Hi
When i tried to perform a fill analyse for 3 foot fan in MFA 2014, analysis doesnt proceeds beyond 68%. Till 68% it process the analysis within 15-20mins, but beyond that it doesnt proceed even after running it for more than 12hrs.
While performing pre- analysis check it didnt notify any warnings. So what will be the reason for this?
Thanks in advance.
Hi,
does it complete model preparation (meshing), and continue to fill analysis and output any intermediate result at all?
If meshing does not complete it is proabably model related.
First, make sure you have installed service packs.
Latest for Autodesk Simulation Moldflow Adviser is Service Pack 2.
Got to: http://www.autodesk.com/moldflow-support
Data & Downloads
Updates & Service Packs
If still issues, contact Autodesk Technical Support at subscription center:
http://subscription.autodesk.com/
And attach your study file and original cad geometry for further investigation.
Regards,
Berndt
Hi,
It completes model generation and proceeds to analysis, in fill analysis it doesnt go beyond 65 %
Now i have updated my software , from the link which you said.
Hi,
as still having issues, contact Autodesk Technical Support at subscription center:
http://subscription.autodesk.com/
And attach your study file and original cad geometry for further investigation.
Thank you.
Regards,
Berndt