Discussion Groups

Simulation Moldflow Insight

Reply
Member
greeen7
Posts: 3
Registered: ‎01-10-2012

3D Cool analysis results not available showing -273.1°C

152 Views, 1 Replies
04-09-2013 10:55 PM

I have made a cool analysis for a 3D tetra mesh component, the analysis is running fine without errors but none of the cool results are not available. This gets solved if the flow rate is changed and also if it is run with fusion/DD meshed part. The part has been meshed in CATIA and imported in AMI 2012 with nastran format. I have tried with remeshing in moldflow as well.

 

Software: AMI 2012 with SP2

Coolant: water

coolant flow rate: 5L/min

coolant inlet temp: 60°C

cooling line dimensions: Channel 10mm dia and baffle 19mm dia

 

please have a look at the attached pictures one with flow rate 5L/min and another picture with 6L/min

Please use plain text.
Product Support
nordhb
Posts: 480
Registered: ‎03-23-2009

Re: 3D Cool analysis results not available showing -273.1°C

04-10-2013 01:16 AM in reply to: greeen7

Hi,

recommend you to upgrade to the latest release, Autodesk Simulation Moldflow Insight 2014.

Regards,

Berndt



Berndt Nordh
Please use plain text.