Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I recently ran some 3D studies. I set my maximum clamp force and checked the box for "Do not exceed maximum clamp force". However, when the studies ran through, they far exceeded the set clamp limitations. This works in dual domain. Does 3D not attempt to stay within the specified clamp force? Thanks for the help.
I am having the same issue. I looks as if the limitation has not beed added for 3D analysis. Does anyone know of a way to make this work? As far as I know, all it does is reduce the pressure during fill/pack to keep the clamp force under the limit.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")