidden lines for insulation do not appear on rectangle duct and double wall oval duct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Item Data exported from Autodesk Fabrication does not show all items"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Item-Data-exported-from-Autodesk-Fabrication-does-not-show-all-items" target="_blank">Item Data exported from Autodesk Fabrication does not show all items</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Error: “Error 2 - Unable to Open File” while taking off an Item from the Service Palette in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Error-Unable-to-Open-File-while-taking-off-an-Item-from-the-Service-Palette-in-Autodesk-Fabrication" target="_blank">Error: “Error 2 - Unable to Open File” while taking off an Item from the Service Palette in Autodesk Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to create a shortcut to Autodesk Fabrication CADmep"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-create-a-shortcut-to-Autodesk-Fabrication-CADmep" target="_blank">How to create a shortcut to Autodesk Fabrication CADmep</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Missed notches on nested parts in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Missed-notches-on-nested-parts-in-Autodesk-Fabrication-CAMduct" target="_blank">Missed notches on nested parts in Autodesk Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Parts are not nested nor available for nesting in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Parts-are-not-nested-nor-available-for-nesting-in-Autodesk-Fabrication-CAMduct" target="_blank">Parts are not nested nor available for nesting in Autodesk Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Vee Notches depth not as expected on nested parts in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Vee-Notches-depth-not-as-expected-on-nested-parts-in-Autodesk-Fabrication-CAMduct" target="_blank">Vee Notches depth not as expected on nested parts in Autodesk Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to merge multiple jobs in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-merge-multiple-jobs-in-Autodesk-Fabrication-CAMduct" target="_blank">How to merge multiple jobs in Autodesk Fabrication CAMduct</A></TD> </TR> </TBODY> </TABLE> <P> </P> <P><FONT size="3"><STRONG>May 2017</STRONG></FONT></P> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="457" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Box Saddle pattern developments not notched out as expected in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Box-Saddle-pattern-developments-not-notched-out-as-expected-in-Autodesk-Fabrication-CAMduct" target="_blank">Box Saddle pattern developments not notched out as expected in Autodesk Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Development parts missed in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Development-parts-missed-in-Autodesk-Fabrication-CAMduct" target="_blank">Development parts missed in Autodesk Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to change the Feed Rate for specific gauges/materials in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-the-Feed-Rate-for-specific-gauges-materials-in-Fabrication-CAMduct" target="_blank">How to change the Feed Rate for specific gauges/materials in Autodesk Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to set a default sheet size for oversize parts in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-set-a-default-sheet-size-for-oversize-parts-in-Autodesk-Fabrication-CAMduct" target="_blank">How to set a default sheet size for oversize parts in Autodesk Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Items icons not displayed in Autodesk Fabrication CAMduct 2016"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Items-icons-not-displayed-in-Autodesk-Fabrication-CAMduct-2016" target="_blank">Items icons not displayed in Autodesk Fabrication CAMduct 2016</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Material Selection does not show all available sheet sizes on Oversize parts in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Material-Selection-does-not-show-all-available-sheet-sizes-on-Oversize-parts-in-Autodesk-Fabrication-CAMduct" target="_blank">Material Selection does not show all available sheet sizes on Oversize parts in Autodesk Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Oversize Seam Notches not applied when set to \u201cDefault Oversize Notch\u201d in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Oversize-Seam-Notches-not-applied-when-set-to-Default-Oversize-Notch-in-Autodesk-Fabrication" target="_blank">Oversize Seam Notches not applied when set to “Default Oversize Notch” in Autodesk Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to nest items in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-nest-items-in-Autodesk-Fabrication-CAMduct" target="_blank">Unable