Vault General Discussion

Vault General Discussion

Reply
Mentor
CAD-One
Posts: 760
Registered: ‎10-26-2008
Message 1 of 3 (141 Views)
Accepted Solution

Lifecycle states for Parts or Drawings

141 Views, 2 Replies
09-09-2011 11:22 AM

Which one should go thru the Lifecycle states; Part or Drawing. OR Both?

Whats the best practice?

C1
Inventor Professional 2015
Vault Professional 2015

Of course there are good arguments for both scenerios.

 

I have always felt that both model and drawing should be controled by lifecycle and revisions.

The reason that I beleive this to be true is that if you control the drawing but not the model it can very dificult to "lock down" a released drawing. For example; if you release a drawing and lock it for edit but do not lock down the model, the next time you open the drawing it migh change if the model has been updated. This of course can be bad for a released drawing.

 

Because of this I would also have the model control by revisions as well. This way the drawing will be linked to a given revision of the model and not just the latest changes. This helps ensure that if you open a historical reivison of the drawing it will always reflect what was released, and will not change.

 

Hope this helps.

Employee
mikel.martin
Posts: 281
Registered: ‎03-16-2006
Message 2 of 3 (131 Views)

Re: Lifecycle states for Parts or Drawings

09-10-2011 05:19 PM in reply to: CAD-One

Of course there are good arguments for both scenerios.

 

I have always felt that both model and drawing should be controled by lifecycle and revisions.

The reason that I beleive this to be true is that if you control the drawing but not the model it can very dificult to "lock down" a released drawing. For example; if you release a drawing and lock it for edit but do not lock down the model, the next time you open the drawing it migh change if the model has been updated. This of course can be bad for a released drawing.

 

Because of this I would also have the model control by revisions as well. This way the drawing will be linked to a given revision of the model and not just the latest changes. This helps ensure that if you open a historical reivison of the drawing it will always reflect what was released, and will not change.

 

Hope this helps.



Mikel Martin
User Experience Architect
PLM / Data Management
Autodesk, Inc.
njt
New Member
njt
Posts: 1
Registered: ‎09-14-2011
Message 3 of 3 (97 Views)

Re: Lifecycle states for Parts or Drawings

09-14-2011 06:27 PM in reply to: mikel.martin

So how exactly do you "lock down" the model?

 

The drawing is locked because it saves a different VERSION each time.

 

But you can open a model, change, save, and then next time you open it, you have no way to get back to the previous "version".

 

Are you suppose to SAVE AS the file and add a "digit" to the end to differenciate?

 

5402

5402A

5402B

5402C........etc?

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.

Announcements
New button for Platinum & Gold Subscription customers
Gold & Platinum Subscription customers can alert Autodesk if they require assistance with their forum post

Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.