Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Hi!
Importing iges curves for feed and cooling system from Pro-E wildfire 4.0, the measure of the channel is wrong.
Even if I have the same settings (mm) on both Pro-E and Moldflow, after the import the channel are in (inch x 10).
Anyone know how can I do without rescaling in the CAD?
Thank you in advance
Marco,
Which measurement is wrong? The diameter or the spacing? When I use the import runner function on AMA2010-R2, the runner diameter is based on the current default setting, not anything from CAD. (I import from I-Deas).
Check out this article for a how to.
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=14913760&linkID=13030537
Martin Schultz
Edited by: MartinSchultz on Apr 13, 2010 9:36 AM
thank you Martin, but the problem is about the curves' lenght. The leght in moldflow is 25,4 times more than real (2,54 factor mm-inches x 10 [i don't know, seems to be in centimeters instead mm]
I know ho wto set before the diameter, but probably is an option in Pro-E to let MOldflow recognize the correct unit system.
Bye
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")