Discussion Groups

Simulation Moldflow Insight

Reply
Contributor
Gui_81
Posts: 12
Registered: ‎06-01-2009

Cooling using oil

128 Views, 0 Replies
07-09-2013 10:08 AM

Hi all,

 

I have a cooling analysis to be done with channels using oil instead water.

For this cases is applicable the same principle as the water cooling channels, that is using a temperature 10-15C lower than the mold temperature or its exactly the opposite and we should define the temperature at cooling channels higher than the mold surface temperature.

 

Melt temperature - 350C

Mold temperature - 150C

Cooling channels - ??

 

Thanks in advance,

Gui

 

Please use plain text.