Discussion Groups

Simulation Moldflow Adviser

New Member
Posts: 1
Registered: ‎11-02-2012
Accepted Solution

BASF Material Data

501 Views, 1 Replies
11-02-2012 12:24 AM

I use TPU from BASF grade Elastollan C98 material for my application. Pl inform if material data for this material is available in the material data base i.e. in .udb file.

If not, How can I get this file? If I have to do measurements and then through your center get a .udb file, pl advice what all data is required?

Please use plain text.
Product Support
Posts: 472
Registered: ‎03-23-2009

Re: BASF Material Data

11-13-2012 12:20 AM in reply to: viveksingal

Autodesk Moldflow Adviser 2013 SP2 does not have this material grade, Elastollan C 98, from what I can see.

The recommendation is to contact the material supplier to get an udb-file (material data file for analysis) of requested material.

If you have measured data, raw data, of material you can contact datafittingmoldflow@autodesk.com 
and they will provide documents where to enter raw data.
If all completed you will get measured data fitted and an udb-file for analysis in return.

You can also contact:
Autodesk Moldflow Plastics Labs
and test the material as service.


Berndt Nordh
Please use plain text.