Discussion Groups

Simulation Moldflow Adviser

Reply
Valued Contributor
dinesh27mec
Posts: 68
Registered: ‎01-19-2014
Accepted Solution

iNTERFACING MOLDFLOW ADVISER 2014 WITH ANSYS

379 Views, 2 Replies
01-19-2014 10:45 PM

Hi,

I need to interface my MFA 2014 results with ANSYS for structural analysis. Whether its possible ??

 

Thanks in advance

Dinesh Kumar D
Please use plain text.
Product Support
nordhb
Posts: 480
Registered: ‎03-23-2009

Re: iNTERFACING MOLDFLOW ADVISER 2014 WITH ANSYS

01-20-2014 02:34 AM in reply to: dinesh27mec

Hi,
there is a product called Autodesk Moldflow Structural Alliance 2014, AMSA.
AMSA maps mechanical properties calculated by Moldflow to Ansys.

You need Autodesk Simulation Moldflow Adviser Ultimate 2014
(see: http://www.autodesk.com/products/autodesk-simulation-family/compare/moldflow-products )

Compatible software.
ANSYS Classic 12.1 and 14, 32- and 64-bit versions
ANSYS Workbench 12.1 and 14, 32- and 64-bit versions

You can find Autodesk Moldflow Structural Alliance for download at the subscription center.
http://subscription.autodesk.com/
You need a valid account to access.

Note: All ANSYS analysis calculations that use Autodesk Moldflow Structural Alliance 2014 are based on a linear elastic material.
You have more details in the Autodesk Moldflow Structural Alliance, AMSA, installation guide which is available to download with the software.

Hope this helps.
Regards,
Berndt



Berndt Nordh
Please use plain text.
Product Support
nordhb
Posts: 480
Registered: ‎03-23-2009

Re: iNTERFACING MOLDFLOW ADVISER 2014 WITH ANSYS

01-20-2014 02:38 AM in reply to: nordhb

Hi,

please, also have a look at this:

 

http://forums.autodesk.com/t5/Simulation-Moldflow-Adviser/Autodesk-Moldflow-Structural-Alliance-2014...

 

Regards,

Berndt



Berndt Nordh
Please use plain text.