Hi all,
Is this a bug or something else?
In AutoCAD Architecture 2008 SP1
Draw a line 0,0,0 0,1,0 1,1,0 1,2,0
Command: (ssnamex (ssget))
Select objects: fence
Specify first fence point: -0.5,0,0
Specify next fence point or [Undo]: 1.5,2,0
Specify next fence point or [Undo]:
3 found
Select objects:
((4 0 (0 (1.97906e-009 0.5 1280.64))) (4
7efa0a38> 0 (0 (0.5 1.0 1280.64))) (4 0 (0 (1.0 1.5
1280.64))))
Look at the z value
And with Autodesk Architectural Desktop 2007
((4 0 (0 (-0.000136682 0.500086 0.0))) (4
7ed2a2a0> 0 (0 (0.499784 0.999953 0.0))) (4 0 (0
(1.00003 1.50001 0.0))))
What goes wrong?
Thx in advance
Harrie