topic Problem with Makepat in Fabrication CADmep Forum https://forums.autodesk.com/t5/fabrication-cadmep-forum/problem-with-makepat/m-p/6841318#M2251 <P>I was trying to create a simple component (a flange) was able to get all the dimensions correct no issue, but when I tried to add a piece of pipe one of the dimensions suddenly changed from 1.31 to 2 (the default measurement). I used the command showmethediffs to compare it to an AutoCAD created flange, I made a few changes to make it work better but it kept changing dimensions on me back to the default.</P> <P>&nbsp;</P> <P>Is there anything that I need to change or modified in my settings?</P> <P>&nbsp;</P> <P>Attached is the ITM creation box.</P> <P>&nbsp;</P> <P>Would have attached the ITM files but the format is not supported</P> Mon, 30 Jan 2017 19:27:49 GMT Anonymous 2017-01-30T19:27:49Z Problem with Makepat https://forums.autodesk.com/t5/fabrication-cadmep-forum/problem-with-makepat/m-p/6841318#M2251 <P>I was trying to create a simple component (a flange) was able to get all the dimensions correct no issue, but when I tried to add a piece of pipe one of the dimensions suddenly changed from 1.31 to 2 (the default measurement). I used the command showmethediffs to compare it to an AutoCAD created flange, I made a few changes to make it work better but it kept changing dimensions on me back to the default.</P> <P>&nbsp;</P> <P>Is there anything that I need to change or modified in my settings?</P> <P>&nbsp;</P> <P>Attached is the ITM creation box.</P> <P>&nbsp;</P> <P>Would have attached the ITM files but the format is not supported</P> Mon, 30 Jan 2017 19:27:49 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/problem-with-makepat/m-p/6841318#M2251 Anonymous 2017-01-30T19:27:49Z Re: Problem with Makepat https://forums.autodesk.com/t5/fabrication-cadmep-forum/problem-with-makepat/m-p/6899591#M2291 <P>Sorry I dont see the ITM attached, only the PDF</P> <P>Can you add the Flange itm and a pipe to a DWG and upload that?</P> Thu, 23 Feb 2017 20:23:03 GMT https://forums.autodesk.com/t5/fabrication-cadmep-forum/problem-with-makepat/m-p/6899591#M2291 andy.robins 2017-02-23T20:23:03Z