Discussion Groups

Simulation Moldflow Insight

Reply
Contributor
nilza.reis
Posts: 20
Registered: ‎05-16-2012
Accepted Solution

Material (.udb)

723 Views, 5 Replies
08-28-2012 08:43 AM

It is possible to send the material “Schulablend M / MW NC100” format udb to put in Moldflow. Thank you!

Please use plain text.
Product Support
nordhb
Posts: 455
Registered: ‎03-23-2009

Re: Material (.udb)

08-30-2012 05:04 AM in reply to: nilza.reis

Hi,

what you can do:
- Contact the material supplier and ask for an udb-file for the material

- If you have measured data, raw data, of material you can contact
datafittingmoldflow@autodesk.com
and get measured data fitted and an udb-file for analysis in return.
(material supplier might have measured data of this material?)

Autodesk Moldflow Plastics Labs information at:
http://usa.autodesk.com/adsk/servlet/item?id=13151393&siteID=123112&linkID=13030537 

Hope this helps.
Regards,
Berndt



Berndt Nordh
Please use plain text.
Contributor
nilza.reis
Posts: 20
Registered: ‎05-16-2012

Re: Material (.udb)

08-30-2012 07:18 AM in reply to: nilza.reis

Thank you

Please use plain text.
Contributor
kgonzal5
Posts: 15
Registered: ‎06-03-2011

Material (.udb) Optix CA-924

03-20-2013 01:13 PM in reply to: nordhb

Hello.
I can't find the udb file for Optix CA-924 produced by Plaskolite West
This is the data shee I found, but certainly I don't know how to create a confident udb from this.
 http://www.plaskolite.com/Product/DownloadProperties/4877

 

I'm using 2012 version, do you have the udb already in the 2013 or somewhere else I can find it?

Thank you!

Please use plain text.
Product Support
nordhb
Posts: 455
Registered: ‎03-23-2009

Re: Material (.udb) Optix CA-924

03-21-2013 02:57 AM in reply to: kgonzal5

Hi,
the material data of Optix CA-924 is currently not available in official material database of Autodesk Simulation Moldflow Synergy 2013, SP2.
The manufacturer is currently not in the material database.

The data from a Technical Data Sheet (TDS) is generally too generic, having too less information to create an udb-file as no coefficients for viscosity or PVT models normally available and more data such as thermal properties (maybe available as single point), transition temperature, etc.
So creating a confident udb-file from a TDS is basically not possible.

Some material suppliers has udb-files to send that are not in official material database.
Please, contact the material supplier and ask for an udb-file for the material.

Or do as I posted previous to this topic to contact Autodesk Moldflow Plastics Labs.

Regards,
Berndt



Berndt Nordh
Please use plain text.
Contributor
kgonzal5
Posts: 15
Registered: ‎06-03-2011

Re: Material (.udb) Optix CA-924

03-21-2013 06:07 AM in reply to: nordhb
Thank you very much
Please use plain text.