Discussion Groups

Simulation Moldflow Insight

Reply
Valued Contributor
tim.vanast
Posts: 75
Registered: ‎07-17-2009
Accepted Solution

gate mesh vs gate results differences

644 Views, 2 Replies
11-03-2011 06:17 AM

Has anyone seen this difference between the gate mesh and the gate results?  See attached pictures.

 

If so, are the results correct to how the gate was modeled, or to how it appears in the results.

 

The part is a 3D mesh.  The runner and gate are beam elements.

 

Thanks,


Tim

Please use plain text.
Active Contributor
toofewfish
Posts: 27
Registered: ‎03-19-2009

Re: gate mesh vs gate results differences

11-03-2011 06:43 AM in reply to: tim.vanast

I have reported this as a bug starting with 2011.  It gets difficult to explain to people that have limited knowledge of moldflow analysis results that this is just a visual anomaly.

 

Haven't heard a word about anybody trying to fix this issue in the software.

Please use plain text.
Valued Contributor
tim.vanast
Posts: 75
Registered: ‎07-17-2009

Re: gate mesh vs gate results differences

11-07-2011 05:02 AM in reply to: toofewfish

Thanks.  That's what I was guessing, but I wanted to be sure.

 

Best regards,

 

Tim

Please use plain text.