Discussion Groups

Simulation Moldflow Adviser

Reply
Contributor
lalakiross
Posts: 14
Registered: ‎01-06-2012

Re: Model Defects - 3D Analysis Disabled

01-18-2012 05:11 AM in reply to: nordhb

Hi Berndt,

 

I found out our University has some seats of Insight 2012 and the model worked perfectly! No glitches, no errors, it just worked :smileyhappy:

 

My laptop is a Mac and unfortunately no Inventor or Moldflow for that platform yet. I also cannot install software on the university computers, don't have access on that front, but Insight is working perfectly with no hitches so far.

 

Thanks You for all your time and support. I'll advise the IT people to remove the 2010 Adviser because its awful and upgrade to 2012 or use Insight instead.

 

Best Regards

 

Ross  

Please use plain text.
Product Support
nordhb
Posts: 464
Registered: ‎03-23-2009

Re: Model Defects - 3D Analysis Disabled

01-18-2012 05:42 AM in reply to: lalakiross

Hi Ross,

thank you for the feedback.

Yes, good if you can install the latest release, and remove the older to avoid issues.
Insight 2012 will be a good tool for you, also opening the availability to include mold/part inserts in simulation.

Regards,
Berndt



Berndt Nordh
Please use plain text.