Community
Fusion Design, Validate & Document
Stuck on a workflow? Have a tricky question about a Fusion (formerly Fusion 360) feature? Share your project, tips and tricks, ask questions, and get advice from the community.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Bug with extrude using "To" extends with "both sides"

1 REPLY 1
Reply
Message 1 of 2
bradphelan
179 Views, 1 Reply

Bug with extrude using "To" extends with "both sides"

I have a simple model with two pipes as below

 

Autodesk_Fusion_360.jpg

 

I then try to join the two pipes with a horizontal pipe via an axis as below. I select extents to be "To" and

select the right vertical pipe. The extrusion works and mates with the pipe.

 

tb_FusionExtrudeEditCommand_and_tb_NavToolbar.jpg

 

I then extude to the other pipe and I get

 

tb_FusionExtrudeEditCommand_and_tb_NavToolbar.jpg

 

It cuts through the body of the reference pipes. I have the model here in the gallery

 

https://fusion360.autodesk.com/projects/extrusion-bug-example

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tags (2)
1 REPLY 1
Message 2 of 2
SallyYang
in reply to: bradphelan

Thanks for reporting this issue to us, we have reported to our development team and will resolve it in future releases.
Regards,
Sally


Sally Yang
Software QA Engineer
Fusion 360 Quality Assurance Team
Autodesk, Inc.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report