to nest items in Autodesk Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to rotate parts while nesting manually in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-rotate-parts-while-nesting-manually-in-Autodesk-Fabrication-CAMduct" target="_blank">Unable to rotate parts while nesting manually in Autodesk Fabrication CAMduct</A></TD> </TR> </TBODY> </TABLE> <P><EM> </EM></P> <P><EM><FONT size="3"><STRONG>April 2017</STRONG></FONT></EM></P> <TABLE dir="ltr" border="0" cellspacing="0" cellpadding="0"><COLGROUP><COL width="609" /></COLGROUP> <TBODY> <TR> <TD data-sheets-value="{"1":2,"2":"Unable to apply Specifications to a selection of job items in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Unable-to-apply-Specifications-to-a-selection-of-job-items-in-Autodesk-Fabrication" target="_blank">Unable to apply Specifications to a selection of job items in Autodesk Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"CADmep toolbar is not displaying in Fabrication CADmep"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/CADmep-toolbar-is-not-displaying-in-Fabrication-CADmep" target="_blank">CADmep toolbar is not displaying in Fabrication CADmep</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Holes on Straight Duct always applied on the bottom face in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Holes-on-Straight-Duct-always-applied-on-the-bottom-face-in-Autodesk-Fabrication" target="_blank">Holes on Straight Duct always applied on the bottom face in Autodesk Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to change the default geometry colors in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-change-the-default-geometry-colors-in-Autodesk-Fabrication-CAMduct" target="_blank">How to change the default geometry colors in Autodesk Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"How to add Item information on Nest Prints in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/How-to-add-Item-information-on-Nest-Prints-in-Autodesk-Fabrication-CAMduct" target="_blank">How to add Item information on Nest Prints in Autodesk Fabrication CAMduct</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Item Area or Weight not reported as expected in Autodesk Fabrication"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Item-Area-or-Weight-not-reported-as-expected-in-Autodesk-Fabrication" target="_blank">Item Area or Weight not reported as expected in Autodesk Fabrication</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Optimizing drawings within CADmep to avoid slow performance"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Optimizing-drawings-within-CADmep-to-avoid-slow-performance" target="_blank">Optimizing drawings within CADmep to avoid slow performance</A></TD> </TR> <TR> <TD data-sheets-value="{"1":2,"2":"Seam allowance not applied on Oversize Parts in Autodesk Fabrication CAMduct"}"><A class="in-cell-link" href="http://knowledge.autodesk.com/article/Seam-allowance-not-applied-on-Oversize-Parts-in-Autodesk-Fabrication-CAMduct" target="_blank">Seam allowance not applied on Oversize Parts in Autodesk Fabrication CAMduct</A></TD> </TR> </TBODY> </TABLE> <P><EM> </EM></P> <P><EM><FONT size="3"><STRONG>March 2017</STRONG></FONT></EM><BR /> <A href="http://knowledge.autodesk.com/article/How-To-configure-material-depending-Nesting-Margins-in-Autodesk-Fabrication-CAMduct" target="_blank">How to configure material depending Nesting Margins in Autodesk Fabrication CAMduct</A><BR /> <A href="http://knowledge.autodesk.com/article/How-To-setup-Splitter-Vanes-in-Autodesk-Fabrication" target="_blank">How to setup Air Turn and Splitter vanes in Autodesk Fabrication</A> </P> <P><A href="http://knowledge.autodesk.com/article/How-to-mark-items-information-on-nested-parts-in-Autodesk-Fabrication-CAMduct" target="_blank">How to mark items information on nested parts in Autodesk Fabrication CAMduct</A> </P> <P> </P> <P><FONT size="3"><STRONG>February 2017</STRONG></FONT></P> <P><A href="http://knowledge.autodesk.com/article/Cost-Breakdown-does-not-show-Stiffeners-in-Autodesk-Fabrication" target="_blank">Cost Breakdown or Reports do not show stiffeners in Autodesk Fabrication</A></P> <P> </P> <P><FONT size="3"><STRONG>January 2017</STRONG></FONT></P> <P><A href="http://knowledge.autodesk.com/article/Error-Unable-to-lock-the-File-message" target="_blank">Error: “Unable to lock the file” message while opening a Job in Autodesk Fabrication</A>  <A href="http://knowledge.autodesk.com/article/How-To-edit-the-CNC-path-in-Autodesk-Fabrication-CAMduct" target="_blank">How To edit the CNC path in Autodesk Fabrication CAMduct</A> </P> <P> </P> <P> </P> Wed, 31 Oct 2018 17:35:07 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/latest-updates-new-knowledge-network-articles-fabrication-cadmep/m-p/7003621#M2358 matthew.d 2018-10-31T17:35:07Z