AutoCAD Utility Design Forum (Read Only)
Welcome to Autodesk’s AutoCAD Utility Design Forums. Share your knowledge, ask questions, and explore popular AutoCAD Utility Design topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

AUD Line Lengths

5 REPLIES 5
Reply
Message 1 of 6
heberpower
2241 Views, 5 Replies

AUD Line Lengths

Me again, hey does any body know why my line lengths are wrong in AUD? If I list a line using the "LIST" command the length is correct, when I use the "AUDINFO" command the lengths are incorrect. For expample I just listed an underground primary line that measures 134.78 Meters using the standard "LIST" command. When I use AUDINFO I get a measurement of 5586. Any help would be great!

Thanks in advance.
5 REPLIES 5
Message 2 of 6
heberpower
in reply to: heberpower

After some more digging I have discovered that the measurements are off by exactly 40....Please help.
Message 3 of 6
heberpower
in reply to: heberpower

I have figured out more of my problem but not all...when I invoke the UDSDWGSTAT command I get this result:

The scale of this drawing is 40 and model number 0.

I need to know the command to change the 40 to a 1...Anyone?

Thanks
Message 4 of 6

AUDINFO calculates additional wire length based on the connected structure, and the value set in configuration.
Make a note of the structure connected to the wire, then look in the configuration:
AUDCONFIG > Facilities > Structure
On the block name, "Additional Wire" will likely be 40.
Jeff Paquette
Data Management Support Specialist
Autodesk, Inc.
Message 5 of 6
CornDawg
in reply to: heberpower

Well Heberpower,
Did this help?

Thanks Corn
Message 6 of 6
heberpower
in reply to: heberpower

I figured ot out...Somehow SETVAR "useri1" was set to 40, changed it to 1 and everything is good now.

Thanks for all your help!

Heber Power

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

”Boost

 

”Tips

 

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New Utility Design Category!

The Utility Design forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.