Discussion Groups

Simulation Moldflow Insight

Reply
*Expert Elite*
madhukeshwart
Posts: 289
Registered: ‎03-18-2009
Accepted Solution

Occurence number for Part inserts.

323 Views, 2 Replies
03-20-2013 02:53 AM

We are trying to run only fill analyses (3D)  for multi cavity mold with parts inserts with applying occurrence number.

 

We could able to apply occurrence number to parts elements, feed system beam elements, but we could not assign occurrence number parts inserts (tetra elements).

 

As per mold flow help, it should be possible to assign a occurrence to parts inserts also, but we failed to assign occurrence number. Moldflow_help_screen_capture.png

 

 

But when we try to applying occurrence number to parts inserts (3D) at properties, there is no option for occurrence number.

 

 

 

Is it possible to apply occurrence to part insert or not?  

 

If yes how to apply? If not any other alternative to do so?

 

Regards,

Madhukeshwar Talwar

 

Madhukeshwar Talwar

FIAT-CHRYSLER ATC, Chennai
mail: madhukeshwart@gmail.com
09600060862
======================================
Please use . Accept as Solution and Give Kudos as appropriate to further enhance these forums. Thank you! .....
Please use plain text.
New Member
sdpimple
Posts: 2
Registered: ‎01-14-2013

Re: Occurence number for Part inserts.

03-20-2013 07:39 AM in reply to: madhukeshwart

 

Hi madhu

 

I know in Core shift analysis you can not apply occurance number for the 3D core

 

Part insert in 3D analysis it is not possible to apply occurance number to part insert

 

TC

Sadashiv  

 

 

 

 

Please use plain text.
Product Support
nordhb
Posts: 472
Registered: ‎03-23-2009

Re: Occurence number for Part inserts.

03-22-2013 03:28 AM in reply to: sdpimple

Hi,

you do not need Occurrence number for part insert.
Occurence numbers are used by the flow solver basically as a factor for the volume of material to fill.
It is there to simplify the model, and to take into account the different identical flow paths and cavities in volume calculation.

The occurrence number property is not supported for:
  • All Cool analysis related entities (channel, bubbler, baffle, hose, part insert).
  • Core (Stress analysis used for core shift prediction does not support occurrence numbers).
Note: Occurrence numbers are supported for Fill+Pack analyses only. If you intend to also run a Cool or Warp analysis, you will need to model all flow paths explicitly.

I believe the help information needs to be updated.

Regards,
Berndt


Berndt Nordh
Please use plain text.